Vista to XP Share Across Internet "net use" Not Working

Hi,

Scenario:
A nightly robocopy mirror batch file across the internet. The
connection/setup has never changed and XP to XP still works today. My new
Vista to the XP (across town) is the problem.

Situation:
I had to purchase Vista x64 and built a brand new machine. Very little
software on this new desktop and it is litterally 2 weeks old. I have tried
disabling the firewall, McAfee Virusscan, etc. Removed IP6, changed most of
my settings back to XP look, feel and still no go.

Vista things that work are pretty much everything as long as its to do with
the local network. This includes net use, firewalls on, mapping drives,
remote desktop, you name it. Outside the network for internet and things do
work as well, eg. ports 80, 21, 3389, 25, etc.

So far all I know is port 139 is the only does not work and is what I need.
As stated before my ole XP desktop is letterally beside my new Vista and
continues to work this port 139 if I ask it to, so this shows that the
network portion/tracert is there and configuations are working and this has
to do with the something inside the new Vista x64.

I get the network path not found error 53 or 0x80070035 under the GUI. I
changed the "Outbound Rules" for port 139 btu still no go.

What can I do? You would not believe what I've tried over a weeks worth of
reading, implementing and changing but I have reverted them all back, so each
change starts from square one as it is a brand new install.

Thanks for your time.

If start the computer with safe mode with network, can you access it?

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com


"Godofgods" <Godofgods@discussions.microsoft.com> wrote in message
news:3259D278-C75C-44C1-B4CD-E017466D5756@microsoft.com...
> Hi,
>
> Scenario:
> A nightly robocopy mirror batch file across the internet. The
> connection/setup has never changed and XP to XP still works today. My new
> Vista to the XP (across town) is the problem.
>
> Situation:
> I had to purchase Vista x64 and built a brand new machine. Very little
> software on this new desktop and it is litterally 2 weeks old. I have
> tried
> disabling the firewall, McAfee Virusscan, etc. Removed IP6, changed most
> of
> my settings back to XP look, feel and still no go.
>
> Vista things that work are pretty much everything as long as its to do
> with
> the local network. This includes net use, firewalls on, mapping drives,
> remote desktop, you name it. Outside the network for internet and things
> do
> work as well, eg. ports 80, 21, 3389, 25, etc.
>
> So far all I know is port 139 is the only does not work and is what I
> need.
> As stated before my ole XP desktop is letterally beside my new Vista and
> continues to work this port 139 if I ask it to, so this shows that the
> network portion/tracert is there and configuations are working and this
> has
> to do with the something inside the new Vista x64.
>
> I get the network path not found error 53 or 0x80070035 under the GUI. I
> changed the "Outbound Rules" for port 139 btu still no go.
>
> What can I do? You would not believe what I've tried over a weeks worth
> of
> reading, implementing and changing but I have reverted them all back, so
> each
> change starts from square one as it is a brand new install.
>
> Thanks for your time.

I tried and still no go. It gives a system error 67 this time.

Thoughts?



"Robert L. (MS-MVP)" wrote:

> If start the computer with safe mode with network, can you access it?
>
> --
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on
> http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on
> http://www.HowToNetworking.com
>
>
> "Godofgods" <Godofgods@discussions.microsoft.com> wrote in message
> news:3259D278-C75C-44C1-B4CD-E017466D5756@microsoft.com...
> > Hi,
> >
> > Scenario:
> > A nightly robocopy mirror batch file across the internet. The
> > connection/setup has never changed and XP to XP still works today. My new
> > Vista to the XP (across town) is the problem.
> >
> > Situation:
> > I had to purchase Vista x64 and built a brand new machine. Very little
> > software on this new desktop and it is litterally 2 weeks old. I have
> > tried
> > disabling the firewall, McAfee Virusscan, etc. Removed IP6, changed most
> > of
> > my settings back to XP look, feel and still no go.
> >
> > Vista things that work are pretty much everything as long as its to do
> > with
> > the local network. This includes net use, firewalls on, mapping drives,
> > remote desktop, you name it. Outside the network for internet and things
> > do
> > work as well, eg. ports 80, 21, 3389, 25, etc.
> >
> > So far all I know is port 139 is the only does not work and is what I
> > need.
> > As stated before my ole XP desktop is letterally beside my new Vista and
> > continues to work this port 139 if I ask it to, so this shows that the
> > network portion/tracert is there and configuations are working and this
> > has
> > to do with the something inside the new Vista x64.
> >
> > I get the network path not found error 53 or 0x80070035 under the GUI. I
> > changed the "Outbound Rules" for port 139 btu still no go.
> >
> > What can I do? You would not believe what I've tried over a weeks worth
> > of
> > reading, implementing and changing but I have reverted them all back, so
> > each
> > change starts from square one as it is a brand new install.
> >
> > Thanks for your time.
>
>

Any error in the event viewer? Also make sure workstation service isrunngn.
or check this search result.

System ErrorsMore troubleshooting here System error 67 has occurred. System
error 85 has occurred. The local device name is already in use Cause: net
use /persistent:yes ...
www.chicagotech.net/systemerrors.htm


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com


"Godofgods" <Godofgods@discussions.microsoft.com> wrote in message
news:54A49E54-2F65-4A8E-9471-95F3FF0885F2@microsoft.com...
>I tried and still no go. It gives a system error 67 this time.
>
> Thoughts?
>
>
>
> "Robert L. (MS-MVP)" wrote:
>
>> If start the computer with safe mode with network, can you access it?
>>
>> --
>> Bob Lin, MS-MVP, MCSE & CNE
>> Networking, Internet, Routing, VPN Troubleshooting on
>> http://www.ChicagoTech.net
>> How to Setup Windows, Network, VPN & Remote Access on
>> http://www.HowToNetworking.com
>>
>>
>> "Godofgods" <Godofgods@discussions.microsoft.com> wrote in message
>> news:3259D278-C75C-44C1-B4CD-E017466D5756@microsoft.com...
>> > Hi,
>> >
>> > Scenario:
>> > A nightly robocopy mirror batch file across the internet. The
>> > connection/setup has never changed and XP to XP still works today. My
>> > new
>> > Vista to the XP (across town) is the problem.
>> >
>> > Situation:
>> > I had to purchase Vista x64 and built a brand new machine. Very little
>> > software on this new desktop and it is litterally 2 weeks old. I have
>> > tried
>> > disabling the firewall, McAfee Virusscan, etc. Removed IP6, changed
>> > most
>> > of
>> > my settings back to XP look, feel and still no go.
>> >
>> > Vista things that work are pretty much everything as long as its to do
>> > with
>> > the local network. This includes net use, firewalls on, mapping
>> > drives,
>> > remote desktop, you name it. Outside the network for internet and
>> > things
>> > do
>> > work as well, eg. ports 80, 21, 3389, 25, etc.
>> >
>> > So far all I know is port 139 is the only does not work and is what I
>> > need.
>> > As stated before my ole XP desktop is letterally beside my new Vista
>> > and
>> > continues to work this port 139 if I ask it to, so this shows that the
>> > network portion/tracert is there and configuations are working and this
>> > has
>> > to do with the something inside the new Vista x64.
>> >
>> > I get the network path not found error 53 or 0x80070035 under the GUI.
>> > I
>> > changed the "Outbound Rules" for port 139 btu still no go.
>> >
>> > What can I do? You would not believe what I've tried over a weeks
>> > worth
>> > of
>> > reading, implementing and changing but I have reverted them all back,
>> > so
>> > each
>> > change starts from square one as it is a brand new install.
>> >
>> > Thanks for your time.
>>
>>

No event viewer logs. Workstation is running. It certainly looks as though
its trying to work as if I run 2 windows the second window indicates the 67
or 85 error...if I wait long enough though both command windows fails.



"Robert L. (MS-MVP)" wrote:

> Any error in the event viewer? Also make sure workstation service isrunngn.
> or check this search result.
>
> System ErrorsMore troubleshooting here System error 67 has occurred. System
> error 85 has occurred. The local device name is already in use Cause: net
> use /persistent:yes ...
> www.chicagotech.net/systemerrors.htm
>
>
> --
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on
> http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on
> http://www.HowToNetworking.com
>
>
> "Godofgods" <Godofgods@discussions.microsoft.com> wrote in message
> news:54A49E54-2F65-4A8E-9471-95F3FF0885F2@microsoft.com...
> >I tried and still no go. It gives a system error 67 this time.
> >
> > Thoughts?
> >
> >
> >
> > "Robert L. (MS-MVP)" wrote:
> >
> >> If start the computer with safe mode with network, can you access it?
> >>
> >> --
> >> Bob Lin, MS-MVP, MCSE & CNE
> >> Networking, Internet, Routing, VPN Troubleshooting on
> >> http://www.ChicagoTech.net
> >> How to Setup Windows, Network, VPN & Remote Access on
> >> http://www.HowToNetworking.com
> >>
> >>
> >> "Godofgods" <Godofgods@discussions.microsoft.com> wrote in message
> >> news:3259D278-C75C-44C1-B4CD-E017466D5756@microsoft.com...
> >> > Hi,
> >> >
> >> > Scenario:
> >> > A nightly robocopy mirror batch file across the internet. The
> >> > connection/setup has never changed and XP to XP still works today. My
> >> > new
> >> > Vista to the XP (across town) is the problem.
> >> >
> >> > Situation:
> >> > I had to purchase Vista x64 and built a brand new machine. Very little
> >> > software on this new desktop and it is litterally 2 weeks old. I have
> >> > tried
> >> > disabling the firewall, McAfee Virusscan, etc. Removed IP6, changed
> >> > most
> >> > of
> >> > my settings back to XP look, feel and still no go.
> >> >
> >> > Vista things that work are pretty much everything as long as its to do
> >> > with
> >> > the local network. This includes net use, firewalls on, mapping
> >> > drives,
> >> > remote desktop, you name it. Outside the network for internet and
> >> > things
> >> > do
> >> > work as well, eg. ports 80, 21, 3389, 25, etc.
> >> >
> >> > So far all I know is port 139 is the only does not work and is what I
> >> > need.
> >> > As stated before my ole XP desktop is letterally beside my new Vista
> >> > and
> >> > continues to work this port 139 if I ask it to, so this shows that the
> >> > network portion/tracert is there and configuations are working and this
> >> > has
> >> > to do with the something inside the new Vista x64.
> >> >
> >> > I get the network path not found error 53 or 0x80070035 under the GUI.
> >> > I
> >> > changed the "Outbound Rules" for port 139 btu still no go.
> >> >
> >> > What can I do? You would not believe what I've tried over a weeks
> >> > worth
> >> > of
> >> > reading, implementing and changing but I have reverted them all back,
> >> > so
> >> > each
> >> > change starts from square one as it is a brand new install.
> >> >
> >> > Thanks for your time.
> >>
> >>
>
>