Where to download dotnet 3.0 SP1 full package ?

Hello.

We have some secured PCs that are not connected to the internet. I
have downloaded the dotnetfx 3.0 and installed in these PCs quite some
time ago, and am thinking of downloading the dotnetfx 3.0 Service Pack
1 (SP1) to update those machines.

Unfortunately, all that I can get is that "dotnetfx30sp1setup.exe"
file that requires PCs to be connected to the internet to get the SP1.

Is there a full package of dotnetfx 3.0 SP1 available for download?

Thank you all !

Hari Hari Mau wrote:
> Hello.
>
> We have some secured PCs that are not connected to the internet. I
> have downloaded the dotnetfx 3.0 and installed in these PCs quite some
> time ago, and am thinking of downloading the dotnetfx 3.0 Service Pack
> 1 (SP1) to update those machines.
>
> Unfortunately, all that I can get is that "dotnetfx30sp1setup.exe"
> file that requires PCs to be connected to the internet to get the SP1.
>
> Is there a full package of dotnetfx 3.0 SP1 available for download?
>
> Thank you all !
This what you looking for?

http://www.microsoft.com/downloads/d...displaylang=en

Took less than 10 seconds to find via Google.

Results 1 - 10 of about 376,000 for dotnet 3.0 SP1. (0.12 seconds)

Desk Rabbit wrote:
> Hari Hari Mau wrote:
>> Hello.
>>
>> We have some secured PCs that are not connected to the internet. I
>> have downloaded the dotnetfx 3.0 and installed in these PCs quite
>> some time ago, and am thinking of downloading the dotnetfx 3.0
>> Service Pack 1 (SP1) to update those machines.
>>
>> Unfortunately, all that I can get is that "dotnetfx30sp1setup.exe"
>> file that requires PCs to be connected to the internet to get the
>> SP1. Is there a full package of dotnetfx 3.0 SP1 available for download?
>>
>> Thank you all !
> This what you looking for?
>
> http://www.microsoft.com/downloads/d...displaylang=en
>
> Took less than 10 seconds to find via Google.
>
> Results 1 - 10 of about 376,000 for dotnet 3.0 SP1. (0.12 seconds)

It would have takes even less time if the OP had just gone to microsoft.com
where it was developed.

On Aug 15, 7:29*pm, Desk Rabbit <nos...@example.com> wrote:
> Hari Hari Mau wrote:
> > Hello.
>
> > We have some secured PCs that are not connected to the internet. I
> > have downloaded the dotnetfx 3.0 and installed in these PCs quite some
> > time ago, and am thinking of downloading the dotnetfx 3.0 Service Pack
> > 1 (SP1) to update those machines.
>
> > Unfortunately, all that I can get is that "dotnetfx30sp1setup.exe"
> > file that requires PCs to be connected to the internet to get the SP1.
>
> > Is there a full package of dotnetfx 3.0 SP1 available for download?
>
> > Thank you all !
>
> This what you looking for?
>
> http://www.microsoft.com/downloads/d...d=EC2CA85D-B25....

Thank you for the pointer, but that's exactly the file that I DO NOT
want !

I need the "redistributable" package, aka, the FULL PACKAGE for
DotNetfx 3.0 SP1.

Thank you !!M

>
> Took less than 10 seconds to find via Google.
>
> Results 1 - 10 of about 376,000 for dotnet 3.0 SP1. (0.12 seconds)

m

Could you not just use the 3.5 redist? This includes 3.0 SP1, and will
make future 3.5 development simple.

The full package is near the bottom, under "Full Package":

http://www.microsoft.com/downloads/d...displaylang=en

Marc

Marc Gravell wrote:
> Could you not just use the 3.5 redist? This includes 3.0 SP1, and will
> make future 3.5 development simple.

3.5 won't install unless 3.0 is already installed.


>
> The full package is near the bottom, under "Full Package":
>
> http://www.microsoft.com/downloads/d...displaylang=en
>
> Marc

Hari Hari Mau wrote:
> Hello.
>
> We have some secured PCs that are not connected to the internet. I
> have downloaded the dotnetfx 3.0 and installed in these PCs quite some
> time ago, and am thinking of downloading the dotnetfx 3.0 Service Pack
> 1 (SP1) to update those machines.
>
> Unfortunately, all that I can get is that "dotnetfx30sp1setup.exe"
> file that requires PCs to be connected to the internet to get the SP1.
>
> Is there a full package of dotnetfx 3.0 SP1 available for download?

Yes, at Microsoft. Did you even look there?
http://www.microsoft.com/downloads/d...displaylang=en

Hari Hari Mau wrote:
> On Aug 15, 7:29 pm, Desk Rabbit <nos...@example.com> wrote:
>> Hari Hari Mau wrote:
>>> Hello.
>>> We have some secured PCs that are not connected to the internet. I
>>> have downloaded the dotnetfx 3.0 and installed in these PCs quite some
>>> time ago, and am thinking of downloading the dotnetfx 3.0 Service Pack
>>> 1 (SP1) to update those machines.
>>> Unfortunately, all that I can get is that "dotnetfx30sp1setup.exe"
>>> file that requires PCs to be connected to the internet to get the SP1.
>>> Is there a full package of dotnetfx 3.0 SP1 available for download?
>>> Thank you all !
>> This what you looking for?
>>
>> http://www.microsoft.com/downloads/d...d=EC2CA85D-B25...
>
> Thank you for the pointer, but that's exactly the file that I DO NOT
> want !
>
> I need the "redistributable" package, aka, the FULL PACKAGE for
> DotNetfx 3.0 SP1.
Ah sorry, didn't realise you had been there, done that.

Quick look again suggests that what you are looking for doesn't exist.
3.0 is available as a redist download.

>
> Thank you !!M
Sorry I couldn't help.

Have you tried? I'm pretty sure you can use the 3.5 installer even from
vanilla.

Marc

That is 3.0, not 3.0 SP1

Marc

relic wrote in news:248mp1.tk7.17.1@news.alt.net:

> Marc Gravell wrote:
>> Could you not just use the 3.5 redist? This includes 3.0 SP1, and will
>> make future 3.5 development simple.
>
> 3.5 won't install unless 3.0 is already installed.

He's right though - the only way to get the already installed 3.0 to SP1
level without using the bootstrapper is to install the 3.5 redistributable.

>> The full package is near the bottom, under "Full Package":
>>
>> http://www.microsoft.com/downloads/d...displaylang=en
>>
>> Marc
>
>

--
Cod Almighty

alt.usenet.kooks
"We are arrant knaves all, believe none of us."
Hamlet, Act 3, Scene 1 [129]

Hammer of Thor: February 2007. Pierre Salinger Memorial Hook,
Line & Sinker: September 2005, April 2006, January 2007.
Official Member: Cabal Obsidian Order COOSN-124-07-06660
Official Overseer of Kooks & Trolls in 24hoursupport.helpdesk

relic wrote in news:248mqi.tmk.17.1@news.alt.net:

> Hari Hari Mau wrote:
>> Hello.
>>
>> We have some secured PCs that are not connected to the internet. I
>> have downloaded the dotnetfx 3.0 and installed in these PCs quite some
>> time ago, and am thinking of downloading the dotnetfx 3.0 Service Pack
>> 1 (SP1) to update those machines.
>>
>> Unfortunately, all that I can get is that "dotnetfx30sp1setup.exe"
>> file that requires PCs to be connected to the internet to get the SP1.
>>
>> Is there a full package of dotnetfx 3.0 SP1 available for download?
>
> Yes, at Microsoft. Did you even look there?
> http://www.microsoft.com/downloads/d...displaylang=en


Date Published: 11/21/2006

That's 3.0, not 3.0 SP1. Better you should send a cmsg cancel now, mate.

--
Cod Almighty

alt.usenet.kooks
"We are arrant knaves all, believe none of us."
Hamlet, Act 3, Scene 1 [129]

Hammer of Thor: February 2007. Pierre Salinger Memorial Hook,
Line & Sinker: September 2005, April 2006, January 2007.
Official Member: Cabal Obsidian Order COOSN-124-07-06660
Official Overseer of Kooks & Trolls in 24hoursupport.helpdesk

> relic wrote in news:248mqi.tmk.17.1@news.alt.net:
>
>> Hari Hari Mau wrote:
>>> Hello.
>>>
>>> We have some secured PCs that are not connected to the internet. I
>>> have downloaded the dotnetfx 3.0 and installed in these PCs quite
>>> some time ago, and am thinking of downloading the dotnetfx 3.0
>>> Service Pack 1 (SP1) to update those machines.
>>>
>>> Unfortunately, all that I can get is that "dotnetfx30sp1setup.exe"
>>> file that requires PCs to be connected to the internet to get the
>>> SP1.
>>>
>>> Is there a full package of dotnetfx 3.0 SP1 available for download?
>>
>> Yes, at Microsoft. Did you even look there?
>> http://www.microsoft.com/downloads/d...displaylang=en
>
>
> Date Published: 11/21/2006
>
> That's 3.0, not 3.0 SP1. Better you should send a cmsg cancel now,
> mate.

You know, I read the OP three times and missed "SP1" every time. Dumb. Shoot
me now.

Sorry, everyone.

On Aug 18, 10:34*pm, "relic" <rel...@cjb.net> wrote:
> Hari Hari Mau wrote:
> > Hello.
>
> > We have some secured PCs that are not connected to the internet. I
> > have downloaded the dotnetfx 3.0 and installed in these PCs quite some
> > time ago, and am thinking of downloading the dotnetfx 3.0 Service Pack
> > 1 (SP1) to update those machines.
>
> > Unfortunately, all that I can get is that "dotnetfx30sp1setup.exe"
> > file that requires PCs to be connected to the internet to get the SP1.
>
> > Is there a full package of dotnetfx 3.0 SP1 available for download?
>
> Yes, at Microsoft. Did you even look there?http://www.microsoft.com/downloads/d...D=10CC340B-F85...


Uh .... sorry man. That's the "Setup program", meaning, you gotta be
connected to the Net in order to get the whole thing downloaded.

The guy is looking for the FULL PACKAGE for his "secured PCs", which,
if you bothered to read his post, clearly indicated that they are NOT
connected to the Net, for "obvious security reasons".

pg wrote:
> On Aug 18, 10:34 pm, "relic" <rel...@cjb.net> wrote:
>> Hari Hari Mau wrote:
>>> Hello.
>>
>>> We have some secured PCs that are not connected to the internet. I
>>> have downloaded the dotnetfx 3.0 and installed in these PCs quite
>>> some time ago, and am thinking of downloading the dotnetfx 3.0
>>> Service Pack 1 (SP1) to update those machines.
>>
>>> Unfortunately, all that I can get is that "dotnetfx30sp1setup.exe"
>>> file that requires PCs to be connected to the internet to get the
>>> SP1.
>>
>>> Is there a full package of dotnetfx 3.0 SP1 available for download?
>>
>> Yes, at Microsoft. Did you even look
>> there?http://www.microsoft.com/downloads/d...D=10CC340B-F85...
>
>
> Uh .... sorry man. That's the "Setup program", meaning, you gotta be
> connected to the Net in order to get the whole thing downloaded.

Uh .... sorry man. That's the Redistributable Package, not the Installer
Stub. But, if you had read the thread you would have seen that a later post
from relic acknowledge that he gave the link for the 3.0 package because he
missed the SP1 requirement. Someone else gave the OP a method to get a full
3.0 SP1 by getting 3.5 Redistributable.

>
> The guy is looking for the FULL PACKAGE for his "secured PCs", which,
> if you bothered to read his post, clearly indicated that they are NOT
> connected to the Net, for "obvious security reasons".

....and had you read the "THREAD", you would have not posted.