Page 2 of 2 FirstFirst 12
Results 16 to 25 of 25

Thread: DNS/Active Directory Issue

  1. #16
    Lem@community.nospam Guest

    RE: DNS/Active Directory Issue

    Hi David,

    I am closer to resolving the problem but running the dcdiag I still get this
    error about the frsevent failed but all other test passed and it seems like
    replication is working but I am still trying to figure this error out.

    If you have any suggestions please let me know.

  2. #17
    David Shen [MSFT] Guest

    RE: DNS/Active Directory Issue

    Hi LEM,

    Thanks for the reply.

    Based on the log file, I noticed the error message as follow.

    There are warning or error events within the last 24 hours after the SYSVOL
    has been shared. Failing SYSVOL replication problems may cause Group
    Policy problems. ......................... NETSERVER1 failed test frsevent

    As all other tests have passed, it seems that the server is working
    properly now. This error will be reported whenever there is any warning or
    error events within the last 24 hours. When did you run the dcdiag.exe
    tool? Did you run it just after you ran the “random clean” command. If you
    ran dcdiag tool just after you fixed the issue, this error might be
    reported even though the problem has gone away.

    Please check on all the domain controllers to see if SYSVOL contents have
    been replicated properly. Meanwhile, please wait for 24 hours and then run
    "dcdiag /fix" again to see if the error still exists.

    Hope it helps.

    David Shen
    Microsoft Online Partner Support


  3. #18
    Lem@community.nospam Guest

    RE: DNS/Active Directory Issue

    Hi David,

    I did run the dcdiag command after the rendom but it was a few days after
    and I also had to call microsoft which they fixed the problem at first but
    the frsevent error came up again today after I demoted my backup domain
    controller and then I promoted it again yesterday, since that was what the
    microsoft techs recommended that I do once I got a dcdiag with no failed
    tests.

    So Im thinking maybe I need to wait another 24 hours. But I also am able to
    replicate using the ntds under active directory sites and services.

    group policy seems to be working but here are my dcdiags from my primary and
    my secondary dcs

  4. #19
    Lem@community.nospam Guest

    RE: DNS/Active Directory Issue

    Hi David,

    I just wanted to update that waiting and running dcdiag did turn out to be
    part of the solution. But for some strange reason now my secondary dc is
    having an issue with the frsevent failing but Im going to wait on that one as
    well.

    Thanks for all your help. The dcdiag and netdiag tests are now without any
    failures.

  5. #20
    David Shen [MSFT] Guest

    RE: DNS/Active Directory Issue

    Hello Lem,

    It seems that the issue has been resolve on the PDC. For the error on the
    secondary DC, please keep wait on and run "dcdiag /fix" again to check if
    the error will re-ocurr.

    If the issue still exists, please collect Directory Edition of MPS_Report
    log for further research.

    Please Download the Directory Edition of MPS_Report tool from
    <http://download.microsoft.com/downlo...e5-a579-30b0bd
    915706/MPSRPT_DirSvc.EXE>, run it on the problematic domain controller. The
    %COMPUTERNAME%_MPSReports_.CAB file which is under the
    %systemroot%\MPSReports\Setup\Lite\Cab directory.

    Please send the text file and MPS report CAB file to tfwst@microsoft.com,
    and then I am happy to be of assistance. As I noticed that you have
    contacted CSS, you may also reopen the case to work with the support
    engineer if the issue is urgent. Generally speaking, phone call support is
    more efficient than newsgroup reply :)

    Thanks for the co-operation.

    David Shen
    Microsoft Online Partner Support


  6. #21
    David Shen [MSFT] Guest

    RE: DNS/Active Directory Issue

    Hello Lem,

    It seems that the issue has been resolve on the PDC. For the error on the
    secondary DC, please keep wait on and run "dcdiag /fix" again to check if
    the error will re-ocurr.

    If the issue still exists, please collect Directory Edition of MPS_Report
    log for further research.

    Please Download the Directory Edition of MPS_Report tool from
    <http://download.microsoft.com/downlo...e5-a579-30b0bd
    915706/MPSRPT_DirSvc.EXE>, run it on the problematic domain controller. The
    %COMPUTERNAME%_MPSReports_.CAB file which is under the
    %systemroot%\MPSReports\Setup\Lite\Cab directory.

    Please send the text file and MPS report CAB file to tfwst@microsoft.com,
    and then I am happy to be of assistance. As I noticed that you have
    contacted CSS, you may also reopen the case to work with the support
    engineer if the issue is urgent. Generally speaking, phone call support is
    more efficient than newsgroup reply :)

    Thanks for the co-operation.

    David Shen
    Microsoft Online Partner Support


  7. #22
    Lem@community.nospam Guest

    RE: DNS/Active Directory Issue

    Thanks David,

    I appreciate your responses, but I contacted the support rep and he
    continues to tell me that the frsevent is referring to old event logs. Which
    I find questionable since now the frsevent test failed again now on both
    domain controllers.

    The microsoft rep continues to say as long as no services are affected they
    do not troubleshoot errors or warnings unless they cause work stoppages.
    Its true that group policy seems to be functioning properly and I can
    replicate using the ntds settings but its got to be some reason the test
    bounces back and forth between pass and fail and now both are failing the
    frsevent.

    Before I request a different support technician I would like your opinion on
    my situation, because it is my understanding that this frsevent test should
    not be failing.

    Thanks

    "David Shen [MSFT]" wrote:

    > Hello Lem,
    >
    > It seems that the issue has been resolve on the PDC. For the error on the
    > secondary DC, please keep wait on and run "dcdiag /fix" again to check if
    > the error will re-ocurr.
    >
    > If the issue still exists, please collect Directory Edition of MPS_Report
    > log for further research.
    >
    > Please Download the Directory Edition of MPS_Report tool from
    > <http://download.microsoft.com/downlo...e5-a579-30b0bd
    > 915706/MPSRPT_DirSvc.EXE>, run it on the problematic domain controller. The
    > %COMPUTERNAME%_MPSReports_.CAB file which is under the
    > %systemroot%\MPSReports\Setup\Lite\Cab directory.
    >
    > Please send the text file and MPS report CAB file to tfwst@microsoft.com,
    > and then I am happy to be of assistance. As I noticed that you have
    > contacted CSS, you may also reopen the case to work with the support
    > engineer if the issue is urgent. Generally speaking, phone call support is
    > more efficient than newsgroup reply :)
    >
    > Thanks for the co-operation.
    >
    > David Shen
    > Microsoft Online Partner Support
    >
    >


  8. #23
    David Shen [MSFT] Guest

    RE: DNS/Active Directory Issue

    Hello Lem,

    According to the experience, the error is reported when there are NTFRS
    warning or errors in the past 24 hours. To determine whether it is
    necessary to continue troubleshooting, please check the "File Replication
    Service" event log to see whether there are any errors in the past 24
    hours. Generally speaking, if the group policy can be replicated properly,
    FRS should be working normally.

    Hope it helps.

    David Shen
    Microsoft Online Partner Support


  9. #24
    Join Date
    Mar 2009
    Posts
    1

    Re: DNS/Active Directory Issue

    I had the same issue. I was able to get around it by creating the zone as a primary non-AD integrated and then going back and changing it to integrated. I still get the error but it makes it integrated and replicates it to all of my AD Servers.

  10. #25
    Meinolf Weber [MVP-DS] Guest

    Re: DNS/Active Directory Issue

    Hello csumrall,

    What posting are you referring to? In this newsgroup i can not find it. So
    please give a full description of your problem with OS version, SP/patches
    installed, server roles etc. Also post error messages from event viewer if
    exist.

    Best regards

    Meinolf Weber
    Disclaimer: This posting is provided "AS IS" with no warranties, and confers
    no rights.
    ** Please do NOT email, only reply to Newsgroups
    ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm


    > I had the same issue. I was able to get around it by creating the
    > zone as a primary non-AD integrated and then going back and changing
    > it to integrated. I still get the error but it makes it integrated
    > and replicates it to all of my AD Servers.
    >
    > http://forums.techarena.in
    >




Page 2 of 2 FirstFirst 12

Similar Threads

  1. How to use ldp.exe in Active Directory
    By Aanand in forum Active Directory
    Replies: 3
    Last Post: 19-11-2010, 05:06 AM
  2. How to Integrate with DNS in Active Directory?
    By Pakhi in forum Operating Systems
    Replies: 4
    Last Post: 29-10-2010, 05:39 AM
  3. Replies: 5
    Last Post: 22-05-2010, 07:33 AM
  4. Using ESM in Windows 7 Active Directory
    By Roockie in forum Operating Systems
    Replies: 4
    Last Post: 08-05-2010, 06:00 PM
  5. Active Directory and DMZ
    By maketu in forum Windows Security
    Replies: 1
    Last Post: 19-02-2008, 02:27 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,711,708,638.20729 seconds with 17 queries