Results 1 to 7 of 7

Thread: chkdsk /r prompts for full path for Autochk.exe? novice user

  1. #1
    peterkeesen Guest

    chkdsk /r prompts for full path for Autochk.exe? novice user

    I am a novice user.

    When i type chkdsk /r i am prompted to "type the full path including drive
    letter for location of Autochk.exe"

    Problem: I have no idea what the path is or how to tell where it is. I
    would assume it is on one of the 6 floppy setup disks I just used or on
    drive C somewhere, but I do not have access to windows to search for it.


    Background Summary:
    Had power outage. Blue Screened.
    unmountable_boot_volume
    stop: 0x000000ED (0x81BD6E30, 0xc0000032, 0x00000000, 0x00000000).
    Had no access to safemode, a setup CD, or recovery console.
    Using HP Pavilion OEM version of XP.

    Downloaded the XP setup boot to 6 floppy disks per
    http://support.microsoft.com/kb/308402/EN-US#kb1 in order to access Recovery
    Console and be able to use chkdsk command per
    http://support.microsoft.com/default...;EN-US;q297185.

    I inserted all 6 floppy disks then selected 'r' for repair.
    at the prompt i typed "chkdsk /r".

    the prompt is from drive C

    do i need to switch to drive a or would that only perform the repair on
    drive a?

    thanks for reading




  2. #2
    peterkeesen or balfiecat Guest

    RE: chkdsk /r can't find Autochk.exe

    Apparently chkdsk cannot find Autochk.exe from what I read at "How To Use
    Recovery Console" at
    http://support.microsoft.com/default...n-us;307654#3:

    "Chkdsk: The /p switch runs Chkdsk even if the drive is not flagged as
    dirty. The /r switch locates bad sectors and recovers readable information.
    This switch implies /p. Chkdsk requires Autochk. Chkdsk automatically looks
    for Autochk.exe in the startup folder. If Chkdsk cannot find the file in the
    startup folder, it looks for the Windows 2000 Setup CD-ROM. If Chkdsk cannot
    find the installation CD-ROM, Chkdsk prompts the user for the location of
    Autochk.exe."

    Still, I do not know what to do. I do not have a setup CD; just the floppies.

    *Should I reinsert each of the floppy disks and see if it searches them for
    the file? *Can I download the autochk.exe file for XP somewhere? Then I could
    insert the floppy at the prompt and tell it to look on drive 'A', correct?

    I made the floppy disks on a compaq using Wiin ME but do not have consistent
    access to that pc (it is not mine). I have papers to write for school and am
    getting pretty anxious (have been trying to fix all weekend).

    Thanks in advance for your help :-)


    "peterkeesen" wrote:

    > I am a novice user.
    >
    > When i type chkdsk /r i am prompted to "type the full path including drive
    > letter for location of Autochk.exe"
    >
    > Problem: I have no idea what the path is or how to tell where it is. I
    > would assume it is on one of the 6 floppy setup disks I just used or on
    > drive C somewhere, but I do not have access to windows to search for it.
    >
    >
    > Background Summary:
    > Had power outage. Blue Screened.
    > unmountable_boot_volume
    > stop: 0x000000ED (0x81BD6E30, 0xc0000032, 0x00000000, 0x00000000).
    > Had no access to safemode, a setup CD, or recovery console.
    > Using HP Pavilion OEM version of XP.
    >
    > Downloaded the XP setup boot to 6 floppy disks per
    > http://support.microsoft.com/kb/308402/EN-US#kb1 in order to access Recovery
    > Console and be able to use chkdsk command per
    > http://support.microsoft.com/default...;EN-US;q297185.
    >
    > I inserted all 6 floppy disks then selected 'r' for repair.
    > at the prompt i typed "chkdsk /r".
    >
    > the prompt is from drive C
    >
    > do i need to switch to drive a or would that only perform the repair on
    > drive a?
    >
    > thanks for reading
    >
    >
    >


  3. #3
    Treeman Guest

    Re: chkdsk /r prompts for full path for Autochk.exe? novice user


    peterkeesen Wrote:
    > I am a novice user.
    >
    > When i type chkdsk /r i am prompted to "type the full path including
    > drive
    > letter for location of Autochk.exe"
    >
    > Problem: I have no idea what the path is or how to tell where it is.
    > I
    > would assume it is on one of the 6 floppy setup disks I just used or
    > on
    > drive C somewhere, but I do not have access to windows to search for
    > it.
    >
    >
    > Background Summary:
    > Had power outage. Blue Screened.
    > unmountable_boot_volume
    > stop: 0x000000ED (0x81BD6E30, 0xc0000032, 0x00000000, 0x00000000).
    > Had no access to safemode, a setup CD, or recovery console.
    > Using HP Pavilion OEM version of XP.
    >
    > Downloaded the XP setup boot to 6 floppy disks per
    > http://support.microsoft.com/kb/308402/EN-US#kb1 in order to access
    > Recovery
    > Console and be able to use chkdsk command per
    > http://tinyurl.com/cwk5.
    >
    > I inserted all 6 floppy disks then selected 'r' for repair.
    > at the prompt i typed "chkdsk /r".
    >
    > the prompt is from drive C
    >
    > do i need to switch to drive a or would that only perform the repair
    > on
    > drive a?
    >
    > thanks for reading


    The problem is not that your computer can't find autochk.exe -- the
    problem is that it cannot find the system partition itself and
    therefore cannot traverse the directory path to find autochk.exe. This
    is exactly what happens if the partition is flagged as invisible (ie:
    "hidden NTFS"). This happens on most computers like Dell, Compaq, HP,
    etc, where there is a hidden partition that contains system files.
    Check out HP help center, or use a third party app. like Partition
    Magic 8, tools that let's you "see," the hidden partition.
    Then you can do your "chkdsk /r."
    Treeman


    --
    Treeman

  4. #4
    peterkeesen or balfiecat Guest

    RE: chkdsk /r can't find Autochk.exe

    to complicate things more, when i try to get any directory information from
    C: i get nothing, but dir a: gives me a list of files. does this mean my
    windows files on C are gone? the prompt is coming from C: .

    i started to used fixboot but i do not understand partitions and apparently
    using the command creates the boot files on a petition and i changed my miond
    and told it not to continue because other users with the same problem i have
    had problems after using the fixboot command.

    there is a possibility that after a previous recovery i failed to redo my
    windows updates and did not have service pack 1 installed. hewlett packard
    has a warning on their site that if you do not have sp1 installed you might
    get the unmountable boot volume error if there is a sudden slow down in
    writing to disk speed *which there would be in power outage) ... something
    about cashing .... they say they have some file they will mail to you on a
    disk to fix it (for money i really don't have) but i need access to my pc
    like soon for school! this is my final quarter of high school and i cant
    afford to blow it or i dont graduate!

    i have seen numerous posts on various sites from other people with the exact
    same problem (unmountable boot volume, use 6 floppy disks to access recovery,
    don't have xp cd, unable to use chkdsk due to autochk.exe not found), but no
    final solution anywhere that i have read.


    i so hope someone here can tell me how to fix this .


    "peterkeesen or balfiecat" wrote:

    > Apparently chkdsk cannot find Autochk.exe from what I read at "How To Use
    > Recovery Console" at
    > http://support.microsoft.com/default...n-us;307654#3:
    > If Chkdsk cannot > find the installation CD-ROM, Chkdsk prompts the user for the location of > Autochk.exe."
    >
    > Still, I do not know what to do. I do not have a setup CD; just the floppies.
    >


  5. #5
    peterkeesen or balfiecat Guest

    Re: chkdsk /r prompts for full path for Autochk.exe? novice user

    thanks treeman,

    i had read about the partitions at microsoft and HP (and in here actually),
    but I do not have access to anything like the partition utility and i live 3
    hours from the nearest store (anchorage). It makes sense to me now (that the
    partition was hidden) and there is also a drive D preinstalled that i have
    never known how to access, but i did not read anything that i thought i could
    do to unhide it myself so this morning i went ahead and just restarted and
    selected the recovery that comes preinstalled. it takes it back to
    manufacturer settings so i knew i would lose everything (soooooooo much music
    and some school stuff too), but i figure rewriting some stuff is faster than
    getting a card to charge a mail order cd then waiting for it to get shipped
    to the middle of no where alaska.

    i will spend some time learning about partitions and maybe one of my friends
    parents even have software for it. something i did not understand was that i
    thought this happened because of the power outage, but i have what i thought
    was a good surge protector, not just a glorified power strip.

    anyway, thanks again for clarifying what the issue really was.

    "Treeman" wrote:

    >
    > peterkeesen Wrote:
    > > I am a novice user.
    > >
    > > When i type chkdsk /r i am prompted to "type the full path including
    > > drive
    > > letter for location of Autochk.exe"
    > >
    > > Problem: I have no idea what the path is or how to tell where it is.
    > > I
    > > would assume it is on one of the 6 floppy setup disks I just used or
    > > on
    > > drive C somewhere, but I do not have access to windows to search for
    > > it.
    > >
    > >
    > > Background Summary:
    > > Had power outage. Blue Screened.
    > > unmountable_boot_volume
    > > stop: 0x000000ED (0x81BD6E30, 0xc0000032, 0x00000000, 0x00000000).
    > > Had no access to safemode, a setup CD, or recovery console.
    > > Using HP Pavilion OEM version of XP.
    > >
    > > Downloaded the XP setup boot to 6 floppy disks per
    > > http://support.microsoft.com/kb/308402/EN-US#kb1 in order to access
    > > Recovery
    > > Console and be able to use chkdsk command per
    > > http://tinyurl.com/cwk5.
    > >
    > > I inserted all 6 floppy disks then selected 'r' for repair.
    > > at the prompt i typed "chkdsk /r".
    > >
    > > the prompt is from drive C
    > >
    > > do i need to switch to drive a or would that only perform the repair
    > > on
    > > drive a?
    > >
    > > thanks for reading

    >
    > The problem is not that your computer can't find autochk.exe -- the
    > problem is that it cannot find the system partition itself and
    > therefore cannot traverse the directory path to find autochk.exe. This
    > is exactly what happens if the partition is flagged as invisible (ie:
    > "hidden NTFS"). This happens on most computers like Dell, Compaq, HP,
    > etc, where there is a hidden partition that contains system files.
    > Check out HP help center, or use a third party app. like Partition
    > Magic 8, tools that let's you "see," the hidden partition.
    > Then you can do your "chkdsk /r."
    > Treeman
    >
    >
    > --
    > Treeman
    >


  6. #6
    peterkeesen or balfiecat Guest

    REPOST: Re: chkdsk /r prompts for full path for Autochk.exe? novice user

    thanks treeman,

    i had read about the partitions at microsoft and HP (and in here actually),
    but I do not have access to anything like the partition utility and i live 3
    hours from the nearest store (anchorage). It makes sense to me now (that the
    partition was hidden) and there is also a drive D preinstalled that i have
    never known how to access, but i did not read anything that i thought i could
    do to unhide it myself so this morning i went ahead and just restarted and
    selected the recovery that comes preinstalled. it takes it back to
    manufacturer settings so i knew i would lose everything (soooooooo much music
    and some school stuff too), but i figure rewriting some stuff is faster than
    getting a card to charge a mail order cd then waiting for it to get shipped
    to the middle of no where alaska.

    i will spend some time learning about partitions and maybe one of my friends
    parents even have software for it. something i did not understand was that i
    thought this happened because of the power outage, but i have what i thought
    was a good surge protector, not just a glorified power strip.

    anyway, thanks again for clarifying what the issue really was.

    "Treeman" wrote:

    >
    > peterkeesen Wrote:
    > > I am a novice user.
    > >
    > > When i type chkdsk /r i am prompted to "type the full path including
    > > drive
    > > letter for location of Autochk.exe"
    > >
    > > Problem: I have no idea what the path is or how to tell where it is.
    > > I
    > > would assume it is on one of the 6 floppy setup disks I just used or
    > > on
    > > drive C somewhere, but I do not have access to windows to search for
    > > it.
    > >
    > >
    > > Background Summary:
    > > Had power outage. Blue Screened.
    > > unmountable_boot_volume
    > > stop: 0x000000ED (0x81BD6E30, 0xc0000032, 0x00000000, 0x00000000).
    > > Had no access to safemode, a setup CD, or recovery console.
    > > Using HP Pavilion OEM version of XP.
    > >
    > > Downloaded the XP setup boot to 6 floppy disks per
    > > http://support.microsoft.com/kb/308402/EN-US#kb1 in order to access
    > > Recovery
    > > Console and be able to use chkdsk command per
    > > http://tinyurl.com/cwk5.
    > >
    > > I inserted all 6 floppy disks then selected 'r' for repair.
    > > at the prompt i typed "chkdsk /r".
    > >
    > > the prompt is from drive C
    > >
    > > do i need to switch to drive a or would that only perform the repair
    > > on
    > > drive a?
    > >
    > > thanks for reading

    >
    > The problem is not that your computer can't find autochk.exe -- the
    > problem is that it cannot find the system partition itself and
    > therefore cannot traverse the directory path to find autochk.exe. This
    > is exactly what happens if the partition is flagged as invisible (ie:
    > "hidden NTFS"). This happens on most computers like Dell, Compaq, HP,
    > etc, where there is a hidden partition that contains system files.
    > Check out HP help center, or use a third party app. like Partition
    > Magic 8, tools that let's you "see," the hidden partition.
    > Then you can do your "chkdsk /r."
    > Treeman
    >
    >
    > --
    > Treeman
    >


  7. #7
    Treeman Guest

    REPOST: Re: chkdsk /r prompts for full path for Autochk.exe? novice user


    peterkeesen Wrote:
    > I am a novice user.
    >
    > When i type chkdsk /r i am prompted to "type the full path including
    > drive
    > letter for location of Autochk.exe"
    >
    > Problem: I have no idea what the path is or how to tell where it is.
    > I
    > would assume it is on one of the 6 floppy setup disks I just used or
    > on
    > drive C somewhere, but I do not have access to windows to search for
    > it.
    >
    >
    > Background Summary:
    > Had power outage. Blue Screened.
    > unmountable_boot_volume
    > stop: 0x000000ED (0x81BD6E30, 0xc0000032, 0x00000000, 0x00000000).
    > Had no access to safemode, a setup CD, or recovery console.
    > Using HP Pavilion OEM version of XP.
    >
    > Downloaded the XP setup boot to 6 floppy disks per
    > http://support.microsoft.com/kb/308402/EN-US#kb1 in order to access
    > Recovery
    > Console and be able to use chkdsk command per
    > http://tinyurl.com/cwk5.
    >
    > I inserted all 6 floppy disks then selected 'r' for repair.
    > at the prompt i typed "chkdsk /r".
    >
    > the prompt is from drive C
    >
    > do i need to switch to drive a or would that only perform the repair
    > on
    > drive a?
    >
    > thanks for reading


    The problem is not that your computer can't find autochk.exe -- the
    problem is that it cannot find the system partition itself and
    therefore cannot traverse the directory path to find autochk.exe. This
    is exactly what happens if the partition is flagged as invisible (ie:
    "hidden NTFS"). This happens on most computers like Dell, Compaq, HP,
    etc, where there is a hidden partition that contains system files.
    Check out HP help center, or use a third party app. like Partition
    Magic 8, tools that let's you "see," the hidden partition.
    Then you can do your "chkdsk /r."
    Treeman


    --
    Treeman

Similar Threads

  1. How to see full file path in Microsoft Excel 2003
    By Eas!war in forum MS Office Support
    Replies: 2
    Last Post: 21-01-2012, 01:15 PM
  2. How to get the full path in directory listing
    By Ilampirai in forum Operating Systems
    Replies: 5
    Last Post: 13-04-2011, 10:25 AM
  3. Replies: 4
    Last Post: 23-02-2010, 03:09 AM
  4. chkdsk cannot find autochk.exe in recovery console
    By Billie in forum Windows XP Support
    Replies: 1
    Last Post: 14-01-2009, 08:47 AM
  5. CHKDSK and Autochk.exe File Question?
    By RJ in forum Vista Help
    Replies: 3
    Last Post: 26-06-2007, 07:31 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •