Page 1 of 2 12 LastLast
Results 1 to 15 of 27

Thread: Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf

  1. #1
    Dan Guest

    Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf

    After I went to Windows Update, this message box now appears on my screen and
    it cannot be removed.

  2. #2
    PA Bear [MS MVP] Guest

    Re: Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf

    And your full Windows version would be...?
    See
    <http://groups.google.com/group/microsoft.public.windowsupdate/browse_frm/thread/51f25eebf57e8720>
    or
    <http://groups.google.com/group/microsoft.public.windowsxp.help_and_support/search?group=microsoft.public.windowsxp.help_and_support&q=Exception+Processing+Message+c0000013&qt_ g=Search+this+group>

  3. #3
    Mike Guest
    I have exactly the same problem - have you managed to solve it yet?

    I removed service pack 3 and now everything runs ok - takes a while, but
    worth it - hope this is of use.

  4. #4
    MowGreen [MVP] Guest
    You do know that Extended Support for SP2 will end in 2010, right ?
    That means no further security updates will be available for the system
    unless SP3 is installed by then.

    With SP3 installed, Extended Support will end in 2014.

    Windows XP Service Pack 3 (SP3)
    Use this forum for all issues related to Windows XP SP3
    http://forums.microsoft.com/TechNet/...2010&SiteID=17
    or
    http://support.microsoft.com/oas/def...3&gprid=522131

    " Free unlimited installation and compatibility support is available for
    Windows XP, but only for Service Pack 3 (SP3). This support for SP3 is
    valid until April 14, 2009. For more information about this policy,
    visit the Windows XP Support Lifecycle page located at
    http://support.microsoft.com/lifecycle/?p1=3223. Availability of chat or
    e-mail support differs depending on your geographic location. For
    customers residing in North America or Canada, chat and e-mail support
    is available.

    Some issues may require more advanced support for which there is a charge. "

    The answer lies in the words "Windows: No Disk", your PC is looking for a USB
    device - e.g. a USB stick or a cell phone - that you've recently plugged in
    and have removed without using the "remove hardware safely" option in the
    right hand bottom corner of your screen. Put the last USB device you used
    back into the USB port and then use the "remove software safely" option.

    The pop up message will disappear.

    Installed ITunes today for my IPod. Soon after the installation this Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6b7c comes up and just does not go away. I have tried clearing the recent opened documents 'clear button' in Taskarbar (going via Control Panel), have tried to update QuickTime Software, have also tried to properly ejecting the IPod aswell. But unfortunately, nothing seems to be working. I cannot go into 'regedit' since it is disabled by the Administrator.

    Is there any way at all that i can remove this stupid message? Furthermore, NOW i have just realised that I cannot access my 'Task Manager' button when you press Alt+Ctrl+Del (it is greyed out, whereas everything is still clickable).

    Remember, your system sees your Cricket internet device as a USB drive too. Removing it from you system improperly can cause similar issues.

  5. #5
    Viviane Guest
    Have had the Windows-No Disk / Error Processing Message c0000013 Parameters
    75b6bf7c since April of 2010. This Error message appeared AFTER an automatic
    Windows Update download. I have had my CPU at the computer shop twice
    already and the guys there cannot discover what the problems is.

    I have uninstalled and re-installed all printer original software,
    downloaded updates and installed those. I have uninstalled SP3; I have
    always used the "remove software safely" when using a cell phone, flash
    drive, etc.

    Sometimes I wonder if Microsoft deliberately causes errors of this type to
    try to force the people that use Windows XP into switching to the latest
    operating system: Windows 7. Can't prove it, but it sure is suspicious that
    numerous XP users have the SAME problem

    Which update? Our resident mind reader is on sabbatical on Jupiter. Did
    you try uninstalling the update?
    Auto Repair Shop?

    Aren't you the studious one...

    You were doing fine until this. Instead of starting your own thread with
    your specific problem, you hijack an old thread and then you blame M$. This
    will endear you to the people who may have considered helping you. The
    repair for most of these problems is usually simple. Taking your "CPU" to
    an auto repair shop, probably Best Buy, will cause you more harm than good.
    Those people have problems finding the on/off button.

    Now I suggest you try this again and ask your question like a normal human
    being and not an uneducated moron.

  6. #6
    Join Date
    May 2010
    Posts
    1

    Re: Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf

    I am receiving the same basic message as the original post. The operating system on this computer is: Windows XP with SP3 installed. The computer has a fresh installation of everything including a reformat of the hard drive. I have two CD/DVD players one of which does write to both CD's and DVD's. The other will write to CD's and will play DVD's. The computer is a HP Pavilion which I purchased new 3 or 4 years ago. The installation CD for Windows is the full installation version not the upgrade. It did not come with the computer. The origional installation was on the hard disk and though it looks to be there only locked up the computer when I tried to use it. The back up program disk burned at the time I purchased it do the same thing. Other than this problem the computer is running fine.

    To comment on an earlier reply to the post. I did not use any USB or other removable hardware that is not still connected. The message that comes up advises "No Disk". It does it whenever a disk (CD or DVD) is inserted or removed from either of the CD/DVD drives. The message also has option buttons to "Cancel", "Try Again" and "Continue". When this box pops up I have to click on Cancel 4 or 5 times to get it to close but it does close. If I do not close it when a disk is put in it will add another 4 or 5 (it has done both 4 and 5 times) to the stack. The stack of these boxes appear to be only one window, they do not look like 4 or 5 windows stacked on each other and then moved slightly apart as other applications in Windows will do.

    Any help ... with the exception of name calling ... will be greatly appreciated.

  7. #7
    Join Date
    Aug 2010
    Posts
    1

    Re: Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf

    check this out...this is the easy way to solve that problem...just run "regedit" the follow this

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows]

    then find the name ErrorMode and change its value data by doing right click on the errormode itself and change value date from 0 to 2...

    it really works....

    thanks
    it does work!!

  8. #8
    Join Date
    Sep 2010
    Posts
    1

    Re: Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf

    RE: check this out...this is the easy way to solve that problem...just run "regedit" the follow this

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Windows]

    then find the name ErrorMode and change its value data by doing right click on the errormode itself and change value date from 0 to 2...

    it really works....

    thanks
    it does work!!

    GENIOUS! WORKED PERFECTLY, THANK YOU!

  9. #9
    Join Date
    Sep 2010
    Posts
    1
    Thanks a lot it worked perfectly for me too !

    THANK YOU, THANK YOU, THANK YOU!! I know nothing about computers. I was starting to panic because mine has been crashing every time I would try to open any file that contained photos. (I'm a photographer) Also programs were slow to open and would freeze, especially outlook. Now after changing that one little number my computer is supper fast! I was about to take it to someone so they could fix it. I don't have the extra money to spend right now so I'm so thankful to you for posting this! You Rock.

    I just started getting this error message. I tried the repair. It worked. Thanks.

  10. #10
    Join Date
    Sep 2010
    Posts
    1

    Re: Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf


    Now here's a rare treat!
    Someone civil who knows what they are doing!
    THANK YOU for scratching this nagging itch!!!!!!!!
    The icing on the cake (although most won't care) would be the WHY & WHO TO BLAME for that c0000013 itch .......

  11. #11
    Join Date
    Jan 2011
    Posts
    1

    Re: Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf

    Quote Originally Posted by abolobna View Post
    check this out...this is the easy way to solve that problem...just run "regedit" the follow this

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows]

    then find the name ErrorMode and change its value data by doing right click on the errormode itself and change value date from 0 to 2...

    it really works....

    thanks
    it does work!!
    Oh great... I tried it and done, thanks.. verymuch.

  12. #12
    Join Date
    Jan 2011
    Posts
    1

    Re: Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf

    thanks very much for the fix it does work

  13. #13
    Join Date
    Jan 2011
    Location
    Malaysia
    Posts
    1

    Re: Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf

    Please help me...how can i remove it from my window

  14. #14
    Join Date
    Dec 2007
    Posts
    2,297

    Re: Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf

    Quote Originally Posted by m-amier View Post
    Please help me...how can i remove it from my window
    Have you followed the above workaround to solve this issue? In any case, you can try to disable your floppy disk from your BIOS. You can also just run "regedit" the follow this [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows] then find the name ErrorMode and change its value data by doing right click on the errormode itself and change value date from 0 to 2.

  15. #15
    Join Date
    Feb 2011
    Posts
    1

    Re: Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf

    Quote Originally Posted by abolobna View Post
    check this out...this is the easy way to solve that problem...just run "regedit" the follow this

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows]

    then find the name ErrorMode and change its value data by doing right click on the errormode itself and change value date from 0 to 2...

    it really works....

    thanks
    it does work!!
    wow thanks this worked I'll use your advice any day!

Page 1 of 2 12 LastLast

Similar Threads

  1. Replies: 1
    Last Post: 25-03-2013, 12:41 PM
  2. Replies: 4
    Last Post: 29-01-2012, 12:37 PM
  3. Replies: 4
    Last Post: 28-08-2009, 05:08 AM
  4. Replies: 3
    Last Post: 26-08-2009, 06:48 PM
  5. Replies: 1
    Last Post: 27-05-2007, 01:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •