Silicon Image sill 0680 ultra-133 medley ata raid controller [driver] for Vista

[Kooldinesh]

I have installed Windows Vista in my computer and I am looking for a Silicon Image sill 0680 ultra-133 medley ata raid controller driver that will work on this operating system. I have tried searching for same from different websites but am unable to find it it anywhere. If someone has some information about the driver, then please let me know. Thanks.

[MrChris-]

I think that you can download the SiI0680/0680A 32-bit Windows BASE Driver, that will easily work on Vista, from this link - http://www.siliconimage.com/support/...3&ctid=2&os=4&[%2f
And if you want 64 bit drivers for Vista of this controller then download it from this link - http://www.siliconimage.com/support/...ctid=2&osid=8&
I am using this same driver on my machine from many months and it is working fine on my machine without any issues.

[Lillebror]

You could try pressing F6 at the start of the Windows Vista setup and supply the Sil0860 driver. If that doesnt work then try to repair the system from the dvd and install the Sil driver afterwards. You can even try to update the IDE card Bios under Vista, which will fix the issue. Also, there is a Medley v1.2.0.5 will also work on Bot 32bit and 64bit version of Vista OS.

[Glenny]

I was wondering if there is any Bios for this card that can detect the jumper of the hard drive? I have already checked out the BIOS 3.2.00 Raid and Bios 3.400 Non-Raid versions, but nothing makes any changes in the operating even when the jumper setting is changed. The Raid setup menu is also coded with the non-Raid Bioses.