Go Back   TechArena Community > Technical Support > Computer Help > Windows Vista > Vista Help
Become a Member!
Forgot your username/password?
Register Tags Active Topics RSS Search Mark Forums Read

Sponsored Links



How I fixed my Vista Print Spooler Problems

Vista Help


Reply
 
Thread Tools Search this Thread
  #1  
Old 20-10-2008
perrylea@cableone.net
 
Posts: n/a
How I fixed my Vista Print Spooler Problems

I have been a long time user of Windows XP SP2. I had recently
putchased Vista Ultimate with the intent to upgrade my XP system.

The principal problem was all attempts to add a printer resulted in
errors stemming from the Print Spooler Service.

Before I begin let me preface my environment:

Intel 2.8 GHz machine with 2 GB RAM and ATI 1300 video. XP SP2 as I
mentioned.
I have used over the years the following imaging devices:

a. HP Color LaserJet 4650
b. HP 8150 AIO Injet/Scanner/Fax
c. HP 9100 Digital sender

I should note that the digital sender has long since been removed.
The 8150 is seldom used. Both of these devices had left a long
residue of drivers and services on my XP box. The Laserjet only used
a PCL6 driver.


------ The Vista Experience ---------
Now begins my 14 hours of debug joy. The Vista install went fairly
smoothly. The Windows Compatibility check noted some issues with
Symmantec AntiVirus, ATI veido, Sigmatel Audio, Windows MGR 5.1, and
the Common Client. Nothing seemed out of hte ordinary so I went
with an upgrade install of Vista Ultimate.

The installation took about 3 hours.

When complete I verified that video, networking, my critical
applications, and device worked. Most did, except for the DVD drive.
There is a BLOG dedicated to that issue.

The main problem was trying to add a printer.

All attempts to add a printer resulted in a pop up showing:
"windows can't open add printer. the local print spooler is not
running"

If I manually restarted the Print Spooler service and quickly add a
printer in the Control Panel dialogue I got a different error:
"0x000006be error"

So began the Google searches for help.

1. I attempted to restart the spooler services as noted on many blogs:

1. I attempted to manually clean all my drivers and registry changes
as noted here:
http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm
This did not help

2. I traversed HP's site and found this tidbit:
http://h10025.www1.hp.com/ewfrf/wc/d...reg_R1002_USEN

No luck yet.

3. I traversed MS support and found this KB:
http://support.microsoft.com/kb/324757
I did go to C:/windows/system32/spool/

I deleted all drivers - residue from the XP builds.

The PRINTERS directory was empty (obviously no prointers were every
installed)

I deleted all printprocs.


Many blogs indicated this successfully worked for different users.

However, this did not resolve the problem.

4. I reinstalled Vista
No luck there either

5. I tried installing a Vista CD installation of the Laserjet 4700
thinking a full Cd isntall might work :

No luck

6. I tried downloading the PrintFlush-1.3 utility to clean the Spooler
settings and queues.
No luck

7. I downloaded the Print Spooler Fix wizard. While this didn't work
it did clue me into some registry settings that were dangling. I
deleted them.
Still no luck

8. Finally I went to C:/windows/system32 and added columns to the
directory listing to indicate company names. I deleted all HP drivers
I could find. I have to say the HP AIO 8150 left a shotgun of driver
residue.

----------------------------------------- The fix
--------------------------------
Now begins some deeper debugging and resolution.

As you see I have stripped my registry settings, drivers, monitors,
and whatnot. You can assume I have no print drivers at this point.

1. I went to Device Manager and reviewed the logs. Under Event Views -
> Windows Logs -> Application. I noticed failures related to the

spooler as:

"The print spooler cannot start because the PrinterBusEnumerator could
not start. Error code 0x80070006. This can occur because of system
instability or a lack of system resources."

2. I searched Google and found a relationship between
PrinterBusEnumerator and the UMBus (User Mode Bus).

3. I went to Device Manager again and clicked on View -> Show Hidden
Devices. Selected System Devices. And Uninstalled both the UMBus
Enumerator as well as teh UMBus Root Bus Enumerator.

4. Rebooted.

5. Went to Control Panel. Selected Add Hardware.

6. Selected Install the Hardware Manually.

7. Clicked on the first selection: "Show All Devices"

8. Added back bot the Microsoft UMBus Enumerator and the UMBus Root
Bus Enumerator.

9. Rebooted.

10. Went to add printer. And could then add back my Color Laserjet
4600.

11. Printed a test page and application document as a test.


Hope that might help someone in the future.

Reply With Quote
  #2  
Old 15-02-2009
MrsManolo
 
Posts: n/a
RE: How I fixed my Vista Print Spooler Problems

Many thanks for a detailed clear explanation. I am trying to solve "Spooler
Subsystem App problems reinstalling Lexmark". Can you look at my post and
suggest any ideas? I have done up to your step 3. Am thinking of completely
going back to factory setup of Vista computer but this will be painful and
timeconsuming and I'm scared it might not solve the problem. How did you do
the Event Views? How did you find the PrintFlush utility and Print Spooler
Fix Wizard?
Reply With Quote
  #3  
Old 17-03-2009
Member
 
Join Date: Mar 2009
Posts: 1
Re: How I fixed my Vista Print Spooler Problems

Something else that may help is the Print Spool Repair Utility from
It's designed to take care of your spool jam problem fast and with just a few easy clicks of your mouse! There's nothing to install and nothing to edit! Anyone can use this powerful utility without any real knowledge of printers or computers, however computer technicians love our Printer Problem Solver on-site wherever they go because it can run directly from a usb drive! It's that portable! No complicated or messy installations required! It's small, powerful, easy to use and it works in SECONDS! Don't pay $34.99 or more for out-of-warranty overseas technical support EVERY TIME it happens! It even works with Lexmark printers! Try out the demo today!
Reply With Quote
  #4  
Old 20-06-2009
Media Guy
 
Posts: n/a
RE: How I fixed my Vista Print Spooler Problems

Thank you for your excellent post. I have been fighting with this printer
installation problem for two days. I am a very experienced PC user but this
new Vista thing is making me crazy. Your fix worked and has certainly saved
me more frustration!
Thanks Again!
Reply With Quote
  #5  
Old 22-09-2009
Anddy
 
Posts: n/a
Re: How I fixed my Vista Print Spooler Problems

:p Hi folks, hello to you all . I have had print spool problems on my
packard bell ixtreme x6618 vista 64bit. It started with my printer
about a week ago i had a Lexmark P6350 all in one then it stopped
working, the error came up print spool error. I tried different things
to fix the problem thinking it was the drivers i uninstalled them and
then installed the most up to date one. No use i thought the printer
had snuffed it. I ordered a new Lexmark X5075 all in one arrived today
and it worked for two pages then the same error came up so i clicked
control panel and looked at printer it also stated that there was
another printer called: Microsoft xps Document Writer. I took a chance
and deleted this off as i do not use it and hey presto my new printer
works perfectly. I have tried printing from different sites ,and off the
internet and all print great now, office 2007, emails, also work ok. I
do not have a lot of knowledge about computers but if this helps
somebody out. It worked for me. P.S. I did not see this : Microsoft xps
document writer : in my printers before it must have been in something
that i downloaded or was updated about a week ago. Have a nice day.
Anddy.
Reply With Quote
  #6  
Old 27-09-2009
bundee
 
Posts: n/a
Re: How I fixed my Vista Print Spooler Problems

you can try this blog:

http://bundee-caloyski.blogspot.com

there's an article there about printer communication error.
there's a step there that would ask you to rename the w32x86 folder.
that step would help you in the spooler issue that your having.
Reply With Quote
Reply

  TechArena Community > Technical Support > Computer Help > Windows Vista > Vista Help
Tags: , , ,



Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads for: "How I fixed my Vista Print Spooler Problems"
Thread Thread Starter Forum Replies Last Post
Print Spooler Errors/Problems-You Wont BELIEVE The Cause Eun Mi Windows XP Support 12 04-05-2012 12:03 AM
Print spooler problems in installing a HP Officejet J4580 Jen03 Windows XP Support 1 13-05-2011 06:35 AM
Problems with Print Spooler in Windows7 geoff1 Hardware Peripherals 1 01-03-2011 10:13 PM
Print Spooler related problems in Windows 7 chyarte Hardware Peripherals 5 09-12-2010 11:04 PM
Windows vista print spooler problem. Mr. raspy Vista Help 22 07-07-2009 11:47 PM


All times are GMT +5.5. The time now is 08:19 PM.