Results 1 to 4 of 4

Thread: usb2 hardware but no usb2 function

  1. #1
    Join Date
    Aug 2005
    Posts
    257

    usb2 hardware but no usb2 function

    I am having an AMD machine with a VIA chipset kt600-8237. I had successfully installed the Via Enhanced Host Controller driver and on the device manager I am getting the following:

    Driver USB 2.0 Root Hub 5.1.2600.0
    Sub Drivers usbhub.sys 5.1.2600.2180

    Driver USB Root Hub 5.1.2600.2180
    Sub Drivers usbd.sys 5.1.2600.0
    Sub Drivers usbhub.sys 5.1.2600.2180
    Sub Drivers vulfntr.sys 2.52

    Driver Via USB Enhanced Host Controller 5.1.2600.1106
    Sub Drivers usbehci.sys 5.1.2600.2180
    Sub Drivers usbhub.sys 5.1.2600.2180
    Sub Drivers usbport.sys 5.1.2600.2180
    Sub Drivers hccoin.dll 5.1.2600.2180
    Sub Drivers usbui.dll 5.1.2600.2180

    Driver Via Rev 5 or later USB Universal Host Controller 5.1.2600.2180
    Sub Drivers usbhub.sys 5.1.2600.2180
    Sub Drivers usbport.sys 5.1.2600.2180
    Sub Drivers usbuhci.sys 5.1.2600.2180
    Sub Drivers usbui.dll 5.1.2600.2180

    I am a little confused about the usbd.sys driver that is being an older version. Also, the usb 2.0 root hub is listed as NEC. I think that it was the original usb 2.0 driver but it does not seem right. The online update does work in 1.1 mode but not with usb 2.0 mode? Any ideas?

  2. #2
    Join Date
    May 2006
    Posts
    2,812

    Re: usb2 hardware but no usb2 function

    Have you read everything and installed the suggested drivers, if yes, then there isnt much left for anyone to provide you better assitance. You can however try to check in the bios to see if the usb settings are enabled. Also, by using a tool to check and or test the connections. You can also try to run msinfo32 and look for conflicts or try a benchmarking tool like pcwizard.

  3. #3
    Join Date
    Aug 2005
    Posts
    257

    Re: usb2 hardware but no usb2 function

    Thank you, I checked that the Bios setting has been set for usb 2 already. I then used the msinfo and found no conflicts as well. I also downloaded the pcwizard and used it to look for issues, but nothing was found. Any other suggestions.

  4. #4
    Join Date
    May 2006
    Posts
    2,335

    Re: usb2 hardware but no usb2 function

    Did you also checked if the plug and play service is enabled. Check the below link for more information.

    http://support.microsoft.com/kb/822603

Similar Threads

  1. Compatibility of LinkStick USB2.0 with a NetGear G class router
    By Faiyaz9 in forum Networking & Security
    Replies: 4
    Last Post: 19-08-2011, 10:36 PM
  2. Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC
    By !Destroyer! in forum Hardware Peripherals
    Replies: 5
    Last Post: 11-12-2010, 07:19 PM
  3. Usb2 benchmarks
    By Aditix360 in forum Windows Software
    Replies: 3
    Last Post: 11-08-2009, 11:29 AM
  4. Leadtek WinFast DTV Dongle USB2 Driver - uninstall driver
    By Tobius in forum Windows Software
    Replies: 2
    Last Post: 23-02-2009, 01:21 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,711,666,823.15645 seconds with 17 queries