KB911562 installation fails - Error Code 0x8007F0DA

[Brad]

Using Windows 2000 Professional. I confirmed that I have MDAC ver 2.8.1022.0
so I downloaded the file MDAC28-KB911562-x86-ENU.exe after original
installation failed. When running that, it states that "Product Version
Check: Failed, click here for details." Details state: "Update could not
identify the installed product version. The installation may be damaged."
Finally I get an error message in a window titled "KB911562 Setup Error" that
states, "KB911562 installation did not complete". What should I try next?
Thank you.

[MowGreen [MVP]]

Brad,

Did you use the Component Checker tool to confirm the correct version ?
http://support.microsoft.com/kb/301202

There's a link to it on this page :
MDAC Downloads
http://msdn.microsoft.com/data/mdac/...s/default.aspx

MowGreen [MVP 2003-2006]
===============
*-343-* FDNY
Never Forgotten
===============


Brad wrote:

> Using Windows 2000 Professional. I confirmed that I have MDAC ver 2.8.1022.0
> so I downloaded the file MDAC28-KB911562-x86-ENU.exe after original
> installation failed. When running that, it states that "Product Version
> Check: Failed, click here for details." Details state: "Update could not
> identify the installed product version. The installation may be damaged."
> Finally I get an error message in a window titled "KB911562 Setup Error" that
> states, "KB911562 installation did not complete". What should I try next?
> Thank you.

[Brad]

I just ran that program and the results are "MDAC 2.8 RTM".

Also, I forgot to mention that I do have Windows 2000 Service Pack 4
installed.

Any more thoughts?

Thanks
Brad

"MowGreen [MVP]" wrote:

> Brad,
>
> Did you use the Component Checker tool to confirm the correct version ?
> http://support.microsoft.com/kb/301202
>
> There's a link to it on this page :
> MDAC Downloads
> http://msdn.microsoft.com/data/mdac/...s/default.aspx
>
> MowGreen [MVP 2003-2006]
> ===============
> *-343-* FDNY
> Never Forgotten
> ===============
>
>
> Brad wrote:
>
> > Using Windows 2000 Professional. I confirmed that I have MDAC ver 2.8.1022.0
> > so I downloaded the file MDAC28-KB911562-x86-ENU.exe after original
> > installation failed. When running that, it states that "Product Version
> > Check: Failed, click here for details." Details state: "Update could not
> > identify the installed product version. The installation may be damaged."
> > Finally I get an error message in a window titled "KB911562 Setup Error" that
> > states, "KB911562 installation did not complete". What should I try next?
> > Thank you.
>

[Ano]

I have got exactly the same problem here (Windows 2000 SP4 machine)!

"Brad" wrote:

> I just ran that program and the results are "MDAC 2.8 RTM".
>
> Also, I forgot to mention that I do have Windows 2000 Service Pack 4
> installed.
>
> Any more thoughts?
>
> Thanks
> Brad
>
> "MowGreen [MVP]" wrote:
>
> > Brad,
> >
> > Did you use the Component Checker tool to confirm the correct version ?
> > http://support.microsoft.com/kb/301202
> >
> > There's a link to it on this page :
> > MDAC Downloads
> > http://msdn.microsoft.com/data/mdac/...s/default.aspx
> >
> > MowGreen [MVP 2003-2006]
> > ===============
> > *-343-* FDNY
> > Never Forgotten
> > ===============
> >
> >
> > Brad wrote:
> >
> > > Using Windows 2000 Professional. I confirmed that I have MDAC ver 2.8.1022.0
> > > so I downloaded the file MDAC28-KB911562-x86-ENU.exe after original
> > > installation failed. When running that, it states that "Product Version
> > > Check: Failed, click here for details." Details state: "Update could not
> > > identify the installed product version. The installation may be damaged."
> > > Finally I get an error message in a window titled "KB911562 Setup Error" that
> > > states, "KB911562 installation did not complete". What should I try next?
> > > Thank you.
> >

[Ano]

"Brad" <Brad@discussions.microsoft.com> wrote in message
news:D3F402C8-EE77-4E73-8747-5A2A628C0BE5@microsoft.com...
> I just ran that program and the results are "MDAC 2.8 RTM".
>
> Also, I forgot to mention that I do have Windows 2000 Service Pack 4
> installed.
>
> Any more thoughts?
>
> Thanks
> Brad

I have got exactly the same problem here :-(

[stickweldnow]

I too am having the same problem and have tried the fixes mentioned above.

[stickweldnow]

I got it, I found that I needed the windows 2000 service pack 4 with
microsoft data access components 2.8 SERVICE PACK 1 INSTALLED
The service pack 1 was the kicker.
Here is the link to the download:
http://www.ciac.org/ciac/bulletins/q-171.shtml


"stickweldnow" wrote:

> I too am having the same problem and have tried the fixes mentioned above.

[stickweldnow]

Well now I tried to update my laptop and no luck...it has 2.5 sp3 and nothing
is working...this blows big chunks.

"stickweldnow" wrote:

> I got it, I found that I needed the windows 2000 service pack 4 with
> microsoft data access components 2.8 SERVICE PACK 1 INSTALLED
> The service pack 1 was the kicker.
> Here is the link to the download:
> http://www.ciac.org/ciac/bulletins/q-171.shtml
>
>
> "stickweldnow" wrote:
>
> > I too am having the same problem and have tried the fixes mentioned above.

[Ano]

"stickweldnow" <stickweldnow@discussions.microsoft.com> wrote in message
news:5A0A99B4-897E-4611-A0B1-DCAA5A50E2EA@microsoft.com...
> Well now I tried to update my laptop and no luck...it has 2.5 sp3 and
nothing
> is working...this blows big chunks.

Same here, although I tried to install the security update that is
especially got the MDAC 2.5 sp3 version... So what I did is: I upgraded to
MDAC 2.8 SP1 first. Then the MDAC security update installed correctly. It is
a workaround though ;-)

Strangely, the MDAC version checker now says I am running a Windows XP SP2
system instead of a Windows 2000 SP4 system!!

Would it have to do with:
"Microsoft strongly recommends that all customers who currently use a
version of Windows that does not have Microsoft Data Access Components 2.7
Service Pack 1 or higher upgrade immediately to Microsoft Data Access
Components 2.8 Service Pack 1 or another supported version. The only
EXCEPTION to this notice is customers who currently use Windows 2000 Service
Pack 4 running Microsoft Data Access Components 2.5 Service Pack 3. See
Knowledge Base Article 915387 for more information."?

Does this mean you are "not strongly recommended to do this" on a W2000 SP4
system, or that you "should not do this" on a W2000 SP4 system?"

[Brad]

I saw a solution suggested in another thread to upgrade the 2.8 RTM to 2.81
(2.8 SP 1). I did that, then ran Windows Update again and voila, the
installation succeeded. Hope this helps.

Brad

"Ano" wrote:

> "Brad" <Brad@discussions.microsoft.com> wrote in message
> news:D3F402C8-EE77-4E73-8747-5A2A628C0BE5@microsoft.com...
> > I just ran that program and the results are "MDAC 2.8 RTM".
> >
> > Also, I forgot to mention that I do have Windows 2000 Service Pack 4
> > installed.
> >
> > Any more thoughts?
> >
> > Thanks
> > Brad
>
> I have got exactly the same problem here :-(
>
>
>

[stickweldnow]

How did you upgrade? I've tried all kinds of downloads but nothing is taking.
Any help would be great!

"Brad" wrote:

> I saw a solution suggested in another thread to upgrade the 2.8 RTM to 2.81
> (2.8 SP 1). I did that, then ran Windows Update again and voila, the
> installation succeeded. Hope this helps.
>
> Brad
>
> "Ano" wrote:
>
> > "Brad" <Brad@discussions.microsoft.com> wrote in message
> > news:D3F402C8-EE77-4E73-8747-5A2A628C0BE5@microsoft.com...
> > > I just ran that program and the results are "MDAC 2.8 RTM".
> > >
> > > Also, I forgot to mention that I do have Windows 2000 Service Pack 4
> > > installed.
> > >
> > > Any more thoughts?
> > >
> > > Thanks
> > > Brad
> >
> > I have got exactly the same problem here :-(
> >
> >
> >

[Ano]

"stickweldnow" <stickweldnow@discussions.microsoft.com> wrote in message
news:C80B30B1-B8A1-4BB9-900C-D30AFB3101EF@microsoft.com...
> How did you upgrade? I've tried all kinds of downloads but nothing is
taking.
> Any help would be great!

Dowload update MDAC 2.8 SP1 from
http://www.microsoft.com/downloads/d...displaylang=en
Install it.
Run Windows update again.

[webhostingcanada@gmail.com]

Hi Folks,

I have been reading this thread with much interest as I am having the
same problem wih WINDOWS 2000 Server SP4 that has MDAC 2.8 SP 1
installed.

I have tried alsmost everything to get this KB911562 MDAC patch
instlled. I get the same error as the fellow (Brad) who started this
thread (patch cannot identify correct MDAC version).

I have used MS Component Checker and found that MDAC 2.8 SP 1 for
WINDOWS XP!! is apparently installed on this box. This is obviously
wrong. I have even re-installed the MDAC 2.8 SP1 AGAIN and tried to
patch with KB911562 and still get the same error. Does anyone else have
this problem? Any help would be greatly appreciated.

GB
Vancouver, BC
Canada.



Ano wrote:
> "stickweldnow" <stickweldnow@discussions.microsoft.com> wrote in message
> news:C80B30B1-B8A1-4BB9-900C-D30AFB3101EF@microsoft.com...
> > How did you upgrade? I've tried all kinds of downloads but nothing is
> taking.
> > Any help would be great!
>
> Dowload update MDAC 2.8 SP1 from
> http://www.microsoft.com/downloads/d...displaylang=en
> Install it.
> Run Windows update again.

[stickweldnow]

I've been working with a MS tech via e-mail for a week, no progress at all,
so far he has had me duplicate most of the fixes that have been sugested here.
If I get anywhere, I'll let you know.
My case number is SRZ060419000809
We are back to where we started as of today.

"webhostingcanada@gmail.com" wrote:

> Hi Folks,
>
> I have been reading this thread with much interest as I am having the
> same problem wih WINDOWS 2000 Server SP4 that has MDAC 2.8 SP 1
> installed.
>
> I have tried alsmost everything to get this KB911562 MDAC patch
> instlled. I get the same error as the fellow (Brad) who started this
> thread (patch cannot identify correct MDAC version).
>
> I have used MS Component Checker and found that MDAC 2.8 SP 1 for
> WINDOWS XP!! is apparently installed on this box. This is obviously
> wrong. I have even re-installed the MDAC 2.8 SP1 AGAIN and tried to
> patch with KB911562 and still get the same error. Does anyone else have
> this problem? Any help would be greatly appreciated.
>
> GB
> Vancouver, BC
> Canada.
>
>
>
> Ano wrote:
> > "stickweldnow" <stickweldnow@discussions.microsoft.com> wrote in message
> > news:C80B30B1-B8A1-4BB9-900C-D30AFB3101EF@microsoft.com...
> > > How did you upgrade? I've tried all kinds of downloads but nothing is
> > taking.
> > > Any help would be great!
> >
> > Dowload update MDAC 2.8 SP1 from
> > http://www.microsoft.com/downloads/d...displaylang=en
> > Install it.
> > Run Windows update again.
>
>

[webhostingcanada@gmail.com]

Yes...Please do post a solution if you get one. Thanks for your
perserverence. I have gotten nowhere with this issue either.