Go Back   TechArena Community > Technical Support > Computer Help > Windows Server > Windows Server Help
Become a Member!
Forgot your username/password?
Tags Active Topics RSS Search Mark Forums Read

Sponsored Links



cluster service is requesting a bus reset for device

Windows Server Help


Reply
 
Thread Tools Search this Thread
  #1  
Old 26-01-2008
snazzy
 
Posts: n/a
cluster service is requesting a bus reset for device

The event id 1209: Source: ClusDisk
Description:
Cluster service is requesting a bus reset for device \Device\ClusDisk0
right before is fails with a event id 1034 Source: ClusSvc
Description:
The disk associated with cluster dis resource "Disk Q:" could not be found.

Reply With Quote
  #2  
Old 26-01-2008
Edwin vMierlo [MVP]
 
Posts: n/a
Re: cluster service is requesting a bus reset for device

In certain circumstances this is normal behaviour of a cluster, Example

- cluster node does not own the Quorum
- cluster node loses network connectivity with the node who owns the Quorum
- cluster node tries to *grab* the Quorum using a Bus Reset
- if the other node, owning the Quorum, is up and running then the node
trying will loose
- cannot grab Quorum, cannot reach over network -> service will terminate

Perfectly normal behaviour in some circumstances

Do you see "lost network connectivity" messages before the bus reset ?



"snazzy" <snazzy@discussions.microsoft.com> wrote in message
news:013423C7-6847-4D86-ADDD-FEFCD8BC94A5@microsoft.com...
> The event id 1209: Source: ClusDisk
> Description:
> Cluster service is requesting a bus reset for device \Device\ClusDisk0
> right before is fails with a event id 1034 Source: ClusSvc
> Description:
> The disk associated with cluster dis resource "Disk Q:" could not be

found.


Reply With Quote
  #3  
Old 30-01-2008
snazzy
 
Posts: n/a
Re: cluster service is requesting a bus reset for device

There are no network errors before the error 1209. However I have notice
that DTC cannot start. It gives a event id: 1067 The distributed transaction
coordinator service terminated unexpectedly.

"Edwin vMierlo [MVP]" wrote:

> In certain circumstances this is normal behaviour of a cluster, Example
>
> - cluster node does not own the Quorum
> - cluster node loses network connectivity with the node who owns the Quorum
> - cluster node tries to *grab* the Quorum using a Bus Reset
> - if the other node, owning the Quorum, is up and running then the node
> trying will loose
> - cannot grab Quorum, cannot reach over network -> service will terminate
>
> Perfectly normal behaviour in some circumstances
>
> Do you see "lost network connectivity" messages before the bus reset ?
>
>
>
> "snazzy" <snazzy@discussions.microsoft.com> wrote in message
> news:013423C7-6847-4D86-ADDD-FEFCD8BC94A5@microsoft.com...
> > The event id 1209: Source: ClusDisk
> > Description:
> > Cluster service is requesting a bus reset for device \Device\ClusDisk0
> > right before is fails with a event id 1034 Source: ClusSvc
> > Description:
> > The disk associated with cluster dis resource "Disk Q:" could not be

> found.
>
>
>

Reply With Quote
  #4  
Old 31-01-2008
John Toner [MVP]
 
Posts: n/a
Re: cluster service is requesting a bus reset for device

1209 events occur when the cluster node is attempting to forcefully take
over the quorum device. This typically happens when the node that does not
own the quorum loses network connectivity to the node that does own the
quorum device. This can also occur if you are attempting to start cluster
services on both nodes at the same time. These resets are part of the normal
quorum arbitration process.

Hope this helps.

Regards,
John

Visit my blog: http://msmvps.com/blogs/jtoner

"snazzy" <snazzy@discussions.microsoft.com> wrote in message
news:B538F32B-6AD8-482A-BF41-4C31FD17BBD1@microsoft.com...
> There are no network errors before the error 1209. However I have notice
> that DTC cannot start. It gives a event id: 1067 The distributed

transaction
> coordinator service terminated unexpectedly.
>
> "Edwin vMierlo [MVP]" wrote:
>
> > In certain circumstances this is normal behaviour of a cluster, Example
> >
> > - cluster node does not own the Quorum
> > - cluster node loses network connectivity with the node who owns the

Quorum
> > - cluster node tries to *grab* the Quorum using a Bus Reset
> > - if the other node, owning the Quorum, is up and running then the node
> > trying will loose
> > - cannot grab Quorum, cannot reach over network -> service will

terminate
> >
> > Perfectly normal behaviour in some circumstances
> >
> > Do you see "lost network connectivity" messages before the bus reset ?
> >
> >
> >
> > "snazzy" <snazzy@discussions.microsoft.com> wrote in message
> > news:013423C7-6847-4D86-ADDD-FEFCD8BC94A5@microsoft.com...
> > > The event id 1209: Source: ClusDisk
> > > Description:
> > > Cluster service is requesting a bus reset for device \Device\ClusDisk0
> > > right before is fails with a event id 1034 Source: ClusSvc
> > > Description:
> > > The disk associated with cluster dis resource "Disk Q:" could not be

> > found.
> >
> >
> >



Reply With Quote
  #5  
Old 22-02-2008
maxdout
 
Posts: n/a
Re: cluster service is requesting a bus reset for device

Is there anyway you can force the process or set the time limits?

"John Toner [MVP]" wrote:

> 1209 events occur when the cluster node is attempting to forcefully take
> over the quorum device. This typically happens when the node that does not
> own the quorum loses network connectivity to the node that does own the
> quorum device. This can also occur if you are attempting to start cluster
> services on both nodes at the same time. These resets are part of the normal
> quorum arbitration process.
>
> Hope this helps.
>
> Regards,
> John
>
> Visit my blog: http://msmvps.com/blogs/jtoner
>
> "snazzy" <snazzy@discussions.microsoft.com> wrote in message
> news:B538F32B-6AD8-482A-BF41-4C31FD17BBD1@microsoft.com...
> > There are no network errors before the error 1209. However I have notice
> > that DTC cannot start. It gives a event id: 1067 The distributed

> transaction
> > coordinator service terminated unexpectedly.
> >
> > "Edwin vMierlo [MVP]" wrote:
> >
> > > In certain circumstances this is normal behaviour of a cluster, Example
> > >
> > > - cluster node does not own the Quorum
> > > - cluster node loses network connectivity with the node who owns the

> Quorum
> > > - cluster node tries to *grab* the Quorum using a Bus Reset
> > > - if the other node, owning the Quorum, is up and running then the node
> > > trying will loose
> > > - cannot grab Quorum, cannot reach over network -> service will

> terminate
> > >
> > > Perfectly normal behaviour in some circumstances
> > >
> > > Do you see "lost network connectivity" messages before the bus reset ?
> > >
> > >
> > >
> > > "snazzy" <snazzy@discussions.microsoft.com> wrote in message
> > > news:013423C7-6847-4D86-ADDD-FEFCD8BC94A5@microsoft.com...
> > > > The event id 1209: Source: ClusDisk
> > > > Description:
> > > > Cluster service is requesting a bus reset for device \Device\ClusDisk0
> > > > right before is fails with a event id 1034 Source: ClusSvc
> > > > Description:
> > > > The disk associated with cluster dis resource "Disk Q:" could not be
> > > found.
> > >
> > >
> > >

>
>
>

Reply With Quote
  #6  
Old 22-02-2008
John Toner [MVP]
 
Posts: n/a
Re: cluster service is requesting a bus reset for device

Not sure what you're asking...you can't adjust the quorum arbitration
process if that's what you're getting at. You can adjust the network
heartbeats if you've got 2003 SP2 or SP1 with hotfix 921181 applied. See the
following for more details:

http://support.microsoft.com/kb/921181

Regards,
John

Visit my blog: http://msmvps.com/blogs/jtoner

"maxdout" <maxdout@discussions.microsoft.com> wrote in message
news:B5929911-68B6-47C4-BAB5-10A7830F5DC2@microsoft.com...
> Is there anyway you can force the process or set the time limits?
>
> "John Toner [MVP]" wrote:
>
> > 1209 events occur when the cluster node is attempting to forcefully take
> > over the quorum device. This typically happens when the node that does

not
> > own the quorum loses network connectivity to the node that does own the
> > quorum device. This can also occur if you are attempting to start

cluster
> > services on both nodes at the same time. These resets are part of the

normal
> > quorum arbitration process.
> >
> > Hope this helps.
> >
> > Regards,
> > John
> >
> > Visit my blog: http://msmvps.com/blogs/jtoner
> >
> > "snazzy" <snazzy@discussions.microsoft.com> wrote in message
> > news:B538F32B-6AD8-482A-BF41-4C31FD17BBD1@microsoft.com...
> > > There are no network errors before the error 1209. However I have

notice
> > > that DTC cannot start. It gives a event id: 1067 The distributed

> > transaction
> > > coordinator service terminated unexpectedly.
> > >
> > > "Edwin vMierlo [MVP]" wrote:
> > >
> > > > In certain circumstances this is normal behaviour of a cluster,

Example
> > > >
> > > > - cluster node does not own the Quorum
> > > > - cluster node loses network connectivity with the node who owns the

> > Quorum
> > > > - cluster node tries to *grab* the Quorum using a Bus Reset
> > > > - if the other node, owning the Quorum, is up and running then the

node
> > > > trying will loose
> > > > - cannot grab Quorum, cannot reach over network -> service will

> > terminate
> > > >
> > > > Perfectly normal behaviour in some circumstances
> > > >
> > > > Do you see "lost network connectivity" messages before the bus reset

?
> > > >
> > > >
> > > >
> > > > "snazzy" <snazzy@discussions.microsoft.com> wrote in message
> > > > news:013423C7-6847-4D86-ADDD-FEFCD8BC94A5@microsoft.com...
> > > > > The event id 1209: Source: ClusDisk
> > > > > Description:
> > > > > Cluster service is requesting a bus reset for device

\Device\ClusDisk0
> > > > > right before is fails with a event id 1034 Source: ClusSvc
> > > > > Description:
> > > > > The disk associated with cluster dis resource "Disk Q:" could not

be
> > > > found.
> > > >
> > > >
> > > >

> >
> >
> >



Reply With Quote
Reply

  TechArena Community > Technical Support > Computer Help > Windows Server > Windows Server Help
Tags: , , , ,



Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads for: "cluster service is requesting a bus reset for device"
Thread Thread Starter Forum Replies Last Post
Cluster Service can not be started after a re-boot! Need help ASA scott Windows Server Help 4 11-06-2010 08:56 PM
could not start the cluster service on node 2 Rami Khatib Windows Server Help 4 19-06-2009 09:07 PM
WINDOWS 2003 Cluster Service Yayi Windows Software 5 12-02-2009 12:21 PM
Cluster Service fails to start 1st time following reboot. Chalkie Windows Server Help 9 27-05-2008 10:39 PM
Cluster Service Not Starting on Win2003 - HELP! ikaikaokaina Windows Server Help 3 24-01-2006 04:08 AM


All times are GMT +5.5. The time now is 05:26 AM.