Error 0x0000001A while installing Windows 7

[Ashert]

All, I'm set up Windows 7 X64 on a spotless pack. Which contain Intel Core i5 processor, 4GB OCZ RAM, Radeon 4890 VGA, Gigabyte P55-UD4P motherboard, two WD Caviar 640gb Black HDDs in search 1, and through the put in I repeatedly am stopped up by means of a STOP: 0x0000001A, MEMORY_MANAGEMENT fault, my motherboard is on the newest non-beta bios, can anybody supply help?

[GeforceUser]

This problem occurs because a coding error in the file Http.sys ago, by which it can damage the stack is. The problem occurs if the following conditions are met:

• On your computer, TDI filter driver installed. DI filter drivers are usually anti-virus or
• Firewall programs installed.
• The installed TDI filter drivers return to the I / O request TDI_SET_EVENT_HANDLER a STATUS_PENDING,

so that the call is processed as an asynchronous APC. A coding error in the Http.sys file may cause a stack corruption when the TDI filter driver I / O request asynchronously on a different thread TDI_SET_EVENT_HANDLER finished. The stack for the original. Thread is overwritten during the processing of I /O request. This leads to the Stop error message.

[Bull50]

This message may have different causes. Usually it is a bad driver Hard- und Software and / or a faulty interaction between hardware and software. Possible Cause could also defective and / or incompatible hardware components may be the start and / or interfere with ongoing operations. It can be solved by setting the BIOS to default values.

• If necessary, turn off the BIOS caching. (BIOS-Interne/Extreme-Cache, L2 cache, write-back cache on the hard disk controllers)
• Disable all shadow functions
• Disable Plug and Play (No makeup)
• Disable the BIOS virus protection

[DotNetUser]

When these end mistake communications take place, first attempt to resolution the problem by means of the Windows fault Reporting device that is mechanically show when any mistake take place. The Reporting device sends a mistake details to Microsoft and in order attach or a workaround reverse to you right away. The Reporting instruments send a fault details to Microsoft, and information can attach or a workaround reverse to you straight away. If no attach or workaround is obtainable, or if the attach or workaround details by the device does not resolution the fault, and then go after the process in the "Advanced Troubleshooting" division. If no attach or workaround is accessible, or if the attach or workaround details by the device does not resolution the fault, and then pursue the way in the "Advanced Troubleshooting" segment.