ATI X850 display adapter not recognized after Vista installation

Clean installing RTM Full Business on my Asus A8R-MVP. After the
installation is done:
- there is no display adapter in Device Manager
- an unknown device and failing PCI to PCI bridge in Device Manager
- under Display properties the adapter is unknown and the monitor is VGAsave
- The latest ATI drivers and software will not install, probably because
Vista isn't seeing the hardware right.

I dual boot the PC with XP and the hardware works fine there.

So far I've
- clean installed twice
- deleted the unknown and failing devices in Device Manager but they
come back after a reboot.
- Opened tickets with ATI and Asus but haven't gotten anything useful
back yet.


Any other ideas on what might be wrong?

I'm not sure what to tell you. I'm using a Asus A8R32-MVP Deluxe MB with a
Asus X850Pro and Vista Ultimate 64bit with no problems. Booted up fine, and I
was able to install ATI display drivers off the website just fine.

When you boot, is there NO driver, not even a standard VGA, aka, you have no
display output. If so, it could be a problem getting vista onto the Hard
Drive since you should be able to see something. If you can see something,
check out ati.com and download the newest drivers.

As for the other ones, I was just learning the in's and out's of finding out
the devices that are missing drivers in XP. I'm not sure yet as to what are
the two "unknown devices" on my A8R, but I'll get back to you once I know.
I'll bet it's the SIL Raid driver, or the ULi one if you didn't install them.
Realtek also offers a HD driver package that works well for Vista 64/32.
Lastly, what are you using that's integrated.

Hope this helps a little.

"Jerry" wrote:

> Clean installing RTM Full Business on my Asus A8R-MVP. After the
> installation is done:
> - there is no display adapter in Device Manager
> - an unknown device and failing PCI to PCI bridge in Device Manager
> - under Display properties the adapter is unknown and the monitor is VGAsave
> - The latest ATI drivers and software will not install, probably because
> Vista isn't seeing the hardware right.
>
> I dual boot the PC with XP and the hardware works fine there.
>
> So far I've
> - clean installed twice
> - deleted the unknown and failing devices in Device Manager but they
> come back after a reboot.
> - Opened tickets with ATI and Asus but haven't gotten anything useful
> back yet.
>
>
> Any other ideas on what might be wrong?
>

Obviously something is installed since I can see what's going on. But it
says the display driver is unknown and all items on the adapter are
unknown. It is labeled VGASave. The monitor is Default monitor.

I have the latest software from ATI but it is a combo Catalyst software
and drivers. I can't find just the drivers. It does seem to be the
Catalyst software install that's freezing since it's during the
detecting hardware phase.

I'm using the integrated Realtek network (working fine) and the Soundmax
audio (also working fine). I'm not using RAID. I did try to install the
latest ATI drivers (all well before Vista but they wouldn't install.

ProudPilot wrote:
> I'm not sure what to tell you. I'm using a Asus A8R32-MVP Deluxe MB with a
> Asus X850Pro and Vista Ultimate 64bit with no problems. Booted up fine, and I
> was able to install ATI display drivers off the website just fine.
>
> When you boot, is there NO driver, not even a standard VGA, aka, you have no
> display output. If so, it could be a problem getting vista onto the Hard
> Drive since you should be able to see something. If you can see something,
> check out ati.com and download the newest drivers.
>
> As for the other ones, I was just learning the in's and out's of finding out
> the devices that are missing drivers in XP. I'm not sure yet as to what are
> the two "unknown devices" on my A8R, but I'll get back to you once I know.
> I'll bet it's the SIL Raid driver, or the ULi one if you didn't install them.
> Realtek also offers a HD driver package that works well for Vista 64/32.
> Lastly, what are you using that's integrated.
>
> Hope this helps a little.
>
> "Jerry" wrote:
>
>> Clean installing RTM Full Business on my Asus A8R-MVP. After the
>> installation is done:
>> - there is no display adapter in Device Manager
>> - an unknown device and failing PCI to PCI bridge in Device Manager
>> - under Display properties the adapter is unknown and the monitor is VGAsave
>> - The latest ATI drivers and software will not install, probably because
>> Vista isn't seeing the hardware right.
>>
>> I dual boot the PC with XP and the hardware works fine there.
>>
>> So far I've
>> - clean installed twice
>> - deleted the unknown and failing devices in Device Manager but they
>> come back after a reboot.
>> - Opened tickets with ATI and Asus but haven't gotten anything useful
>> back yet.
>>
>>
>> Any other ideas on what might be wrong?
>>

Jerry wrote:
> Obviously something is installed since I can see what's going on. But it
> says the display driver is unknown and all items on the adapter are
> unknown. It is labeled VGASave. The monitor is Default monitor.
>
> I have the latest software from ATI but it is a combo Catalyst software
> and drivers. I can't find just the drivers. It does seem to be the
> Catalyst software install that's freezing since it's during the
> detecting hardware phase.
>
> I'm using the integrated Realtek network (working fine) and the Soundmax
> audio (also working fine). I'm not using RAID. I did try to install the
> latest ATI drivers (all well before Vista but they wouldn't install.
>
I ran all the beta versions with an X800XL, and Vista recognized that
very similar card every time. Before installing the RTM version,
though, I upgraded to an X1950 Pro, and it was UNrecognized, just like
yours. I could hardly believe it, considering how well the betas had
handled ATI cards. I downloaded the Vista-compatible signed Catalyst
(7.1) from ATI and ran its Setup program. After a reboot, Device
Manager showed the display adapter to be a "Radeon X1950 Pro," and the
Vista User-Experience rating for the card rose from 1.0 to 5.9. I had a
nasty time getting my primary and secondary monitors assigned to their
proper roles, but there was no trouble installing the Catalyst Control
Center and driver.
(The CCC requires .NET Framework to be present before it's installed,
and I cannot recall if the proper version is present in Vista by
default. That is, I may have had to fiddle around with .NET prior to
installing the Catalyst, but I've spent so many hours tweaking this
installation over the last 4 days that I cannot recall for sure whether
I did so or not.)

At this point, if the Programs applet in Control Panel shows any ATI
apps or drivers, uninstall them, reboot, and try the Catalyst 7.1 Setup
again.

I've had these same problems with my A8R32-MVP deluxe and Vista Business.
There is no display driver in the device manager and the PCI-to-PCI bridge
associated with the video card is showing error code 12 (not enough resources
to use the device). I tried using my other PCIe slot and the video card came
up with the same error code but the bridge was fixed. I tried to install
ATI's software with the card in both slots. In the top slot the card could
not be detected and in the bottom spot the graphs stuck to 4-bit. I was
suprised at this considering the copy of Ultimate RC2 I had woked perfectly.
I'm using an x1300 by the way. This is something I hope Microsoft will patch
soon.

Yes i did

I tryed catalyst 7.3, ´catalyst 7.2 and the one you can download with
windows update

And i tryed have disk update of the missing secondary .. no luck :(


--
berni2k