Results 1 to 6 of 6

Thread: Subject: XP Pro Activation After Windows Update - Error Code 0x800

  1. #1
    Flash999 Guest

    Subject: XP Pro Activation After Windows Update - Error Code 0x800

    After connecting to windows update the other evening and downloading WGA &
    IE7 along with other updates my computer asked me to activate windows when it
    re-started.

    It could not connect to the internet now for some reason so I used telephone
    activation.

    I then typed in the activation code and the computer returned error code:
    Problem with Windows Activation : Error Code 0x8004050a and computer logs me
    out.

    When checking through "Windows Update.log" it seems to keep finding 3
    persisted download jobs. Finding 15 and restoring them failing on the
    following :

    Service: Warning: GetUserTokenFromSessionId failed with Error 800704dd for
    Session 0 and keeps looping through this until the reported failure above.

    Please don't give me the following advice :

    1. Contact MS - As I've got a support number and they have pointed me here
    or KB.

    2. Try starting in safe mode - I've tried that but it still asks for
    activation

    3. Re-Installing XP Pro - For some reason it will not start my XP Pro disk
    even with the 1st boot device set to CD-ROM. It does start up my old laptops
    XP Home Edition disk thus allowing me to go into Restore but even though I
    did create a restore point prior to updating cannot get rstrui.exe to run.

    4. Try posting on WGA forum - They claim the problem is nothing to do with
    them. Although there are similar posts going back 10 months there.

    5. Try posting in IE7 forum - same as answer 4 above.

    6. Tell me to install XP Home then run the XP Pro as I've acquired mutiple
    devices since buying this laptop 5 years ago and don't want to re-load all
    the drivers.

    7. My copy of windows XP Pro is genuine. I do have a COE.

    8. The computer had been running quite happily for the last 5 years before
    this set of updates.


  2. #2
    Flash999 Guest

    RE: Subject: XP Pro Activation After Windows Update - Error Code 0x800

    To add to the below the final message before hanging is DnldMgr : FATAL : DM
    : CBitsJob:: SetCallBackHanlder: SetNotifyInterface failed with 0x80080008

    "Flash999" wrote:

    > After connecting to windows update the other evening and downloading WGA &
    > IE7 along with other updates my computer asked me to activate windows when it
    > re-started.
    >
    > It could not connect to the internet now for some reason so I used telephone
    > activation.
    >
    > I then typed in the activation code and the computer returned error code:
    > Problem with Windows Activation : Error Code 0x8004050a and computer logs me
    > out.
    >
    > When checking through "Windows Update.log" it seems to keep finding 3
    > persisted download jobs. Finding 15 and restoring them failing on the
    > following :
    >
    > Service: Warning: GetUserTokenFromSessionId failed with Error 800704dd for
    > Session 0 and keeps looping through this until the reported failure above.
    >
    > Please don't give me the following advice :
    >
    > 1. Contact MS - As I've got a support number and they have pointed me here
    > or KB.
    >
    > 2. Try starting in safe mode - I've tried that but it still asks for
    > activation
    >
    > 3. Re-Installing XP Pro - For some reason it will not start my XP Pro disk
    > even with the 1st boot device set to CD-ROM. It does start up my old laptops
    > XP Home Edition disk thus allowing me to go into Restore but even though I
    > did create a restore point prior to updating cannot get rstrui.exe to run.
    >
    > 4. Try posting on WGA forum - They claim the problem is nothing to do with
    > them. Although there are similar posts going back 10 months there.
    >
    > 5. Try posting in IE7 forum - same as answer 4 above.
    >
    > 6. Tell me to install XP Home then run the XP Pro as I've acquired mutiple
    > devices since buying this laptop 5 years ago and don't want to re-load all
    > the drivers.
    >
    > 7. My copy of windows XP Pro is genuine. I do have a COE.
    >
    > 8. The computer had been running quite happily for the last 5 years before
    > this set of updates.
    >


  3. #3
    PA Bear [MS MVP] Guest

    Re: Subject: XP Pro Activation After Windows Update - Error Code 0x800

    Error messages that you may receive when you try to download and install
    updates from the Windows Update Web site, from the Microsoft Update Web
    site, or from a WSUS server: "0x800704DD," "0x80240020," or both:
    http://support.microsoft.com/kb/910341

    Make sure you called the right phone number:

    Free unlimited installation and compatibility support is available for
    Windows XP, but only for Service Pack 3 (SP3), until 14 Apr-09. Chat and
    e-mail support is available only in the United States and Canada.

    • US:
    http://support.microsoft.com/oas/def...3&gprid=522131

    • CA:
    http://support.microsoft.com/oas/def...3&gprid=522131

    • UK:
    http://support.microsoft.com/oas/def...3&gprid=522131

    • AU:
    http://support.microsoft.com/oas/def...3&gprid=522131

    • Other: http://support.microsoft.com/oas/def...spx?gprid=1173 | select
    Windows XP | select Windows XP Service Pack 3
    --
    ~Robear Dyer (PA Bear)
    MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
    AumHa VSOP & Admin http://aumha.net
    DTS-L http://dts-l.net/


    Flash999 wrote:
    > After connecting to windows update the other evening and downloading WGA &
    > IE7 along with other updates my computer asked me to activate windows when
    > it re-started.
    >
    > It could not connect to the internet now for some reason so I used
    > telephone
    > activation.
    >
    > I then typed in the activation code and the computer returned error code:
    > Problem with Windows Activation : Error Code 0x8004050a and computer logs
    > me
    > out.
    >
    > When checking through "Windows Update.log" it seems to keep finding 3
    > persisted download jobs. Finding 15 and restoring them failing on the
    > following :
    >
    > Service: Warning: GetUserTokenFromSessionId failed with Error 800704dd for
    > Session 0 and keeps looping through this until the reported failure above.
    >
    > Please don't give me the following advice :
    >
    > 1. Contact MS - As I've got a support number and they have pointed me here
    > or KB.
    >
    > 2. Try starting in safe mode - I've tried that but it still asks for
    > activation
    >
    > 3. Re-Installing XP Pro - For some reason it will not start my XP Pro disk
    > even with the 1st boot device set to CD-ROM. It does start up my old
    > laptops
    > XP Home Edition disk thus allowing me to go into Restore but even though I
    > did create a restore point prior to updating cannot get rstrui.exe to run.
    >
    > 4. Try posting on WGA forum - They claim the problem is nothing to do with
    > them. Although there are similar posts going back 10 months there.
    >
    > 5. Try posting in IE7 forum - same as answer 4 above.
    >
    > 6. Tell me to install XP Home then run the XP Pro as I've acquired mutiple
    > devices since buying this laptop 5 years ago and don't want to re-load all
    > the drivers.
    >
    > 7. My copy of windows XP Pro is genuine. I do have a COE.
    >
    > 8. The computer had been running quite happily for the last 5 years before
    > this set of updates.



  4. #4
    rhys Guest

    Re: Subject: XP Pro Activation After Windows Update - Error Code 0




    "PA Bear [MS MVP]" wrote:

    > Error messages that you may receive when you try to download and install
    > updates from the Windows Update Web site, from the Microsoft Update Web
    > site, or from a WSUS server: "0x800704DD," "0x80240020," or both:
    > http://support.microsoft.com/kb/910341
    >
    > Make sure you called the right phone number:
    >
    > Free unlimited installation and compatibility support is available for
    > Windows XP, but only for Service Pack 3 (SP3), until 14 Apr-09. Chat and
    > e-mail support is available only in the United States and Canada.
    >
    > • US:
    > http://support.microsoft.com/oas/def...3&gprid=522131
    >
    > • CA:
    > http://support.microsoft.com/oas/def...3&gprid=522131
    >
    > • UK:
    > http://support.microsoft.com/oas/def...3&gprid=522131
    >
    > • AU:
    > http://support.microsoft.com/oas/def...3&gprid=522131
    >
    > • Other: http://support.microsoft.com/oas/def...spx?gprid=1173 | select
    > Windows XP | select Windows XP Service Pack 3
    > --
    > ~Robear Dyer (PA Bear)
    > MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
    > AumHa VSOP & Admin http://aumha.net
    > DTS-L http://dts-l.net/
    >
    >
    > Flash999 wrote:
    > > After connecting to windows update the other evening and downloading WGA &
    > > IE7 along with other updates my computer asked me to activate windows when
    > > it re-started.
    > >
    > > It could not connect to the internet now for some reason so I used
    > > telephone
    > > activation.
    > >
    > > I then typed in the activation code and the computer returned error code:
    > > Problem with Windows Activation : Error Code 0x8004050a and computer logs
    > > me
    > > out.
    > >
    > > When checking through "Windows Update.log" it seems to keep finding 3
    > > persisted download jobs. Finding 15 and restoring them failing on the
    > > following :
    > >
    > > Service: Warning: GetUserTokenFromSessionId failed with Error 800704dd for
    > > Session 0 and keeps looping through this until the reported failure above.
    > >
    > > Please don't give me the following advice :
    > >
    > > 1. Contact MS - As I've got a support number and they have pointed me here
    > > or KB.
    > >
    > > 2. Try starting in safe mode - I've tried that but it still asks for
    > > activation
    > >
    > > 3. Re-Installing XP Pro - For some reason it will not start my XP Pro disk
    > > even with the 1st boot device set to CD-ROM. It does start up my old
    > > laptops
    > > XP Home Edition disk thus allowing me to go into Restore but even though I
    > > did create a restore point prior to updating cannot get rstrui.exe to run.
    > >
    > > 4. Try posting on WGA forum - They claim the problem is nothing to do with
    > > them. Although there are similar posts going back 10 months there.
    > >
    > > 5. Try posting in IE7 forum - same as answer 4 above.
    > >
    > > 6. Tell me to install XP Home then run the XP Pro as I've acquired mutiple
    > > devices since buying this laptop 5 years ago and don't want to re-load all
    > > the drivers.
    > >
    > > 7. My copy of windows XP Pro is genuine. I do have a COE.
    > >
    > > 8. The computer had been running quite happily for the last 5 years before
    > > this set of updates.

    >
    >


  5. #5
    rhys Guest

    Re: Subject: XP Pro Activation After Windows Update - Error Code 0

    i have the same message,have been unable to find a fix anywhere,now have no
    hair exc

    "PA Bear [MS MVP]" wrote:

    > Error messages that you may receive when you try to download and install
    > updates from the Windows Update Web site, from the Microsoft Update Web
    > site, or from a WSUS server: "0x800704DD," "0x80240020," or both:
    > http://support.microsoft.com/kb/910341
    >
    > Make sure you called the right phone number:
    >
    > Free unlimited installation and compatibility support is available for
    > Windows XP, but only for Service Pack 3 (SP3), until 14 Apr-09. Chat and
    > e-mail support is available only in the United States and Canada.
    >
    > • US:
    > http://support.microsoft.com/oas/def...3&gprid=522131
    >
    > • CA:
    > http://support.microsoft.com/oas/def...3&gprid=522131
    >
    > • UK:
    > http://support.microsoft.com/oas/def...3&gprid=522131
    >
    > • AU:
    > http://support.microsoft.com/oas/def...3&gprid=522131
    >
    > • Other: http://support.microsoft.com/oas/def...spx?gprid=1173 | select
    > Windows XP | select Windows XP Service Pack 3
    > --
    > ~Robear Dyer (PA Bear)
    > MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
    > AumHa VSOP & Admin http://aumha.net
    > DTS-L http://dts-l.net/
    >
    >
    > Flash999 wrote:
    > > After connecting to windows update the other evening and downloading WGA &
    > > IE7 along with other updates my computer asked me to activate windows when
    > > it re-started.
    > >
    > > It could not connect to the internet now for some reason so I used
    > > telephone
    > > activation.
    > >
    > > I then typed in the activation code and the computer returned error code:
    > > Problem with Windows Activation : Error Code 0x8004050a and computer logs
    > > me
    > > out.
    > >
    > > When checking through "Windows Update.log" it seems to keep finding 3
    > > persisted download jobs. Finding 15 and restoring them failing on the
    > > following :
    > >
    > > Service: Warning: GetUserTokenFromSessionId failed with Error 800704dd for
    > > Session 0 and keeps looping through this until the reported failure above.
    > >
    > > Please don't give me the following advice :
    > >
    > > 1. Contact MS - As I've got a support number and they have pointed me here
    > > or KB.
    > >
    > > 2. Try starting in safe mode - I've tried that but it still asks for
    > > activation
    > >
    > > 3. Re-Installing XP Pro - For some reason it will not start my XP Pro disk
    > > even with the 1st boot device set to CD-ROM. It does start up my old
    > > laptops
    > > XP Home Edition disk thus allowing me to go into Restore but even though I
    > > did create a restore point prior to updating cannot get rstrui.exe to run.
    > >
    > > 4. Try posting on WGA forum - They claim the problem is nothing to do with
    > > them. Although there are similar posts going back 10 months there.
    > >
    > > 5. Try posting in IE7 forum - same as answer 4 above.
    > >
    > > 6. Tell me to install XP Home then run the XP Pro as I've acquired mutiple
    > > devices since buying this laptop 5 years ago and don't want to re-load all
    > > the drivers.
    > >
    > > 7. My copy of windows XP Pro is genuine. I do have a COE.
    > >
    > > 8. The computer had been running quite happily for the last 5 years before
    > > this set of updates.

    >
    >


  6. #6
    PA Bear [MS MVP] Guest

    Re: Subject: XP Pro Activation After Windows Update - Error Code 0

    Buy a wig?

    Begin your own new thread about your computer & problem instead of hijacking
    someone else's thread from two years ago?


    rhys wrote:
    > i have the same message,have been unable to find a fix anywhere,now have
    > no
    > hair exc



Similar Threads

  1. Replies: 3
    Last Post: 04-05-2012, 12:24 PM
  2. Windows vista activation error code: 0xC004F063
    By AaAgMaN in forum Operating Systems
    Replies: 4
    Last Post: 21-03-2011, 01:03 PM
  3. Replies: 4
    Last Post: 18-05-2008, 03:35 PM
  4. Error Code: 8: 0x80004005 Windows Product Activation
    By Sabatogz in forum Windows Server Help
    Replies: 5
    Last Post: 10-12-2007, 09:38 PM
  5. Error code 0xC004E003 on windows activation.
    By Chitesh in forum Vista Help
    Replies: 5
    Last Post: 21-07-2006, 06:25 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,714,041,975.23020 seconds with 17 queries