DHCP, Events 1010-1014-1016

Sponsored Links

Dear All,

I'm having windows 2003, and it's a domain member server. The DHCP is
enabled and autherised at that server. After enabling the DHCP I see Events
1010, 1016 and 1014 all the time at the event LOG. The errors are:
****
1010:
The DHCP service encountered the following error while cleaning up the
database:
An error occurred while accessing the DHCP database. Look at the
DHCP server event log for more information on this error.
******
1014:
The following problem occurred with the Jet database -1032: Jet database
read or write operations failed. If the computer or database has just been
upgraded, then this message can be safely ignored. If this message appears
frequently, either there is not enough disk space to complete the operation
or the database or backup database may be corrupt. To correct this problem,
either free additional space on your hard disk or restore the database.
After you restore the database, ensure that conflict detection is enabled in
DHCP server properties. For information about restoring the database, see
Help and Support Center. Additional Debug Information: JetBackup.
****
1016
The DHCP service encountered the following error when backing up the
database:
An error occurred while accessing the DHCP database. Look at the
DHCP server event log for more information on this error.
****

I hope you can help me on that.
Best regards,
--
*********
IT Manager
DeLaval Ltd.
Cairo-Egypt
*********
|-----------------------------|
|Islam is peace not Terror|
|-----------------------------|

See if the indexing service is running on the windows\system32\dhcp folder.
If it is, turn it off and see if these errors go away.

"Ibrahim Awwad" wrote:

> Dear All,
>
> I'm having windows 2003, and it's a domain member server. The DHCP is
> enabled and autherised at that server. After enabling the DHCP I see Events
> 1010, 1016 and 1014 all the time at the event LOG. The errors are:
> ****
> 1010:
> The DHCP service encountered the following error while cleaning up the
> database:
> An error occurred while accessing the DHCP database. Look at the
> DHCP server event log for more information on this error.
> ******
> 1014:
> The following problem occurred with the Jet database -1032: Jet database
> read or write operations failed. If the computer or database has just been
> upgraded, then this message can be safely ignored. If this message appears
> frequently, either there is not enough disk space to complete the operation
> or the database or backup database may be corrupt. To correct this problem,
> either free additional space on your hard disk or restore the database.
> After you restore the database, ensure that conflict detection is enabled in
> DHCP server properties. For information about restoring the database, see
> Help and Support Center. Additional Debug Information: JetBackup.
> ****
> 1016
> The DHCP service encountered the following error when backing up the
> database:
> An error occurred while accessing the DHCP database. Look at the
> DHCP server event log for more information on this error.
> ****
>
> I hope you can help me on that.
> Best regards,
> --
> *********
> IT Manager
> DeLaval Ltd.
> Cairo-Egypt
> *********
> |-----------------------------|
> |Islam is peace not Terror|
> |-----------------------------|

I have seen issues like this caused by antivirus software.

"Ibrahim Awwad" <ibrahim_awwad(at)hotmail(dot)com(antispam)> wrote in
message news:BBD330F5-1730-4385-B4CC-D902DBDC16CC@microsoft.com...
> Dear All,
>
> I'm having windows 2003, and it's a domain member server. The DHCP is
> enabled and autherised at that server. After enabling the DHCP I see
> Events
> 1010, 1016 and 1014 all the time at the event LOG. The errors are:
> ****
> 1010:
> The DHCP service encountered the following error while cleaning up the
> database:
> An error occurred while accessing the DHCP database. Look at the
> DHCP server event log for more information on this error.
> ******
> 1014:
> The following problem occurred with the Jet database -1032: Jet database
> read or write operations failed. If the computer or database has just
> been
> upgraded, then this message can be safely ignored. If this message
> appears
> frequently, either there is not enough disk space to complete the
> operation
> or the database or backup database may be corrupt. To correct this
> problem,
> either free additional space on your hard disk or restore the database.
> After you restore the database, ensure that conflict detection is enabled
> in
> DHCP server properties. For information about restoring the database, see
> Help and Support Center. Additional Debug Information: JetBackup.
> ****
> 1016
> The DHCP service encountered the following error when backing up the
> database:
> An error occurred while accessing the DHCP database. Look at the
> DHCP server event log for more information on this error.
> ****
>
> I hope you can help me on that.
> Best regards,
> --
> *********
> IT Manager
> DeLaval Ltd.
> Cairo-Egypt
> *********
> |-----------------------------|
> |Islam is peace not Terror|
> |-----------------------------|

Hi Roger,
Thanks for your reply, Well I've disabled the indexing service and I hope I
don't see this error again.

I saw a lot of posts asking the same in so many groups and all the suppoed
sollution like (the AV and the corrupted DB file) isn't working at all.

Any way I hope this indexing issue is ok
--
*********
IT Manager
DeLaval Ltd.
Cairo-Egypt
*********
|-----------------------------|
|Islam is peace not Terror|
|-----------------------------|


"!Roger!" wrote:

> See if the indexing service is running on the windows\system32\dhcp folder.
> If it is, turn it off and see if these errors go away.
>
> "Ibrahim Awwad" wrote:
>
> > Dear All,
> >
> > I'm having windows 2003, and it's a domain member server. The DHCP is
> > enabled and autherised at that server. After enabling the DHCP I see Events
> > 1010, 1016 and 1014 all the time at the event LOG. The errors are:
> > ****
> > 1010:
> > The DHCP service encountered the following error while cleaning up the
> > database:
> > An error occurred while accessing the DHCP database. Look at the
> > DHCP server event log for more information on this error.
> > ******
> > 1014:
> > The following problem occurred with the Jet database -1032: Jet database
> > read or write operations failed. If the computer or database has just been
> > upgraded, then this message can be safely ignored. If this message appears
> > frequently, either there is not enough disk space to complete the operation
> > or the database or backup database may be corrupt. To correct this problem,
> > either free additional space on your hard disk or restore the database.
> > After you restore the database, ensure that conflict detection is enabled in
> > DHCP server properties. For information about restoring the database, see
> > Help and Support Center. Additional Debug Information: JetBackup.
> > ****
> > 1016
> > The DHCP service encountered the following error when backing up the
> > database:
> > An error occurred while accessing the DHCP database. Look at the
> > DHCP server event log for more information on this error.
> > ****
> >
> > I hope you can help me on that.
> > Best regards,
> > --
> > *********
> > IT Manager
> > DeLaval Ltd.
> > Cairo-Egypt
> > *********
> > |-----------------------------|
> > |Islam is peace not Terror|
> > |-----------------------------|

Hi ROger,

Thanks for your reply, I have disabled the indeing service and I will see if
it will show up again for today or not.

Best regards
--
*********
IT Manager
DeLaval Ltd.
Cairo-Egypt
*********
|-----------------------------|
|Islam is peace not Terror|
|-----------------------------|


"!Roger!" wrote:

> See if the indexing service is running on the windows\system32\dhcp folder.
> If it is, turn it off and see if these errors go away.
>
> "Ibrahim Awwad" wrote:
>
> > Dear All,
> >
> > I'm having windows 2003, and it's a domain member server. The DHCP is
> > enabled and autherised at that server. After enabling the DHCP I see Events
> > 1010, 1016 and 1014 all the time at the event LOG. The errors are:
> > ****
> > 1010:
> > The DHCP service encountered the following error while cleaning up the
> > database:
> > An error occurred while accessing the DHCP database. Look at the
> > DHCP server event log for more information on this error.
> > ******
> > 1014:
> > The following problem occurred with the Jet database -1032: Jet database
> > read or write operations failed. If the computer or database has just been
> > upgraded, then this message can be safely ignored. If this message appears
> > frequently, either there is not enough disk space to complete the operation
> > or the database or backup database may be corrupt. To correct this problem,
> > either free additional space on your hard disk or restore the database.
> > After you restore the database, ensure that conflict detection is enabled in
> > DHCP server properties. For information about restoring the database, see
> > Help and Support Center. Additional Debug Information: JetBackup.
> > ****
> > 1016
> > The DHCP service encountered the following error when backing up the
> > database:
> > An error occurred while accessing the DHCP database. Look at the
> > DHCP server event log for more information on this error.
> > ****
> >
> > I hope you can help me on that.
> > Best regards,
> > --
> > *********
> > IT Manager
> > DeLaval Ltd.
> > Cairo-Egypt
> > *********
> > |-----------------------------|
> > |Islam is peace not Terror|
> > |-----------------------------|