Results 1 to 7 of 7

Thread: Standby Problem - Shut down after Wakeup

  1. #1
    jje Guest

    Standby Problem - Shut down after Wakeup

    Hello,

    I am using Windows XP professional on an ASUS P5K Mainboard.
    I can use the Standby-Funktion (S3) without problems.
    BUT >
    After wakeup from Standby the System starts again but in 3 of 4 cases the
    system performs after about 15 sec. a shut down.

    What can I do?
    How can I see, which programm or device causes the shut down.

    kind regargs
    Joachim
    --
    jje

  2. #2
    Gerry Guest

    Re: Standby Problem - Shut down after Wakeup

    Joachim

    Are you get a blue screen of death?

    Please post copies of the Stop Error Reports.

    Disable automatic restart on system failure. This should help by
    allowing time to write down the STOP code properly. Right click on
    the My Computer icon on the Desktop and select Properties, Advanced,
    Start-Up and Recovery, System Failure and uncheck box before
    Automatically Restart.

    Do not re-enable automatic restart on system failure until you have
    resolved the problem. Check for variants of the Stop Error message.

    An alternative is to keep pressing the F8 key during Start-Up and select
    option - Disable automatic restart on system failure.

    If you are using a wireless keyboard and the F8 key does not work
    substitute a wired keyboard and mouse for this exercise only.


    --



    Hope this helps.

    Gerry
    ~~~~
    FCA
    Stourport, England
    Enquire, plan and execute
    ~~~~~~~~~~~~~~~~~~~


    jje wrote:
    > Hello,
    >
    > I am using Windows XP professional on an ASUS P5K Mainboard.
    > I can use the Standby-Funktion (S3) without problems.
    > BUT >
    > After wakeup from Standby the System starts again but in 3 of 4 cases
    > the system performs after about 15 sec. a shut down.
    >
    > What can I do?
    > How can I see, which programm or device causes the shut down.
    >
    > kind regargs
    > Joachim




  3. #3
    jje Guest

    Re: Standby Problem - Shut down after Wakeup

    Hello Gerry,

    thank you for your answer.

    The automatic restart is disabled and I get no blue screen or an other error
    message. The computer starts after wackup as expected, the screen shows the
    last used situation and all seems to be ok. But in 3 of 4 cases the computer
    performs a normal shut down afetr about 15 sec.. The screen comes up with the
    normal message that the computer will be shut down and the systems goes down
    as usual after a regular shut down.

    Is there a possibility to see in a logfile, which programm causes the shut
    down process?

    joachim
    --
    jje


    "Gerry" wrote:

    > Joachim
    >
    > Are you get a blue screen of death?
    >
    > Please post copies of the Stop Error Reports.
    >
    > Disable automatic restart on system failure. This should help by
    > allowing time to write down the STOP code properly. Right click on
    > the My Computer icon on the Desktop and select Properties, Advanced,
    > Start-Up and Recovery, System Failure and uncheck box before
    > Automatically Restart.
    >
    > Do not re-enable automatic restart on system failure until you have
    > resolved the problem. Check for variants of the Stop Error message.
    >
    > An alternative is to keep pressing the F8 key during Start-Up and select
    > option - Disable automatic restart on system failure.
    >
    > If you are using a wireless keyboard and the F8 key does not work
    > substitute a wired keyboard and mouse for this exercise only.
    >
    >
    > --
    >
    >
    >
    > Hope this helps.
    >
    > Gerry
    > ~~~~
    > FCA
    > Stourport, England
    > Enquire, plan and execute
    > ~~~~~~~~~~~~~~~~~~~
    >
    >
    > jje wrote:
    > > Hello,
    > >
    > > I am using Windows XP professional on an ASUS P5K Mainboard.
    > > I can use the Standby-Funktion (S3) without problems.
    > > BUT >
    > > After wakeup from Standby the System starts again but in 3 of 4 cases
    > > the system performs after about 15 sec. a shut down.
    > >
    > > What can I do?
    > > How can I see, which programm or device causes the shut down.
    > >
    > > kind regargs
    > > Joachim

    >
    >
    >


  4. #4
    Gerry Guest

    Re: Standby Problem - Shut down after Wakeup

    Does in anything appear on the System log of Event Viewer?

    You can access Event Viewer by selecting Start, Control Panel,
    Administrative Tools, and Event Viewer.

    A tip for posting copies of Error Reports! Run Event Viewer and double
    click on the error you want to copy. In the window, which appears is a
    button resembling two pages. Click the button and close Event
    Viewer.Now start your message (email) and do a paste into the body of
    the message. Make sure this is the first paste after exiting from
    Event Viewer.

    Otherwise see if anything here helps:
    http://aumha.org/win5/a/shtdwnxp.htm


    --



    Hope this helps.

    Gerry
    ~~~~
    FCA
    Stourport, England
    Enquire, plan and execute
    ~~~~~~~~~~~~~~~~~~~

    jje wrote:
    > Hello Gerry,
    >
    > thank you for your answer.
    >
    > The automatic restart is disabled and I get no blue screen or an
    > other error message. The computer starts after wackup as expected,
    > the screen shows the last used situation and all seems to be ok. But
    > in 3 of 4 cases the computer performs a normal shut down afetr about
    > 15 sec.. The screen comes up with the normal message that the
    > computer will be shut down and the systems goes down as usual after a
    > regular shut down.
    >
    > Is there a possibility to see in a logfile, which programm causes the
    > shut down process?
    >
    > joachim
    >
    >> Joachim
    >>
    >> Are you get a blue screen of death?
    >>
    >> Please post copies of the Stop Error Reports.
    >>
    >> Disable automatic restart on system failure. This should help by
    >> allowing time to write down the STOP code properly. Right click on
    >> the My Computer icon on the Desktop and select Properties, Advanced,
    >> Start-Up and Recovery, System Failure and uncheck box before
    >> Automatically Restart.
    >>
    >> Do not re-enable automatic restart on system failure until you have
    >> resolved the problem. Check for variants of the Stop Error message.
    >>
    >> An alternative is to keep pressing the F8 key during Start-Up and
    >> select option - Disable automatic restart on system failure.
    >>
    >> If you are using a wireless keyboard and the F8 key does not work
    >> substitute a wired keyboard and mouse for this exercise only.
    >>
    >>
    >> --
    >>
    >>
    >>
    >> Hope this helps.
    >>
    >> Gerry
    >> ~~~~
    >> FCA
    >> Stourport, England
    >> Enquire, plan and execute
    >> ~~~~~~~~~~~~~~~~~~~
    >>
    >>
    >> jje wrote:
    >>> Hello,
    >>>
    >>> I am using Windows XP professional on an ASUS P5K Mainboard.
    >>> I can use the Standby-Funktion (S3) without problems.
    >>> BUT >
    >>> After wakeup from Standby the System starts again but in 3 of 4
    >>> cases the system performs after about 15 sec. a shut down.
    >>>
    >>> What can I do?
    >>> How can I see, which programm or device causes the shut down.
    >>>
    >>> kind regargs
    >>> Joachim




  5. #5
    jje Guest

    Re: Standby Problem - Shut down after Wakeup

    Hello Gerry,

    I've tested, but there are no entries in the System log concerning this
    problem.

    I've also checked the hints in your link. For a short time I tought I've
    found a good hint, (Root-Hub > Properties > Energy-Admin) but after some
    Standby-Tests the problem was still there.

    The systems works very well exept this Standby problem.

    Do you have some new idees? Is there another logging tool, to see who
    ordered the shutdown process.

    Kind regards
    Joachim

    --
    jje


    "Gerry" wrote:

    > Does in anything appear on the System log of Event Viewer?
    >
    > You can access Event Viewer by selecting Start, Control Panel,
    > Administrative Tools, and Event Viewer.
    >
    > A tip for posting copies of Error Reports! Run Event Viewer and double
    > click on the error you want to copy. In the window, which appears is a
    > button resembling two pages. Click the button and close Event
    > Viewer.Now start your message (email) and do a paste into the body of
    > the message. Make sure this is the first paste after exiting from
    > Event Viewer.
    >
    > Otherwise see if anything here helps:
    > http://aumha.org/win5/a/shtdwnxp.htm
    >
    >
    > --
    >
    >
    >
    > Hope this helps.
    >
    > Gerry
    > ~~~~
    > FCA
    > Stourport, England
    > Enquire, plan and execute
    > ~~~~~~~~~~~~~~~~~~~
    >
    > jje wrote:
    > > Hello Gerry,
    > >
    > > thank you for your answer.
    > >
    > > The automatic restart is disabled and I get no blue screen or an
    > > other error message. The computer starts after wackup as expected,
    > > the screen shows the last used situation and all seems to be ok. But
    > > in 3 of 4 cases the computer performs a normal shut down afetr about
    > > 15 sec.. The screen comes up with the normal message that the
    > > computer will be shut down and the systems goes down as usual after a
    > > regular shut down.
    > >
    > > Is there a possibility to see in a logfile, which programm causes the
    > > shut down process?
    > >
    > > joachim
    > >
    > >> Joachim
    > >>
    > >> Are you get a blue screen of death?
    > >>
    > >> Please post copies of the Stop Error Reports.
    > >>
    > >> Disable automatic restart on system failure. This should help by
    > >> allowing time to write down the STOP code properly. Right click on
    > >> the My Computer icon on the Desktop and select Properties, Advanced,
    > >> Start-Up and Recovery, System Failure and uncheck box before
    > >> Automatically Restart.
    > >>
    > >> Do not re-enable automatic restart on system failure until you have
    > >> resolved the problem. Check for variants of the Stop Error message.
    > >>
    > >> An alternative is to keep pressing the F8 key during Start-Up and
    > >> select option - Disable automatic restart on system failure.
    > >>
    > >> If you are using a wireless keyboard and the F8 key does not work
    > >> substitute a wired keyboard and mouse for this exercise only.
    > >>
    > >>
    > >> --
    > >>
    > >>
    > >>
    > >> Hope this helps.
    > >>
    > >> Gerry
    > >> ~~~~
    > >> FCA
    > >> Stourport, England
    > >> Enquire, plan and execute
    > >> ~~~~~~~~~~~~~~~~~~~
    > >>
    > >>
    > >> jje wrote:
    > >>> Hello,
    > >>>
    > >>> I am using Windows XP professional on an ASUS P5K Mainboard.
    > >>> I can use the Standby-Funktion (S3) without problems.
    > >>> BUT >
    > >>> After wakeup from Standby the System starts again but in 3 of 4
    > >>> cases the system performs after about 15 sec. a shut down.
    > >>>
    > >>> What can I do?
    > >>> How can I see, which programm or device causes the shut down.
    > >>>
    > >>> kind regargs
    > >>> Joachim

    >
    >
    >


  6. #6
    Join Date
    Oct 2008
    Posts
    1
    Hi,

    I was wondering if this problem ever got resolved because I am experiencing exactly the same pattern of events as the OP.

    I put my PC (XP Home) into Standby and when I come to wake it it does so but, after a few seconds, it goes into the Shutdown procedure and closes everything down. This happens every time I use Standby. There are no blue screens, no error message or codes. It's very annoying.

    Since this was the only post I could find that addressed my problem directly I was hoping something had come to light since the thread started.

    I could really use your help.

    Thanks.

  7. #7
    Join Date
    Dec 2008
    Posts
    1

    Re: Standby Problem - Shut down after Wakeup

    Hey,
    I'm currently using ASUS P5B Motherboard and i'm having problems with the stand-by option. Whenever i put it into stand-by, it shuts down instead and when I press the power button on the tower, it doesn't open unless i switch off the power and turn it back on.

    Can anyone help me out? The problems getting on my nerves.

    Thanks

Similar Threads

  1. AOC e2043F monitor on standby mode problem
    By lodhnerist in forum Monitor & Video Cards
    Replies: 5
    Last Post: 20-08-2011, 12:52 PM
  2. Reconnect problem after Standby
    By Maal-Gaadi in forum Operating Systems
    Replies: 3
    Last Post: 23-12-2010, 07:27 PM
  3. Standby/Hibernate Problem - Cannot wake up
    By BUKSIS in forum Windows XP Support
    Replies: 6
    Last Post: 02-08-2010, 10:25 PM
  4. Windows Shut Down Problem
    By Daniel craig in forum Operating Systems
    Replies: 7
    Last Post: 23-03-2009, 11:58 AM
  5. Standby/hibernate problem
    By samit in forum Windows XP Support
    Replies: 3
    Last Post: 23-02-2008, 03:06 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,751,722,514.37961 seconds with 16 queries