This device cannot start. (Code 10)

I just upgraded my motherboard and processor, I am running a NVIDIA FX5200
card. In the device manager I am getting a code 10 on the "nvidia WDM video
capture (universal)". I have updated all my drivers but I still get this code
10 message. I have uninstalled and reinstalled it many times but still
nothing. What am I doing wrong? Thanks for any help you can give.

Code 10
If the device has a FailReasonString value in its hardware key, that string
appears as the error message. The driver or enumerator puts this registry
string value there. If there is no FailReasonString in the hardware key, you
receive the following error message:

This device is either not present, not working properly, or does
not have all the drivers installed. (Code 10)

Try upgrading the device drivers for this device.

Solution button: Update Driver

To resolve this error code, make sure that the device is connected to the
computer correctly. For example, make sure that all cables are plugged in
and that all adapter cards are properly seated. Update the device driver as
the Resolution button suggests. You may also be able to remove the device
and redetect it by using the Add New Hardware wizard.

Explanation of error codes generated by Device Manager
http://support.microsoft.com/default...b;en-us;310123

--
Hope this helps. Let us know.
Wes

In news:B443FDBA-44D4-47C6-97B5-A91D89FEEFD3@microsoft.com,
Dragnet <Dragnet@discussions.microsoft.com> hunted and pecked:
> I just upgraded my motherboard and processor, I am running a NVIDIA
> FX5200 card. In the device manager I am getting a code 10 on the
> "nvidia WDM video capture (universal)". I have updated all my drivers
> but I still get this code 10 message. I have uninstalled and
> reinstalled it many times but still nothing. What am I doing wrong?
> Thanks for any help you can give.

i have exactly the same prob...even the same vid card...with the same results
after uninstall/reinstall, tried new drivers/old...i'm getting frustrated
!...this all came about after sp2...coincidence?...any advice would be
graetly appreciated.
Onida

"Wesley Vogel" wrote:

> Code 10
> If the device has a FailReasonString value in its hardware key, that string
> appears as the error message. The driver or enumerator puts this registry
> string value there. If there is no FailReasonString in the hardware key, you
> receive the following error message:
>
> This device is either not present, not working properly, or does
> not have all the drivers installed. (Code 10)
>
> Try upgrading the device drivers for this device.
>
> Solution button: Update Driver
>
> To resolve this error code, make sure that the device is connected to the
> computer correctly. For example, make sure that all cables are plugged in
> and that all adapter cards are properly seated. Update the device driver as
> the Resolution button suggests. You may also be able to remove the device
> and redetect it by using the Add New Hardware wizard.
>
> Explanation of error codes generated by Device Manager
> http://support.microsoft.com/default...b;en-us;310123
>
> --
> Hope this helps. Let us know.
> Wes
>
> In news:B443FDBA-44D4-47C6-97B5-A91D89FEEFD3@microsoft.com,
> Dragnet <Dragnet@discussions.microsoft.com> hunted and pecked:
> > I just upgraded my motherboard and processor, I am running a NVIDIA
> > FX5200 card. In the device manager I am getting a code 10 on the
> > "nvidia WDM video capture (universal)". I have updated all my drivers
> > but I still get this code 10 message. I have uninstalled and
> > reinstalled it many times but still nothing. What am I doing wrong?
> > Thanks for any help you can give.
>
>