Results 1 to 8 of 8

Thread: Fatal System Error when installing Vista with MSI K9NGM motherboar

  1. #1
    Tom Guest

    Fatal System Error when installing Vista with MSI K9NGM motherboar

    I'm attempting to install Wndows Vista RC1 on a system with the following
    hardware:

    Motherboard - MSI K9NGM (NVIDIA MCP51G chipset)
    Bios - AMI 3.10 (latest version)
    CPU - AMD Athlon 64 X2 4200+
    Memory - 2 x 1 Gig Corsair DDR2
    Video Card - NVIDIA GeForce 7300 GT
    Hard Drive - Maxtor 7V250F0 SATA
    DVD Drive - Samsung SH-S182DB

    However, once the installation process gets as far as (c) Microsoft with the
    moving green bar the PC blue screens with the following message:

    STOP: c000021a {Fatal System Error}
    The initial session process or system process terminated unexpectedly with a
    status of 0x00000000 (0xc0000001 0x001003b4).
    The system has been shut down.

    So far I've tried:
    * Clean install with 32-bit Vista
    * Clean install with 64-bit Vista
    * Upgrade from 32-bit XP to 32-bit Vista
    * Disabling all motherboard peripherals except for primary IDE channel (DVD
    drive is on this)
    * Configuring memory as Dual-channel, configuring memory as Single-channel,
    removing 2nd DIMM

    Does anyone have any other suggestions?

    Has anyone managed to install Vista on an MSI K9NGM mother board or on a
    motherboard with an NVIDIA MCP51G chipset?

    Thanks,

    Tom.

  2. #2
    Jdr Guest

    Re: Fatal System Error when installing Vista with MSI K9NGM motherboar

    What OS were you running with this configuration before you've
    tried to install Vista?

    In this case it might be BIOS, as sometimes the latest is not the best...-;)

  3. #3
    DarkDALO Guest

    RE: Fatal System Error when installing Vista with MSI K9NGM motherboar

    I have the same trouble with a similar configuration, same motherboard. So
    it's a motherboard incompatibility issue.

  4. #4
    Tom Guest

    RE: Fatal System Error when installing Vista with MSI K9NGM mother

    I contacted MSI to ask if the motherboard was compatible with Vista, they say:

    Dear Sir,

    Regarding to your concern, this board could support Windows Vista but due
    this OS not release yet so we can't supply such drivers.

  5. #5
    Join Date
    Mar 2007
    Posts
    1
    This might be a bit late for you guy's but this is the link 2 the newest bios release A7252nms.330, It worked a treat 4 me .................

    ftp://ftp.msi.com.tw/BIOS/7252/

  6. #6
    Join Date
    Jan 2008
    Posts
    2

    Vista funciona muy bien con esta placa...

    Try to use LiveUpdate for update the BIOS version, or try this link:
    http://download1.msi.com.tw/files/do...xe/7252v34.zip

  7. #7
    Robyn Guest

    Re: Fatal System Error when installing Vista with MSI K9NGM mother

    I have a msi motherboard, mine supports vista (all versions), I'm sorry I
    seen the model # within those forums you have links too, and seen what the
    model # of the motherboard. That motherboard, not does support vista! My
    advice replace with a newer motherboard perhaps. Hope it all works out!

  8. #8
    Join Date
    Jan 2008
    Posts
    2

    ¡Si lo soporta! ¡Yo lo tengo instalado!

    Watch the README included in the link.
    How are they going to fix an error in Vista, if not does support vista?
    (My BIOS Release is V3.3)


    This is the text included:


    K9NGM (MS-7252) V3.4 BIOS Release
    -------------------------------------------------
    No need to release the BIOS to web site.
    Only release the BIOS for LiveUpdate only because of MAC address will be erase.
    -------------------------------------------------
    1. This is AMI BIOS release
    2. This BIOS fixes the following problem of the previous version:
    - Update CPU ID.
    - Fixed PS2 mouse cannot work after resume from S3 under Vista.
    - Fixed system cannot use 1G * 2 pcs memory.
    3. 2007/05/18

Similar Threads

  1. Fatal error while installing Officejet pro 8500
    By CollinsK in forum Hardware Peripherals
    Replies: 4
    Last Post: 08-05-2012, 01:43 PM
  2. Replies: 5
    Last Post: 19-03-2012, 09:48 AM
  3. Replies: 9
    Last Post: 04-01-2012, 08:53 AM
  4. Getting fatal error while installing HP PSC 1410 printer
    By EveryWer in forum Hardware Peripherals
    Replies: 7
    Last Post: 26-11-2011, 06:56 AM
  5. Replies: 4
    Last Post: 25-05-2009, 11:35 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,711,638,943.03739 seconds with 17 queries