HP C8000 unable to boot

[AUGUSTYNA]

Hello friends, I have recently replaced the motherboard of the C8000 system, so as have replaced the system board, I have powered on then it has come back to the BCH. So I have tried to boot the system, so when I was doing it then was giving me error. Any suggestion about it will be helpful for me. Thank you.

[ErikaGeek]

I would say that you better check that graphics card is been installed on the board or not. Also try to Re-check the right installation of it and check the external power of the card. Even check that all cables are been connected properly or not.

[AUGUSTYNA]

I have not installed the graphics card on to the system and even wanted to tell that I have not connected the keyboard and mouse to it. Then also facing the problem with it, does not know what I should do.

[fflygirl]

If you are getting the WARNING: No graphics or serial consoles were found on this system. Which means that there is no graphics card installed and it will keep giving you error? The system is not able to locate the card as it not installed in the system. The problem is that you should set the console path in BCH to serial to avoid the warning messages.

[phunsuk]

I would suggest that you better try to work out with the graphics card installed on it, and check that you are still getting the error again. If you are still getting then it is better that you set the console path in BCH to serial to avoid it.