Go Back   TechArena Community > Technical Support > Computer Help > Windows XP > Windows Update
Become a Member!
Forgot your username/password?
Register Tags Active Topics RSS Search Mark Forums Read SiteMap

Tags: , ,

Sponsored Links



Update Microsoft.NET Framework version 1.1 failed

Windows Update


Reply
 
Thread Tools Search this Thread
  #1  
Old 21-06-2008
robrpb
 
Posts: n/a
Update Microsoft.NET Framework version 1.1 failed

I have just did a clean install of Windows XP Media Center. I used windows
update (custom) to install the updates and most of them were installed with
SP3. When I try to install "Microsoft.NET Framework version 1.1" it says that
it failed and was not installed. There is no error code. I appreciate your
help on how to install it. I am trying to install it so that I can install
KB900325 Update rollup for Windows XP Media Center. Thanks.
Reply With Quote
  #2  
Old 21-06-2008
PA Bear [MS MVP]
 
Posts: n/a
Re: Update Microsoft.NET Framework version 1.1 failed

How to determine which versions of the .NET Framework are installed and
whether service packs have been applied
http://support.microsoft.com/kb/318785

Do you find any version of .NET Framework 1.1 already installed?
--
~Robear Dyer (PA Bear)
MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
AumHa VSOP & Admin http://aumha.net
DTS-L http://dts-l.net/


robrpb wrote:
> I have just did a clean install of Windows XP Media Center. I used windows
> update (custom) to install the updates and most of them were installed
> with
> SP3. When I try to install "Microsoft.NET Framework version 1.1" it says
> that it failed and was not installed. There is no error code. I appreciate
> your help on how to install it. I am trying to install it so that I can
> install KB900325 Update rollup for Windows XP Media Center. Thanks.


Reply With Quote
  #3  
Old 21-06-2008
robrpb
 
Posts: n/a
Re: Update Microsoft.NET Framework version 1.1 failed

PA Bear, thanks for your help. I have v1.0.3705 on my computer. Beacuse I
have v1.0 on my computer shouldn't I be able to install v1.1 and also v2.0?

"PA Bear [MS MVP]" wrote:

> How to determine which versions of the .NET Framework are installed and
> whether service packs have been applied
> http://support.microsoft.com/kb/318785
>
> Do you find any version of .NET Framework 1.1 already installed?
> --
> ~Robear Dyer (PA Bear)
> MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
> AumHa VSOP & Admin http://aumha.net
> DTS-L http://dts-l.net/
>
>
> robrpb wrote:
> > I have just did a clean install of Windows XP Media Center. I used windows
> > update (custom) to install the updates and most of them were installed
> > with
> > SP3. When I try to install "Microsoft.NET Framework version 1.1" it says
> > that it failed and was not installed. There is no error code. I appreciate
> > your help on how to install it. I am trying to install it so that I can
> > install KB900325 Update rollup for Windows XP Media Center. Thanks.

>
>

Reply With Quote
  #4  
Old 21-06-2008
PA Bear [MS MVP]
 
Posts: n/a
Re: Update Microsoft.NET Framework version 1.1 failed

A. Did you install WinXP SP3 via Windows Update or manually? Have you
rebooted since you installed SP3?

What anti-virus application or security suite is installed? What
anti-spyware applications (other than Defender)? What third-party firewall
(if any)? Were ANY of these applications running in the background when you
installed SP3 (and/or SP2)?

B. The above notwithstanding:

CrystalBall© sez...

Updates are not installed successfully from Windows Update, from Microsoft
Update, or by using Automatic Updates after you repair a Windows XP
installation:
http://support.microsoft.com/kb/943144

NB: Also applies to clean installs, upgrade installs, and Recovery installs.

C. If the problem persists after reregistering the DLL(s) in 943144:

1. Write down what .NET Framework versions are already installed before you
go uninstalling/removing any of them!

How to determine which versions of the .NET Framework are installed and
whether service packs have been applied
http://support.microsoft.com/kb/318785

2. Now see Resolutions Methods 1 or 2 in
http://support.microsoft.com/kb/923100 (ignore the title).

If no joy, see this related post by my colleague MowGreen:
http://groups.google.com/group/micro...76de7769d04493
--
~Robear Dyer (PA Bear)
MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
AumHa VSOP & Admin http://aumha.net
DTS-L http://dts-l.net/


robrpb wrote:
> PA Bear, thanks for your help. I have v1.0.3705 on my computer. Beacuse I
> have v1.0 on my computer shouldn't I be able to install v1.1 and also
> v2.0?
>
> "PA Bear [MS MVP]" wrote:
>> How to determine which versions of the .NET Framework are installed and
>> whether service packs have been applied
>> http://support.microsoft.com/kb/318785
>>
>> Do you find any version of .NET Framework 1.1 already installed?
>> --
>> robrpb wrote:
>>> I have just did a clean install of Windows XP Media Center. I used
>>> windows
>>> update (custom) to install the updates and most of them were installed
>>> with
>>> SP3. When I try to install "Microsoft.NET Framework version 1.1" it says
>>> that it failed and was not installed. There is no error code. I
>>> appreciate
>>> your help on how to install it. I am trying to install it so that I can
>>> install KB900325 Update rollup for Windows XP Media Center. Thanks.


Reply With Quote
  #5  
Old 21-06-2008
robrpb
 
Posts: n/a
Re: Update Microsoft.NET Framework version 1.1 failed

A. I installed Win XP3 via windows update using custom rather than express
after a clean install of XP. I have booted many times since installing. Since
doing the clean install I have not installed an anti-virus, security suite,
Defender, or any other related security software.

B. I ran 943144

C.
1. The only .NET framework on the computer is v1.0.3705

2. I did not try installing any other .NET framework or any other updates yet.



"PA Bear [MS MVP]" wrote:

> A. Did you install WinXP SP3 via Windows Update or manually? Have you
> rebooted since you installed SP3?
>
> What anti-virus application or security suite is installed? What
> anti-spyware applications (other than Defender)? What third-party firewall
> (if any)? Were ANY of these applications running in the background when you
> installed SP3 (and/or SP2)?
>
> B. The above notwithstanding:
>
> CrystalBall© sez...
>
> Updates are not installed successfully from Windows Update, from Microsoft
> Update, or by using Automatic Updates after you repair a Windows XP
> installation:
> http://support.microsoft.com/kb/943144
>
> NB: Also applies to clean installs, upgrade installs, and Recovery installs.
>
> C. If the problem persists after reregistering the DLL(s) in 943144:
>
> 1. Write down what .NET Framework versions are already installed before you
> go uninstalling/removing any of them!
>
> How to determine which versions of the .NET Framework are installed and
> whether service packs have been applied
> http://support.microsoft.com/kb/318785
>
> 2. Now see Resolutions Methods 1 or 2 in
> http://support.microsoft.com/kb/923100 (ignore the title).
>
> If no joy, see this related post by my colleague MowGreen:
> http://groups.google.com/group/micro...76de7769d04493
> --
> ~Robear Dyer (PA Bear)
> MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
> AumHa VSOP & Admin http://aumha.net
> DTS-L http://dts-l.net/
>
>
> robrpb wrote:
> > PA Bear, thanks for your help. I have v1.0.3705 on my computer. Beacuse I
> > have v1.0 on my computer shouldn't I be able to install v1.1 and also
> > v2.0?
> >
> > "PA Bear [MS MVP]" wrote:
> >> How to determine which versions of the .NET Framework are installed and
> >> whether service packs have been applied
> >> http://support.microsoft.com/kb/318785
> >>
> >> Do you find any version of .NET Framework 1.1 already installed?
> >> --
> >> robrpb wrote:
> >>> I have just did a clean install of Windows XP Media Center. I used
> >>> windows
> >>> update (custom) to install the updates and most of them were installed
> >>> with
> >>> SP3. When I try to install "Microsoft.NET Framework version 1.1" it says
> >>> that it failed and was not installed. There is no error code. I
> >>> appreciate
> >>> your help on how to install it. I am trying to install it so that I can
> >>> install KB900325 Update rollup for Windows XP Media Center. Thanks.

>
>

Reply With Quote
  #6  
Old 21-06-2008
PA Bear [MS MVP]
 
Posts: n/a
Re: Update Microsoft.NET Framework version 1.1 failed

Why did you do a "clean install"?

> Since doing the clean install I have not installed an anti-virus, security
> suite, Defender, or any other related security software.


Excuse me? Your currently running without an anti-virus application? Not a
good idea IMHO. Please tell me that the Windows Firewall is enabled, at
least.

Protect Your PC!
http://www.microsoft.com/athome/secu...r/default.mspx

> B. I ran 943144


Is Microsoft.NET Framework version 1.1 still failing to install? If so, is
it a Service Pack for version 1.1 (e.g., Microsoft.NET Framework version 1.1
SP1)?

> C.
> 1. The only .NET framework on the computer is v1.0.3705
>
> 2. I did not try installing any other .NET framework or any other updates
> yet.


If the problem persists, try Resolutions Method 1 and/or Method 2 in
http://support.microsoft.com/kb/923100
--
~PA Bear


robrpb wrote:
> A. I installed Win XP3 via windows update using custom rather than express
> after a clean install of XP. I have booted many times since installing.
> Since doing the clean install I have not installed an anti-virus, security
> suite, Defender, or any other related security software.
>
> B. I ran 943144
>
> C.
> 1. The only .NET framework on the computer is v1.0.3705
>
> 2. I did not try installing any other .NET framework or any other updates
> yet.
>
>
>
> "PA Bear [MS MVP]" wrote:
>
>> A. Did you install WinXP SP3 via Windows Update or manually? Have you
>> rebooted since you installed SP3?
>>
>> What anti-virus application or security suite is installed? What
>> anti-spyware applications (other than Defender)? What third-party
>> firewall
>> (if any)? Were ANY of these applications running in the background when
>> you installed SP3 (and/or SP2)?
>>
>> B. The above notwithstanding:
>>
>> CrystalBall© sez...
>>
>> Updates are not installed successfully from Windows Update, from
>> Microsoft
>> Update, or by using Automatic Updates after you repair a Windows XP
>> installation:
>> http://support.microsoft.com/kb/943144
>>
>> NB: Also applies to clean installs, upgrade installs, and Recovery
>> installs.
>>
>> C. If the problem persists after reregistering the DLL(s) in 943144:
>>
>> 1. Write down what .NET Framework versions are already installed before
>> you
>> go uninstalling/removing any of them!
>>
>> How to determine which versions of the .NET Framework are installed and
>> whether service packs have been applied
>> http://support.microsoft.com/kb/318785
>>
>> 2. Now see Resolutions Methods 1 or 2 in
>> http://support.microsoft.com/kb/923100 (ignore the title).
>>
>> If no joy, see this related post by my colleague MowGreen:
>> http://groups.google.com/group/micro...76de7769d04493
>> --
>> ~Robear Dyer (PA Bear)
>> MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
>> AumHa VSOP & Admin http://aumha.net
>> DTS-L http://dts-l.net/
>>
>>
>> robrpb wrote:
>>> PA Bear, thanks for your help. I have v1.0.3705 on my computer. Beacuse
>>> I
>>> have v1.0 on my computer shouldn't I be able to install v1.1 and also
>>> v2.0?
>>>
>>> "PA Bear [MS MVP]" wrote:
>>>> How to determine which versions of the .NET Framework are installed and
>>>> whether service packs have been applied
>>>> http://support.microsoft.com/kb/318785
>>>>
>>>> Do you find any version of .NET Framework 1.1 already installed?
>>>> --
>>>> robrpb wrote:
>>>>> I have just did a clean install of Windows XP Media Center. I used
>>>>> windows
>>>>> update (custom) to install the updates and most of them were installed
>>>>> with
>>>>> SP3. When I try to install "Microsoft.NET Framework version 1.1" it
>>>>> says
>>>>> that it failed and was not installed. There is no error code. I
>>>>> appreciate
>>>>> your help on how to install it. I am trying to install it so that I
>>>>> can
>>>>> install KB900325 Update rollup for Windows XP Media Center. Thanks.


Reply With Quote
  #7  
Old 21-06-2008
robrpb
 
Posts: n/a
Re: Update Microsoft.NET Framework version 1.1 failed

The hard drive failed and when I replaced it I decided to make it a Media
Center computer.

After reading your post I was able to install .NET Framework v1.1 and then I
was able to install the Update Rollup 2 update. Hopefully tomorrow I will be
able to set up the computer to my tv. Thanks for your help.


"PA Bear [MS MVP]" wrote:

> Why did you do a "clean install"?
>
> > Since doing the clean install I have not installed an anti-virus, security
> > suite, Defender, or any other related security software.

>
> Excuse me? Your currently running without an anti-virus application? Not a
> good idea IMHO. Please tell me that the Windows Firewall is enabled, at
> least.
>
> Protect Your PC!
> http://www.microsoft.com/athome/secu...r/default.mspx
>
> > B. I ran 943144

>
> Is Microsoft.NET Framework version 1.1 still failing to install? If so, is
> it a Service Pack for version 1.1 (e.g., Microsoft.NET Framework version 1.1
> SP1)?
>
> > C.
> > 1. The only .NET framework on the computer is v1.0.3705
> >
> > 2. I did not try installing any other .NET framework or any other updates
> > yet.

>
> If the problem persists, try Resolutions Method 1 and/or Method 2 in
> http://support.microsoft.com/kb/923100
> --
> ~PA Bear
>
>
> robrpb wrote:
> > A. I installed Win XP3 via windows update using custom rather than express
> > after a clean install of XP. I have booted many times since installing.
> > Since doing the clean install I have not installed an anti-virus, security
> > suite, Defender, or any other related security software.
> >
> > B. I ran 943144
> >
> > C.
> > 1. The only .NET framework on the computer is v1.0.3705
> >
> > 2. I did not try installing any other .NET framework or any other updates
> > yet.
> >
> >
> >
> > "PA Bear [MS MVP]" wrote:
> >
> >> A. Did you install WinXP SP3 via Windows Update or manually? Have you
> >> rebooted since you installed SP3?
> >>
> >> What anti-virus application or security suite is installed? What
> >> anti-spyware applications (other than Defender)? What third-party
> >> firewall
> >> (if any)? Were ANY of these applications running in the background when
> >> you installed SP3 (and/or SP2)?
> >>
> >> B. The above notwithstanding:
> >>
> >> CrystalBall© sez...
> >>
> >> Updates are not installed successfully from Windows Update, from
> >> Microsoft
> >> Update, or by using Automatic Updates after you repair a Windows XP
> >> installation:
> >> http://support.microsoft.com/kb/943144
> >>
> >> NB: Also applies to clean installs, upgrade installs, and Recovery
> >> installs.
> >>
> >> C. If the problem persists after reregistering the DLL(s) in 943144:
> >>
> >> 1. Write down what .NET Framework versions are already installed before
> >> you
> >> go uninstalling/removing any of them!
> >>
> >> How to determine which versions of the .NET Framework are installed and
> >> whether service packs have been applied
> >> http://support.microsoft.com/kb/318785
> >>
> >> 2. Now see Resolutions Methods 1 or 2 in
> >> http://support.microsoft.com/kb/923100 (ignore the title).
> >>
> >> If no joy, see this related post by my colleague MowGreen:
> >> http://groups.google.com/group/micro...76de7769d04493
> >> --
> >> ~Robear Dyer (PA Bear)
> >> MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
> >> AumHa VSOP & Admin http://aumha.net
> >> DTS-L http://dts-l.net/
> >>
> >>
> >> robrpb wrote:
> >>> PA Bear, thanks for your help. I have v1.0.3705 on my computer. Beacuse
> >>> I
> >>> have v1.0 on my computer shouldn't I be able to install v1.1 and also
> >>> v2.0?
> >>>
> >>> "PA Bear [MS MVP]" wrote:
> >>>> How to determine which versions of the .NET Framework are installed and
> >>>> whether service packs have been applied
> >>>> http://support.microsoft.com/kb/318785
> >>>>
> >>>> Do you find any version of .NET Framework 1.1 already installed?
> >>>> --
> >>>> robrpb wrote:
> >>>>> I have just did a clean install of Windows XP Media Center. I used
> >>>>> windows
> >>>>> update (custom) to install the updates and most of them were installed
> >>>>> with
> >>>>> SP3. When I try to install "Microsoft.NET Framework version 1.1" it
> >>>>> says
> >>>>> that it failed and was not installed. There is no error code. I
> >>>>> appreciate
> >>>>> your help on how to install it. I am trying to install it so that I
> >>>>> can
> >>>>> install KB900325 Update rollup for Windows XP Media Center. Thanks.

>
>

Reply With Quote
  #8  
Old 21-06-2008
PA Bear [MS MVP]
 
Posts: n/a
Re: Update Microsoft.NET Framework version 1.1 failed

YW. Thanks for the "rest of the story" and your feedback.

You now have the equivalent of a new computer, so...

Before You Connect a New Computer to the Internet
http://www.cert.org/tech_tips/before_you_plug_in.html
--
~Robear Dyer (PA Bear)
MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
AumHa VSOP & Admin http://aumha.net
DTS-L http://dts-l.net/



robrpb wrote:
> The hard drive failed and when I replaced it I decided to make it a Media
> Center computer.
>
> After reading your post I was able to install .NET Framework v1.1 and then
> I
> was able to install the Update Rollup 2 update. Hopefully tomorrow I will
> be
> able to set up the computer to my tv. Thanks for your help.
>
>
> "PA Bear [MS MVP]" wrote:
>
>> Why did you do a "clean install"?
>>
>>> Since doing the clean install I have not installed an anti-virus,
>>> security
>>> suite, Defender, or any other related security software.

>>
>> Excuse me? Your currently running without an anti-virus application?
>> Not
>> a good idea IMHO. Please tell me that the Windows Firewall is enabled,
>> at
>> least.
>>
>> Protect Your PC!
>> http://www.microsoft.com/athome/secu...r/default.mspx
>>
>>> B. I ran 943144

>>
>> Is Microsoft.NET Framework version 1.1 still failing to install? If so,
>> is
>> it a Service Pack for version 1.1 (e.g., Microsoft.NET Framework version
>> 1.1 SP1)?
>>
>>> C.
>>> 1. The only .NET framework on the computer is v1.0.3705
>>>
>>> 2. I did not try installing any other .NET framework or any other
>>> updates
>>> yet.

>>
>> If the problem persists, try Resolutions Method 1 and/or Method 2 in
>> http://support.microsoft.com/kb/923100
>> --
>> ~PA Bear
>>
>>
>> robrpb wrote:
>>> A. I installed Win XP3 via windows update using custom rather than
>>> express
>>> after a clean install of XP. I have booted many times since installing.
>>> Since doing the clean install I have not installed an anti-virus,
>>> security
>>> suite, Defender, or any other related security software.
>>>
>>> B. I ran 943144
>>>
>>> C.
>>> 1. The only .NET framework on the computer is v1.0.3705
>>>
>>> 2. I did not try installing any other .NET framework or any other
>>> updates
>>> yet.
>>>
>>>
>>>
>>> "PA Bear [MS MVP]" wrote:
>>>
>>>> A. Did you install WinXP SP3 via Windows Update or manually? Have you
>>>> rebooted since you installed SP3?
>>>>
>>>> What anti-virus application or security suite is installed? What
>>>> anti-spyware applications (other than Defender)? What third-party
>>>> firewall
>>>> (if any)? Were ANY of these applications running in the background
>>>> when
>>>> you installed SP3 (and/or SP2)?
>>>>
>>>> B. The above notwithstanding:
>>>>
>>>> CrystalBall© sez...
>>>>
>>>> Updates are not installed successfully from Windows Update, from
>>>> Microsoft
>>>> Update, or by using Automatic Updates after you repair a Windows XP
>>>> installation:
>>>> http://support.microsoft.com/kb/943144
>>>>
>>>> NB: Also applies to clean installs, upgrade installs, and Recovery
>>>> installs.
>>>>
>>>> C. If the problem persists after reregistering the DLL(s) in 943144:
>>>>
>>>> 1. Write down what .NET Framework versions are already installed before
>>>> you
>>>> go uninstalling/removing any of them!
>>>>
>>>> How to determine which versions of the .NET Framework are installed and
>>>> whether service packs have been applied
>>>> http://support.microsoft.com/kb/318785
>>>>
>>>> 2. Now see Resolutions Methods 1 or 2 in
>>>> http://support.microsoft.com/kb/923100 (ignore the title).
>>>>
>>>> If no joy, see this related post by my colleague MowGreen:
>>>> http://groups.google.com/group/micro...76de7769d04493
>>>> --
>>>> ~Robear Dyer (PA Bear)
>>>> MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
>>>> AumHa VSOP & Admin http://aumha.net
>>>> DTS-L http://dts-l.net/
>>>>
>>>>
>>>> robrpb wrote:
>>>>> PA Bear, thanks for your help. I have v1.0.3705 on my computer.
>>>>> Beacuse
>>>>> I
>>>>> have v1.0 on my computer shouldn't I be able to install v1.1 and also
>>>>> v2.0?
>>>>>
>>>>> "PA Bear [MS MVP]" wrote:
>>>>>> How to determine which versions of the .NET Framework are installed
>>>>>> and
>>>>>> whether service packs have been applied
>>>>>> http://support.microsoft.com/kb/318785
>>>>>>
>>>>>> Do you find any version of .NET Framework 1.1 already installed?
>>>>>> --
>>>>>> robrpb wrote:
>>>>>>> I have just did a clean install of Windows XP Media Center. I used
>>>>>>> windows
>>>>>>> update (custom) to install the updates and most of them were
>>>>>>> installed
>>>>>>> with
>>>>>>> SP3. When I try to install "Microsoft.NET Framework version 1.1" it
>>>>>>> says
>>>>>>> that it failed and was not installed. There is no error code. I
>>>>>>> appreciate
>>>>>>> your help on how to install it. I am trying to install it so that I
>>>>>>> can
>>>>>>> install KB900325 Update rollup for Windows XP Media Center. Thanks.


Reply With Quote
Reply

  TechArena Community > Technical Support > Computer Help > Windows XP > Windows Update


Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads for: "Update Microsoft.NET Framework version 1.1 failed"
Thread Thread Starter Forum Replies Last Post
Security Update for Microsoft .NET Framework, Version 1.1 Service Catman Windows Update 1 08-11-2008 08:37 AM
Security Update for Microsoft.NET Framework, Version 1.1 GrammyJo Windows Security 12 01-10-2008 12:56 AM
Unable to install Update for Microsoft .NET Framework, Version 1.1 Kim from Tukwila Windows Security 11 02-12-2007 07:38 AM
FAILED TO INSTALL Security Update for Microsoft .NET Framework, Version 2.0 (KB928365) SiGreen10 Windows Update 6 13-07-2007 03:43 AM
Unable to Update Microsoft .NET Framework, Version 2.0 gfbver Windows Update 2 26-05-2007 03:13 PM


All times are GMT +5.5. The time now is 01:51 PM.