Unable to install Update for Microsoft .NET Framework, Version 1.1

I can download it, but can't install:

Security Update for Microsoft .NET Framework, Version 1.1 Service Pack 1
(KB928366) Get this...: failed!

I've tried this many times manually, and it tries evey night during my
scheduled updates. This has been going on since July 07! In the meantime, I
HAVE successfully downloaded and installed several other updates.

Any ideas?
Do I need this? Microsoft recommends it, so I keep trying.

Also, earlier I posted a question about the gold shield..since I went to the
MS page for updates, my gold shield is now showing.
--
Kim C, Tukwila

"Kim from Tukwila" <KimfromTukwila@discussions.microsoft.com> wrote in
message news:FDAE7788-D8C7-4AB7-8B74-E20DC4EAD74C@microsoft.com...
>I can download it, but can't install:
>
> Security Update for Microsoft .NET Framework, Version 1.1 Service Pack 1
> (KB928366) Get this...: failed!
>
> I've tried this many times manually, and it tries evey night during my
> scheduled updates. This has been going on since July 07! In the meantime,
> I
> HAVE successfully downloaded and installed several other updates.
>
> Any ideas?
> Do I need this? Microsoft recommends it, so I keep trying.
>
> Also, earlier I posted a question about the gold shield..since I went to
> the
> MS page for updates, my gold shield is now showing.
> --
> Kim C, Tukwila
If you have .net framework 2.0 or 3.0 installed you do not need this update,
you should have installed kb928365 already. You don't need both kb928366 and
kb928365 installed. Please check in Add/Remove Programs|"show updates"
checked if you do not know whether you have .net framework 2.0/3.0
installed. Post back with the result if necessary.

If you are running Vista then uninstall .Net Framework 1.1, it isn't needed
and will cause this update issue.

"Kim from Tukwila" <KimfromTukwila@discussions.microsoft.com> wrote in
message news:FDAE7788-D8C7-4AB7-8B74-E20DC4EAD74C@microsoft.com...
> I can download it, but can't install:
>
> Security Update for Microsoft .NET Framework, Version 1.1 Service Pack 1
> (KB928366) Get this...: failed!
>
> I've tried this many times manually, and it tries evey night during my
> scheduled updates. This has been going on since July 07! In the meantime,
> I
> HAVE successfully downloaded and installed several other updates.
>
> Any ideas?
> Do I need this? Microsoft recommends it, so I keep trying.
>
> Also, earlier I posted a question about the gold shield..since I went to
> the
> MS page for updates, my gold shield is now showing.
> --
> Kim C, Tukwila

>> If you have .net framework 2.0 or 3.0 installed you do not need this
>> update, you should have installed kb928365 already.

What Utter Nonsense. Security updates for a specific .NET Framework have
NOTHING to do with any other version of .NET Frameworks that are installed.
If .NET Framework 1.1 is installed then one should install all Security
updates for it that are not superseded by any other Security updates for it.

MowGreen [MVP 2003-2008]
===============
*-343-* FDNY
Never Forgotten
===============



Allan wrote:

>
> "Kim from Tukwila" <KimfromTukwila@discussions.microsoft.com> wrote in
> message news:FDAE7788-D8C7-4AB7-8B74-E20DC4EAD74C@microsoft.com...
>
>> I can download it, but can't install:
>>
>> Security Update for Microsoft .NET Framework, Version 1.1 Service Pack 1
>> (KB928366) Get this...: failed!
>>
>> I've tried this many times manually, and it tries evey night during my
>> scheduled updates. This has been going on since July 07! In the
>> meantime, I
>> HAVE successfully downloaded and installed several other updates.
>>
>> Any ideas?
>> Do I need this? Microsoft recommends it, so I keep trying.
>>
>> Also, earlier I posted a question about the gold shield..since I went
>> to the
>> MS page for updates, my gold shield is now showing.
>> --
>> Kim C, Tukwila
>
> If you have .net framework 2.0 or 3.0 installed you do not need this
> update, you should have installed kb928365 already. You don't need both
> kb928366 and kb928365 installed. Please check in Add/Remove
> Programs|"show updates" checked if you do not know whether you have .net
> framework 2.0/3.0 installed. Post back with the result if necessary.

Go to Start > Run > copy and paste the below into the Open: line

%temp%\netfxsl.log
Click OK or press Enter

Post the section of the log that started in July of 2007 ONLY, please.


MowGreen [MVP 2003-2008]
===============
*-343-* FDNY
Never Forgotten
===============



Kim from Tukwila wrote:

> I can download it, but can't install:
>
> Security Update for Microsoft .NET Framework, Version 1.1 Service Pack 1
> (KB928366) Get this...: failed!
>
> I've tried this many times manually, and it tries evey night during my
> scheduled updates. This has been going on since July 07! In the meantime, I
> HAVE successfully downloaded and installed several other updates.
>
> Any ideas?
> Do I need this? Microsoft recommends it, so I keep trying.
>
> Also, earlier I posted a question about the gold shield..since I went to the
> MS page for updates, my gold shield is now showing.

"MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
news:%23wLL1EPFIHA.5160@TK2MSFTNGP05.phx.gbl...
>>> If you have .net framework 2.0 or 3.0 installed you do not need this
>>> update, you should have installed kb928365 already.
>
> What Utter Nonsense. Security updates for a specific .NET Framework have
> NOTHING to do with any other version of .NET Frameworks that are
> installed.
> If .NET Framework 1.1 is installed then one should install all Security
> updates for it that are not superseded by any other Security updates for
> it.
>
> MowGreen [MVP 2003-2008]
> ===============
> *-343-* FDNY
> Never Forgotten
> ===============
>
>
>
Thank you, Mow Green for your comments. I suggest that we attempt to resolve
our disagreement by asking the OP to install the Belarc Advisor version
7.2t, available from this hyperlink :
http://www.belarc.com/free_download.html . It will show what MS security
updates are missing from his system. I am sure that you are already familiar
with this useful service, Mow Green. If the OP will post back his result
here it may assist us in helping him to resolve this issue.
I would still like to know whether the OP has .Net Framework 2.0/3.0
installed in order to help him solve his problem.

I repeat, a Security update for .NET Framework 1.1 is intended for that
specific runtime *only*. It does not matter if there are other runtimes
installed. Sec updates for those other runtimes are *specific*, too.

*The* most common installation issue installing .NET Frameworks, Service
Packs, and Security updates for them are directly related to the
installed antivirus/security software.

MowGreen [MVP 2003-2008]
===============
*-343-* FDNY
Never Forgotten
===============



Allan wrote:

>
> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
> news:%23wLL1EPFIHA.5160@TK2MSFTNGP05.phx.gbl...
>
>>>> If you have .net framework 2.0 or 3.0 installed you do not need this
>>>> update, you should have installed kb928365 already.
>>
>>
>> What Utter Nonsense. Security updates for a specific .NET Framework
>> have NOTHING to do with any other version of .NET Frameworks that are
>> installed.
>> If .NET Framework 1.1 is installed then one should install all
>> Security updates for it that are not superseded by any other Security
>> updates for it.
>>
>> MowGreen [MVP 2003-2008]
>> ===============
>> *-343-* FDNY
>> Never Forgotten
>> ===============
>>
>>
>>
> Thank you, Mow Green for your comments. I suggest that we attempt to
> resolve our disagreement by asking the OP to install the Belarc Advisor
> version 7.2t, available from this hyperlink :
> http://www.belarc.com/free_download.html . It will show what MS security
> updates are missing from his system. I am sure that you are already
> familiar with this useful service, Mow Green. If the OP will post back
> his result here it may assist us in helping him to resolve this issue.
> I would still like to know whether the OP has .Net Framework 2.0/3.0
> installed in order to help him solve his problem.

"MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
news:%23fjNGfoFIHA.5544@TK2MSFTNGP02.phx.gbl...
>I repeat, a Security update for .NET Framework 1.1 is intended for that
>specific runtime *only*. It does not matter if there are other runtimes
>installed. Sec updates for those other runtimes are *specific*, too.
>
> *The* most common installation issue installing .NET Frameworks, Service
> Packs, and Security updates for them are directly related to the installed
> antivirus/security software.
>
> MowGreen [MVP 2003-2008]
> ===============
> *-343-* FDNY
> Never Forgotten
> ===============
>
>
>
> Allan wrote:
>
>>
>> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
>> news:%23wLL1EPFIHA.5160@TK2MSFTNGP05.phx.gbl...
>>
>>>>> If you have .net framework 2.0 or 3.0 installed you do not need this
>>>>> update, you should have installed kb928365 already.
>>>
>>>
>>> What Utter Nonsense. Security updates for a specific .NET Framework have
>>> NOTHING to do with any other version of .NET Frameworks that are
>>> installed.
>>> If .NET Framework 1.1 is installed then one should install all Security
>>> updates for it that are not superseded by any other Security updates for
>>> it.
>>>
>>> MowGreen [MVP 2003-2008]
>>> ===============
>>> *-343-* FDNY
>>> Never Forgotten
>>> ===============
>>>
>>>
>>>
>> Thank you, Mow Green for your comments. I suggest that we attempt to
>> resolve our disagreement by asking the OP to install the Belarc Advisor
>> version 7.2t, available from this hyperlink :
>> http://www.belarc.com/free_download.html . It will show what MS security
>> updates are missing from his system. I am sure that you are already
>> familiar with this useful service, Mow Green. If the OP will post back
>> his result here it may assist us in helping him to resolve this issue.
>> I would still like to know whether the OP has .Net Framework 2.0/3.0
>> installed in order to help him solve his problem.

Thank you again, Mow Green [MVP]. Here is the original security bulletin :
http://www.microsoft.com/technet/sec...ate=2007-07-10 .
It is the same security update and it only has to be installed once. That is
also why Belarc Advisor does not show that kb928366 is missing on systems
that have .Net Framework 2.0/3.0 installed, as long as kb928365 is already
installed. After all, you cannot install .Net Framework 2.0 without already
having .Net Framework 1.0/1.1 installed.
Since the OP has not posted back,I assume that he has solved his problem,
possibly as a result of our replies to his post. However, since so many
people have had problems with security updates to .Net Framework since July,
I am almost certain that he will not be the last.

http://www.microsoft.com/technet/sec...ate=2007-07-10

Frequently Asked Questions (FAQ) Related to This Security Update

" This security bulletin says that .NET Framework 3.0 is non-affected.
How does .NET Framework 3.0 relate to the previous versions that are
affected?

Microsoft .NET Framework 3.0 is a superset of .NET Framework 2.0.
Microsoft .NET Framework 3.0 listed as Non-Affected Software in this
security update refers to the four new technologies added as the
superset to the .NET Framework 2.0. These technologies are: Windows
Presentation Foundation (WPF), Windows Workflow Foundation (WF), Windows
Communication Foundation (WCF), and Windows CardSpace. The
vulnerabilities addressed in this security update do not affect any of
the four specific .NET Framework 3.0 technologies. Developers wishing to
learn more about the .NET Framework 3.0 and it’s relation to previous
version may refer to the following .NET Framework 3.0 Versioning and
Deployment MSDN article. Additional information for .NET Framework 3.0
may also be found in the following MSDN article.
http://msdn2.microsoft.com/en-us/net.../aa663309.aspx


I only have .NET Framework 3.0 installed. Why am I being offered the
security update?

There is no security update targeting the WPF, WF, WCF, and CardSpace
technologies that together make up Microsoft .NET Framework 3.0 as they
are not affected by any of the vulnerabilities in this security update.
However, every installation of Microsoft .NET Framework 3.0 also
includes .NET Framework 2.0, which is an affected product in this
security update and as such this update is offered to all systems where
applicable. "

..NET 1.1 SP1 and KB928366 have ***nothing*** to do with the above.
End of discussion.


MowGreen [MVP 2003-2008]
===============
*-343-* FDNY
Never Forgotten
===============



Allan wrote:

>
> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
> news:%23fjNGfoFIHA.5544@TK2MSFTNGP02.phx.gbl...
>
>> I repeat, a Security update for .NET Framework 1.1 is intended for
>> that specific runtime *only*. It does not matter if there are other
>> runtimes installed. Sec updates for those other runtimes are
>> *specific*, too.
>>
>> *The* most common installation issue installing .NET Frameworks,
>> Service Packs, and Security updates for them are directly related to
>> the installed antivirus/security software.
>>
>> MowGreen [MVP 2003-2008]
>> ===============
>> *-343-* FDNY
>> Never Forgotten
>> ===============
>>
>>
>>
>> Allan wrote:
>>
>>>
>>> "MowGreen [MVP]" <mowgreen@nowandzen.com> wrote in message
>>> news:%23wLL1EPFIHA.5160@TK2MSFTNGP05.phx.gbl...
>>>
>>>>>> If you have .net framework 2.0 or 3.0 installed you do not need
>>>>>> this update, you should have installed kb928365 already.
>>>>
>>>>
>>>>
>>>> What Utter Nonsense. Security updates for a specific .NET Framework
>>>> have NOTHING to do with any other version of .NET Frameworks that
>>>> are installed.
>>>> If .NET Framework 1.1 is installed then one should install all
>>>> Security updates for it that are not superseded by any other
>>>> Security updates for it.
>>>>
>>>> MowGreen [MVP 2003-2008]
>>>> ===============
>>>> *-343-* FDNY
>>>> Never Forgotten
>>>> ===============
>>>>
>>>>
>>>>
>>> Thank you, Mow Green for your comments. I suggest that we attempt to
>>> resolve our disagreement by asking the OP to install the Belarc
>>> Advisor version 7.2t, available from this hyperlink :
>>> http://www.belarc.com/free_download.html . It will show what MS
>>> security updates are missing from his system. I am sure that you are
>>> already familiar with this useful service, Mow Green. If the OP will
>>> post back his result here it may assist us in helping him to resolve
>>> this issue.
>>> I would still like to know whether the OP has .Net Framework 2.0/3.0
>>> installed in order to help him solve his problem.
>
>
> Thank you again, Mow Green [MVP]. Here is the original security bulletin
> :
> http://www.microsoft.com/technet/sec...ate=2007-07-10
> . It is the same security update and it only has to be installed once.
> That is also why Belarc Advisor does not show that kb928366 is missing
> on systems that have .Net Framework 2.0/3.0 installed, as long as
> kb928365 is already installed. After all, you cannot install .Net
> Framework 2.0 without already having .Net Framework 1.0/1.1 installed.
> Since the OP has not posted back,I assume that he has solved his
> problem, possibly as a result of our replies to his post. However, since
> so many people have had problems with security updates to .Net Framework
> since July, I am almost certain that he will not be the last.

I recently installed McAfee anti virus. Software was for XP 1.1 and Vista.
Whether or not this has anything to do with my problem I don't know.
Microsoft.net Framework 1.1 service pack update downloaded but would not
install.
I am new to technology so would like advice a layman can understand.
I run XP not Vista.
--
new to this technology

"happytales" <happytales@discussions.microsoft.com> wrote in message
news:7D25F146-44D7-47B0-A497-AE02DE946468@microsoft.com...
>I recently installed McAfee anti virus. Software was for XP 1.1 and Vista.
> Whether or not this has anything to do with my problem I don't know.
> Microsoft.net Framework 1.1 service pack update downloaded but would not
> install.
> I am new to technology so would like advice a layman can understand.
> I run XP not Vista.
> --
> new to this technology
>
>
>
When installing MS updates always disable your AV program during
installation if possible. This especially applies to the .Net Framework
runtimes and their respective updates. Run the Belarc Advisor from
http://www.belarc.com to verify if you have all necessary updates installed
since it does get confusing. Also visit MS Update to check for security
updates that may be needed.

The update installed today. I didn't do anything different so this is very
strange.
--
new to this technology


"Allan" wrote:

>
> "happytales" <happytales@discussions.microsoft.com> wrote in message
> news:7D25F146-44D7-47B0-A497-AE02DE946468@microsoft.com...
> >I recently installed McAfee anti virus. Software was for XP 1.1 and Vista.
> > Whether or not this has anything to do with my problem I don't know.
> > Microsoft.net Framework 1.1 service pack update downloaded but would not
> > install.
> > I am new to technology so would like advice a layman can understand.
> > I run XP not Vista.
> > --
> > new to this technology
> >
> >
> >
> When installing MS updates always disable your AV program during
> installation if possible. This especially applies to the .Net Framework
> runtimes and their respective updates. Run the Belarc Advisor from
> http://www.belarc.com to verify if you have all necessary updates installed
> since it does get confusing. Also visit MS Update to check for security
> updates that may be needed.
>
>