STOP 0x0000007E 0xC0000005 after acquiring IP, network connection

We get a blue screen with STOP 0x0000007E 0xC0000005 (without a .sys
or filename) after connecting the network cable and acquiring an IP
address. I uninstalled the network drivers and updated the drivers to
a newer version. I tried netsh i i reset log.txt and deleting
tcpip.sys. We had virii and spyware and removed some with spybot. We
have iTunes.

This is on Windows XP Home SP2.

On Nov 12, 4:03 pm, recurr <rec...@gmail.com> wrote:
> We get a blue screen with STOP 0x0000007E 0xC0000005 (without a .sys
> or filename) after connecting the network cable and acquiring an IP
> address. I uninstalled the network drivers and updated the drivers to
> a newer version. I tried netsh i i reset log.txt and deleting
> tcpip.sys. We had virii and spyware and removed some with spybot. We
> have iTunes.

"recurr" wrote:

> We get a blue screen with STOP 0x0000007E 0xC0000005 (without a .sys
> or filename) after connecting the network cable and acquiring an IP
> address. I uninstalled the network drivers and updated the drivers to
> a newer version. I tried netsh i i reset log.txt and deleting
> tcpip.sys. We had virii and spyware and removed some with spybot. We
> have iTunes.


This always refer to a bad Hardware/driver installed.
Try the Last good known Configuration to log into the system, then open
Device manager and see if there is any malfunctioining Devices or conflict in
IRQ, also look in the Event Viewer for error message and post them back in
your next post.
Read this articles and see, but how did you get rid of the Contra?.

Open a run command and type in these commands to see if there is a conflict
in /among drivers :
pstat.exe click [OK]
dmpchck.exe click [OK]
What you get from running this commands?.

You receive a "serious error" or a "STOP: 0x0000007E" error message in
Windows XP
http://support.microsoft.com/?kbid=321637&sd=RMVP
"STOP 0x0000007E" error message after you upgrade to Windows XP
http://support.microsoft.com/kb/330182
HOW TO: View and Manage Event Logs in Event Viewer in Windows XP
http://support.microsoft.com/default...308427&sd=tech
You receive a "serious error" or a "STOP: 0x0000007E" error message in
Windows XP
http://support.microsoft.com/kb/321637
Error message in Windows XP Service Pack 2: "Stop 0x7E"
http://support.microsoft.com/kb/900485
Stop: 0x7E Error occurs in Kbdclass.sys when you try to shut down Windows XP
http://support.microsoft.com/kb/313050
Easy CD Creator 5.0 does not function in Windows XP
http://support.microsoft.com/kb/310628
How to perform a clean boot in Windows XP
http://support.microsoft.com/?id=310353
A description of the Safe Mode Boot options in Windows XP
http://support.microsoft.com/kb/315222/en-us

Try to use the Verifier.exe command to see which Drivers not Verified on
your system:
How to Use Driver Verifier to Troubleshoot Windows Drivers
http://support.microsoft.com/kb/244617/en-us

You may have a bad RAM try to test your RAM by running Memtest by
downloading this tool and unzip it and make a floppy or CD/DVD and run it on
Reboot.
http://www.memtest86.com/
You may need to reposition/reset the RAM sticks in their slots.
After that you could do a repair install, and then test.
http://www.michaelstevenstech.com/XPrepairinstall.htm

0x00000019
http://www.microsoft.com/communities...=en-us&m=1&p=1

"STOP 0x00000074 BAD_SYSTEM_CONFIG_INFO" Error Message When You Start Your
Computer
http://support.microsoft.com/kb/326679

You receive a "STOP: 0x00000073 CONFIG_LIST_FAILED" error message in Windows
2000 or in Windows XP

http://support.microsoft.com/kb/291808

Install of XP Pro fails with Stop 0x0000007E on Dimension 9100
http://forums.us.dell.com/supportfor...=164525&page=2

"STOP 0x0000007E" error message after you upgrade to Windows XP
http://support.microsoft.com/kb/330182

Stop 0x00000050 in Win32k.sys When Changing Keyboard Layout
http://support.microsoft.com/kb/252371
Damaged Font Causes STOP 0x00000050 Error Message in the Win32k.sys File in
Windows 2000
http://support.microsoft.com/kb/319965
The HaxDoor virus may cause a "STOP 0x00000050" or "STOP 0x0000008e" error
message
http://support.microsoft.com/kb/903251
Error Message: STOP 0x00000050 (0xffffffe0, 0x00000001, 0xf30da010,
0x00000000) PAGE_FAULT_IN_NONPAGED_AREA
http://support.microsoft.com/kb/817197
Easy CD Creator 5.0 does not function in Windows XP
http://support.microsoft.com/kb/310628
Use the command chkdsk /r with recovery console:
http://support.microsoft.com/kb/314058
http://support.microsoft.com/kb/326215
DMA Mode for ATA/ATAPI Devices in Windows XP
http://www.microsoft.com/whdc/device...e/IDE-DMA.mspx
How to enable 48-bit Logical Block Addressing support for ATAPI disk drives
in Windows XP
http://support.microsoft.com/kb/303013

Example on the error code:
http://support.microsoft.com/kb/174232
HTH.
nass
----
http://www.nasstec.co.uk

On Mon, 12 Nov 2007 13:04:06 -0800, recurr <recurr@gmail.com> wrote:

>This is on Windows XP Home SP2.
>
>On Nov 12, 4:03 pm, recurr <rec...@gmail.com> wrote:
>> We get a blue screen with STOP 0x0000007E 0xC0000005 (without a .sys
>> or filename) after connecting the network cable and acquiring an IP
>> address. I uninstalled the network drivers and updated the drivers to
>> a newer version. I tried netsh i i reset log.txt and deleting
>> tcpip.sys. We had virii and spyware and removed some with spybot. We
>> have iTunes.
>

You only removed *some* ?

This turned out to be a virus that tries to use the network
connection.

On Nov 12, 4:03*pm, recurr <rec...@gmail.com> wrote:
> We get a blue screen with STOP 0x0000007E 0xC0000005 (without a .sys
> or filename) after connecting the network cable and acquiring an IP
> address. I uninstalled the network drivers and updated the drivers to
> a newer version. I tried netsh i i reset log.txt and deleting
> tcpip.sys. We had virii and spyware and removed some with spybot. We
> have iTunes.