blue screen of death

i have just built a new pc, with a amd 64 fx 55 cpu, 1 gig of ram, and a
gforce 6800 ultra graphix card. when i play games after about 30-60 mins
(varies) my computer crashes and blue screens

with error code

Error code 1000007e, parameter1 c0000005, parameter2 efca5972, parameter3
b913fb60, parameter4 b913f85c Error code 1000007e.

its all up to date with all the drivers and its all new stuff whats wrong
and how do i stop it.

First problem was “Missing or corrupt.....hal.dll”, fixed with help from you
guys & gals, thanks. Second problem “Missing or corrupt.....ntfs.sys”, as
above.

Now windows will "start" to start (you know what I mean :) ) and I get the
infamous Blue screen, the error is: STOP 0x00000071 {0x0000000, 0x00000000,
0x0000000, 0x00000000} SESSION5_INITIALIZATION_FAILED.

I have tried several times to start windows in Safe Mode with no luck, a
whole lot of commands (or something to that effect) come up on the screen
(which I’m assuming is normal) it stops on “system32/drivers/agp.440.sys”
then after a while the blue screen comes up, does that mean anything or is it
just normal for Safe Mode? Should other files come up?

I’m using XP Home, SP2, OEM (Dell) CD.

I'm looking at this article: http://support.microsoft.com/kb/887359/en-us

Question 1: Do I change “Winnt” to “windows” and does “$ntuninstallq811493$”
have a different name in XP Home? Would trying $xpuninstallq811493$ damage my
computer?

Question 2: Would copying the ntoskrnl from my CD be a good idea?

“If problems continue, disable or remove any newly installed hardware or
software. Disable BIOS memory options such as caching or shadowing.”

Question 3: Could this be fixed by accessing my current BIOs or up-dating
them? Can that be done through the Recovery Console?

Question 4: Is there any other possible changes that may need to be made to
the procedure in article 887359 to get it to work with XP, any suggestions
would be greatly appreciated, I’ll do anything to get my data back, well
almost.

When windows starts to load the moving light was blue before this happen,
but it's now lime-green (top right windows icon colour). I did notice back
when SP2 came out and I downloaded & installed it that the moving light went
from red or may yellow to blue.

Question: Could a possible solution be to install the Service pack(s) again,
is that possible through the Recovery Console?

Mount your disc in another NT type computer (or use a Bart PE or Linux
live disc) and salvage your files. Then format that mess that you have
and reinstall Windows. Format the disc NTFS right from the begining,
don't use FAT32 & convert.exe.

Thanks for that I'll get a Linux live disc off a work mate and I'll format my
HDD as NTFS. I was think of doing a Repair Install, but what I've read having
a OEM copy of win XP will mean I'll loose most or all of my data.

So I send an E-mail to Microsoft hoping they will resolve my problem. Instead
of helping me, they redirect me to the forums. So i need help guys :D!

I have recently gotten two different blue screens sayin this.


***Stop : 0x0000008E (0xC0000005, 0xBF802291, 0xB038CC74 , 0x00000000)
***Win32k.sys - Address BF802291 base at BF800000, DateStamp 45F013F6

***Stop : 0x0000008E (0xC0000005, 0xBFC3F3C0, 0xB04229B4 , 0x00000000)
***nv4-disp.dll - Address BFC3F3C0 base at BF9D5000, DateStamp 44DD4897

Nick

Have you added RAM memory recently?

How many memory sticks are installed?

I have not added memory recently, but I have noticed something at startup
when i turn off quick boot.

It says

Memory Testing: 2096128K OK (Installed Memory:2097152K)

Am I having a memory failure?

Oh yes and I have 2GB of memory in 2 sticks

Nick

I have noticed a number of reports in Google involving Stop Error
messages having the same characteristics as yours and no certain
solutions. The common charactistics Stop : 0x0000008E (0xC0000005, the
second parameter matching the address of Win32k.sys and the naming of
Win32k.sys. A lot of suspicion has been directed at memory and some
have suspected graphics cards. I found a further dialog considering dual
core processors. Since late last week I have encountered several users
with this error. Many Stop errors are caused by a problematic driver but
this does not seem to be the case with this error.

You might try removing one memory stick and seeing if the error still
occurs and then swapping it for the other and repeating the process.

You might test your RAM memory
http://www.memtest.org/

http://www.elephantboycomputers.com/...ardware_Tshoot

Ok I have a question about that Memtest program. Is it possible to run it
without a floppy drive? Because i Dont have one installed at the current
moment.

And also I have a new blue screen of death appearing
***Stop : 0x0000007e (0xC0000005, 0xBA177AFE, 0BAD03988, 0xBAD03684)
***USBPORT.SYS - Address BA177AFE base at BA170000, DateStamp 41107D62

Memory sticks are irrelivant. You nVidia driver is messed up. Uninstall the
driver and reinstall it from the nVidia website. That should solve the
problem. And microsoft wont be too much help, you may want to talk to the
computer manufacturer, they should be able to remotely fix it themselves.
But the problem is with the nVidia video program, not your memory.

Hi,

When i move a folder from a directory to an other i always receive the BSOD!!!
The pc boots and print out this message:
..\Mini053008-01.dmp
..\sysdata.xml

How can i retrieve the error's source?Any idea?

Thanks a lot

Ciao,

quando sposto completamente una cartella da una directory ad un altra ricevo
un BSOD
Il pc si riavvia, stampando successivamente a video il seguente errore di
notifica
..\Mini053008-01.dmp
..\sysdata.xml
Come posso trovare l'origine dello errore?

Grazie a tutti

Please post a copy of the Stop Error Report.

Disable automatic restart on system failure. This should help by
allowing time to write down the STOP code properly. Right click on
the My Computer icon on the Desktop and select Properties, Advanced,
Start-Up and Recovery, System Failure and uncheck box before
Automatically Restart.

Do not re-enable automatic restart on system failure until you have
resolved the problem. Check for variants of the Stop Error message.

[gutzplays]

hi sumone plz help me.....

im getting a blue screen for every 10minutes and the system gets restarted....

can sumone help me....
here is the error msg:

STOP:0x0000000A(0X54635010,0X00000002,0X00000001,0X805170EC)

hence is says physical memory dump......


Here is my dump log...
http://www.savefiles.net/d/r8g2bmj6gqp3.html

plz help me and mail to gutzplays@gmail.com as to what i should do....

thankx in advance....

[gutzplays]

----- 32 bit Kernel Mini Dump Analysis

DUMP_HEADER32:
MajorVersion 0000000f
MinorVersion 00000a28
DirectoryTableBase 00320000
PfnDataBase 81086000
PsLoadedModuleList 8055c720
PsActiveProcessHead 80562838
MachineImageType 0000014c
NumberProcessors 00000002
BugCheckCode 1000007f
BugCheckParameter1 00000008
BugCheckParameter2 bab48d70
BugCheckParameter3 00000000
BugCheckParameter4 00000000
PaeEnabled 00000001
KdDebuggerDataBlock 8054c2e0
MiniDumpFields 00000dff

TRIAGE_DUMP32:
ServicePackBuild 00000200
SizeOfDump 00010000
ValidOffset 0000fffc
ContextOffset 00000320
ExceptionOffset 000007d0
MmOffset 00001068
UnloadedDriversOffset 000010a0
PrcbOffset 00001878
ProcessOffset 000024c8
ThreadOffset 00002728
CallStackOffset 00002980
SizeOfCallStack 00003000
DriverListOffset 00005c10
DriverCount 00000076
StringPoolOffset 00007f18
StringPoolSize 00001010
BrokenDriverOffset 00000000
TriageOptions 00000041
TopOfStack b34b3000
DebuggerDataOffset 00005980
DebuggerDataSize 00000290
DataBlocksOffset 00008f28
DataBlocksCount 00000001


Windows XP Kernel Version 2600 (Service Pack 2) MP (2 procs) Free x86 compatible

Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055c720
Debug session time: Sat May 31 01:44:47 2008
System Uptime: 0 days 0:37:44
start end module name
804d7000 806e2000 nt Checksum: 001EFD4E Timestamp: Thu Jul 19 16:
10:40 2007 (469F3FA8)

Unloaded modules:
baf21000 baf22000 drmkaud.sys Timestamp: unavailable (00000000)
b9d05000 b9d12000 DMusic.sys Timestamp: unavailable (00000000)
b497e000 b49a1000 aec.sys Timestamp: unavailable (00000000)
b4ade000 b4aec000 swmidi.sys Timestamp: unavailable (00000000)
bae6e000 bae70000 splitter.sys Timestamp: unavailable (00000000)
bac50000 bac55000 Cdaudio.SYS Timestamp: unavailable (00000000)
b9e47000 b9e4a000 Sfloppy.SYS Timestamp: unavailable (00000000)
bac48000 bac4d000 Flpydisk.SYS Timestamp: unavailable (00000000)

Finished dump check