Results 1 to 4 of 4

Thread: Wii Remote is not recognized by the Wii

  1. #1
    Join Date
    Feb 2009
    Posts
    27

    Wii Remote is not recognized by the Wii

    Hello, i am having certain problem with the wii Remote iam Having The Wii Remote is not recognized by the Wii (Although the lights on the Wii Remote flash when I press a button, but they go out immediately after) , Can you Tell me Why these happens and How can i Solve these problem thanks in advance

  2. #2
    Join Date
    May 2006
    Posts
    2,812

    Re: Wii Remote is not recognized by the Wii

    Ensure that the Wii recognizes (or "synchronized" with) the Wii Remote, especially if it was obtained separately from the Wii, then you may need to perform certain steps before it can synchronize. In addition, a Wii Remote that was working, but no longer works may have to be re-synchronized.

  3. #3
    Join Date
    Nov 2005
    Posts
    2,496

    Re: Wii Remote is not recognized by the Wii

    Please follow the troubleshooting steps below that solve most problems with the Wii Remote.

    Try these steps!

    Turn the Wii console by pressing the POWER button on the front of the console. Unplug the power cord from the electrical socket for a few seconds. After a few seconds have elapsed, plug the cable into the power.

    Turn the Wii console by pressing the POWER button again. When you see the screen "health and safety", open the little flap on the front of the console to find a red button titled "SYNC". SYNC Hold the button pressed for 15 seconds. This will remove all syncs to the Wii, allowing you to start from scratch to be able to perform the steps below.

    After maintaining the SYNC button on the Wii console supported for at least 15 seconds, you can "re-sync" your Wii Remotes:

    The first Wii Remote you want to sync, remove the lid of the battery compartment on the back of the remote control to find a small red button near the batteries.

    Press and release the small red button located near the batteries of the Wii Remote, LED lights on the front of the Wii Remote will blink.

    Press and quickly release the red SYNC button located under the white bands in front of the Wii console (picture).

    When the LED lights stop blinking and remain lit, the synchronization is complete. The LED remains lit indicates the player number (1 to 4).

    You must follow these procedures synchronization (steps "a" through "d" above) for each Wii Remote that you want to synchronize the system.

  4. #4
    Join Date
    Nov 2005
    Posts
    2,483

    Re: Wii Remote is not recognized by the Wii

    If you are still unable to reconnatre your Wiimotes with your Wii console after having followed the steps above, please call 1-800-255-3700 for assistance.

Similar Threads

  1. Remote disc is not getting recognized mac os x 10.4.11
    By desirer in forum Operating Systems
    Replies: 4
    Last Post: 18-02-2012, 07:11 PM
  2. Replies: 5
    Last Post: 19-04-2011, 10:37 PM
  3. Medion MD5000 - HDD Recognized in BIOS - Not Recognized after POST
    By Marjorie in forum Motherboard Processor & RAM
    Replies: 5
    Last Post: 28-08-2010, 06:04 AM
  4. Replies: 1
    Last Post: 22-03-2008, 06:40 AM
  5. Replies: 2
    Last Post: 11-12-2007, 03:26 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,718,906,729.31339 seconds with 17 queries