How to connect cosmos 1000 fans to power

[Ronchi]

My office's superiors has bought a Cosmos 1000 and i was given work to connect the fans of the system to power so that the fans should work as fast as it seemed they should. But i really have no idea of doing that. Its very urgent. Could anyone of you can guide me in connecting cosmos 1000 fans to power ?

[Rawko]

Make sure you have the molex connector. You will find two connectors on the fans that allows you to plug the molex connector into one fan from the power supply and to connect the remaining fan connector into your next fan.

Remember that "fan only" power supply connectors can only power 2 fans so you need to use both fan to only connectors rather than 'fan only'. Also make sure to do not hook all four fans up to one 'fan only connector'.

[Fabian]

You will find all 4 120mm fans when the case of Cosmos 1000 is opened. Out of which Two fans act as exhaust on the top of the case and one fan expels hot air out the back.With the fan only connectors you can NOT plug a drive in to them.

But the other connectors you can stop anything in to. You can set the fans in any molex switch and it will working. But remember that you should not plug a cd drive or a hard drive in one of the fan switch only because they don' t supply enough voltage.

[Ronchi]

Thanks buddy. It makes much sense for me. Let me try to connect the fans keeping these "fan only" in mind. I'll get back to if any thing goes wrong. Thanks for helping me