Results 1 to 6 of 6

Thread: GIGABYTE X58A-UD3R takes 30sec to wake from sleep

  1. #1
    Join Date
    Dec 2011
    Posts
    72

    GIGABYTE X58A-UD3R takes 30sec to wake from sleep

    Hi guys I don't know what's wrong with this but When the pc resumes from sleep (S3), there is a period of about thirty seconds before the monitor turns on. throughout this time, there is a loud fan sound--probably from the GPU--which then subsides. Then the monitor turns on, and Windows is ready to log back in.
    My rig is
    • X58A-UD3R rev 2.0 BIOS FB
    • i7-950,
    • 6 GB OCZ Gold DDR3-1600,
    • OCZ Onyx SSD 64GB,
    • 2TB WD GreenPower SATA.
    • GTX 260, Windows 7 Pro x64.


    No over clocking, ACHI stop in BIOS. I’ve see previous Windows 7 PCs that start again from sleep in but 5 seconds. Do every X58A-UD3Rs take this lengthy time , or is that this a quirk of my setup?

  2. #2
    Join Date
    May 2011
    Posts
    1,675

    Re: GIGABYTE X58A-UD3R takes 30sec to wake from sleep

    I always avoid the sleep mode . I do have hibernate enabled in case of a PF. I did some testing since I have constant board (see sig). It takes regarding eighteen seconds to enter S3 and regarding ten seconds to resume. All my drives are on the Intel SATA two controller and also the controller is in AHCI mode. My Intel SSD boot drive is on port zero. Port 0-3 native mode is set to native mode (enabled). My WD knowledge drive is on port one and also the optical drives are on ports four and 5. i'm using Intel's RST nine.6 driver. The eSATA controller is in AHCI mode. USB three is enabled. The Marvell SATA three and Gigabyte SATA 2/IDE controllers are disabled. 1394 is also disabled. i'm employing a PS2 mouse and keyboard BTW. None of this may mean something however it would lead you somewhere

  3. #3
    Join Date
    May 2011
    Posts
    1,582

    Re: GIGABYTE X58A-UD3R takes 30sec to wake from sleep

    I might think the time taken to enter and resume from S3 would rely on the number and size of the programs you have got running when you enter S3. the number of Physical memory may additionally have an have an effect on. the only programs running throughout my testing was Firefox 3.6.10, Speedfan 4.42 b4, DiskCheckup 3.0 b1003 plus Avast 5 IS 5.0.667. USB devices linked, APC BX1000G UPS, HP C6380 printer and a MS FFB . The Realtek onboard NIC attach to a D-link 655 router.

  4. #4
    Join Date
    May 2011
    Posts
    1,510

    Re: GIGABYTE X58A-UD3R takes 30sec to wake from sleep

    You got me thinking that I had a look at my power settings and hybrid sleep was enabled thus I disabled it and retested. It currently takes 4-5 seconds to sleep and 4-5 seconds to resume. that's freaking fast! My last build must not of supported hybrid sleep because it was disabled by default thus I never payed shut attention on this build. Ah i do know what the difference was my previous board defaulted to S1 within the bios not S3, thus no hybrid sleep.

  5. #5
    Join Date
    Jul 2011
    Posts
    1,484

    Re: GIGABYTE X58A-UD3R takes 30sec to wake from sleep

    I had the similar downside and that i tried disable my 1384 moreover as my unused SATA controller, however it create no amendment to the resume from S3 time. I doubt if the holdup must do with my GTX 260 card. i feel it's the GPU fan that is running at the highest of your voice throughout the resume from S3 procedure, and the show stays off until the acute ending of the process; whereas it activates, the Windows login show is already displaying.

  6. #6
    Join Date
    Dec 2011
    Posts
    72

    Re: GIGABYTE X58A-UD3R takes 30sec to wake from sleep

    Look like doable to me It does sound quite doable. can you use newer drivers? Failing that try using some much older drivers as there are quite some problems with the later drivers.

Similar Threads

  1. Gigabyte X58A-UD3R USB overvoltage?
    By azizia1987 in forum Motherboard Processor & RAM
    Replies: 1
    Last Post: 17-01-2012, 07:18 PM
  2. Trouble with RAM in Gigabyte GA-X58A-UD3R (rev. 1.0)?
    By Leanne in forum Motherboard Processor & RAM
    Replies: 6
    Last Post: 07-08-2011, 11:00 PM
  3. Need Help with Gigabyte GA X58A-UD3R, RAM and other settings
    By rAdIaN in forum Motherboard Processor & RAM
    Replies: 6
    Last Post: 08-07-2011, 10:16 PM
  4. Gigabyte X58A-UD3R rev 1.0 trouble
    By Cosmonos in forum Motherboard Processor & RAM
    Replies: 3
    Last Post: 20-11-2010, 05:10 AM
  5. Gigabyte X58A-UD3R/ I7-930 need Overclocking Help
    By Talaketu2 in forum Overclocking & Computer Modification
    Replies: 4
    Last Post: 27-10-2010, 07:40 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,711,722,169.41357 seconds with 17 queries