After installing b. 5744 I found that Vista does not restart or shutdown
properly. It just "hangs" and I would have to manually surpress the reset
button on my computer to restart or power button to shutdown.
Anyone have any answers?
After installing b. 5744 I found that Vista does not restart or shutdown
properly. It just "hangs" and I would have to manually surpress the reset
button on my computer to restart or power button to shutdown.
Anyone have any answers?
Can you give us your system specs please?
regards
Robert
"ton62" <ton62@discussions.microsoft.com> wrote in message
news:239AB770-F2A9-4C37-B50E-F5A69AEBEA18@microsoft.com...
> After installing b. 5744 I found that Vista does not restart or shutdown
> properly. It just "hangs" and I would have to manually surpress the reset
> button on my computer to restart or power button to shutdown.
>
> Anyone have any answers?
I don't have any answers for you, but I am having the same problem. Vista
(5600, and 5728) used to shut down or restart in just a few seconds, but now
(5744) it just shuts the screen off and hangs. But even that takes a while.
Mine started doing it during the upgrade somewhere near the end. Did yours
do that too? Just curious.
"ton62" wrote:
> After installing b. 5744 I found that Vista does not restart or shutdown
> properly. It just "hangs" and I would have to manually surpress the reset
> button on my computer to restart or power button to shutdown.
>
> Anyone have any answers?
Hi ton62,
I had same problem but some super soul found the answer already perhaps it
is your answer, go to
http://windowshelp.microsoft.com/com...sloc=en-us&p=1
ACPI x86, AMD Athlon 64 FX-53 processor, ST3160023AS ST3160023AS SCSI Disk
Device, Nvidia GeForce 6800 Ultra, Creative SB Audigy 2 ZS, Microsoft iSCSI
Initiator, VIA VT 8237 Raid Controller, 2 GB Ram, 160 GB disk space.
"b" wrote:
> Can you give us your system specs please?
>
> regards
> Robert
> "ton62" <ton62@discussions.microsoft.com> wrote in message
> news:239AB770-F2A9-4C37-B50E-F5A69AEBEA18@microsoft.com...
> > After installing b. 5744 I found that Vista does not restart or shutdown
> > properly. It just "hangs" and I would have to manually surpress the reset
> > button on my computer to restart or power button to shutdown.
> >
> > Anyone have any answers?
>
>
>
Yeah, mine did the same. After I took the cd out and thought it would reboot
on it's own but it didn't.
Stephen might have an answer for you but it didn't help me.
"MrC" wrote:
> I don't have any answers for you, but I am having the same problem. Vista
> (5600, and 5728) used to shut down or restart in just a few seconds, but now
> (5744) it just shuts the screen off and hangs. But even that takes a while.
>
> Mine started doing it during the upgrade somewhere near the end. Did yours
> do that too? Just curious.
>
> "ton62" wrote:
>
> > After installing b. 5744 I found that Vista does not restart or shutdown
> > properly. It just "hangs" and I would have to manually surpress the reset
> > button on my computer to restart or power button to shutdown.
> >
> > Anyone have any answers?
Please download the Microsoft Beta Client and report this to Microsoft
directly. More than likely it is a driver issue. However try to go into the
control panel (classic mode) and choose power options and choose the high
performance option and then try again to shutdown.
regards
Robert
"ton62" <ton62@discussions.microsoft.com> wrote in message
news:C9CF9A02-4DEF-4C31-9960-91479A5E7A93@microsoft.com...
> ACPI x86, AMD Athlon 64 FX-53 processor, ST3160023AS ST3160023AS SCSI Disk
> Device, Nvidia GeForce 6800 Ultra, Creative SB Audigy 2 ZS, Microsoft
> iSCSI
> Initiator, VIA VT 8237 Raid Controller, 2 GB Ram, 160 GB disk space.
>
> "b" wrote:
>
>> Can you give us your system specs please?
>>
>> regards
>> Robert
>> "ton62" <ton62@discussions.microsoft.com> wrote in message
>> news:239AB770-F2A9-4C37-B50E-F5A69AEBEA18@microsoft.com...
>> > After installing b. 5744 I found that Vista does not restart or
>> > shutdown
>> > properly. It just "hangs" and I would have to manually surpress the
>> > reset
>> > button on my computer to restart or power button to shutdown.
>> >
>> > Anyone have any answers?
>>
>>
>>
I have the same problem; I have the nforce3-a939 motherboard but it does not
use the via raid controller. So I guess I'm still stuck there.
Thank you for your time.
I have this problem too. Sleep, hibernate, shutdown, restart, nothing works.
Monitor will go off, USB ports will power down but nothing else. I have to
do a hard power down to get it to shut off.
Specs:
I'm running an ABIT NI8-SLi board with a GEFORCE 7600GS card. I have a
Pentium D dual core processor (overclocked) and 2 gigs of OCZ 5400 ram. In
Windows XP I can shutdown fine. FYI, when the problem started I was using
an old Nvidia device driver that was compatable with Vista RC1. I've since
uninstalled and deleted that driver.
"Karel Paborsky" wrote:
> I have the same problem; I have the nforce3-a939 motherboard but it does not
> use the via raid controller. So I guess I'm still stuck there.
>
> Thank you for your time.
I also have this problem on a machine that previously used XP. This has happened recently (a week or so). Have MS released a patch? I have auto update switched on (maybe a mistake in vista!)
The power down problems started earlier than this but, I did receive a notification on the last auto update that my copy of windows is not genuine or has been hijacked! Every re-validation failed. Re-booted and all was ok?
Specs:
I'm on an Asrock 775VSTA board with 2Gb ddr2 single 300 GB sata drive and an E6300 cpu
Same problem....
I got a vista 32bit upgrade and tried to install on my PC, this didn't work as i had an nVidia 8600GT which has driver problems. So i got a nVidida 9800GT and it installed fine....ish. It kept freezing not long after i started it and i would have to re-set. I fixed that problem by installing new motherboard drivers and now i trying to fix restart/shutdown problem.
I have a gigabyte P35-DS3R motherboard, an Intel Quad CPU Q6600, 4.25 gb DDR2 RAM, and a brand new nVidia 9800GT, 80gb SATA hard drive.
Stephen posted a link but i think thats for AMD processors because when i ran the setup is says cannot find hardware.
Appreciate any help.
Bookmarks