Nyko Wireless Controller for playstation 2

[Mario2]

Sponsored Links

how to hook up nyko wireless controllers for playstation 2 ? i have just got this control and cant get to run in my PS2 done many searches but no result .
Thanks for help .

[Hitman22]

install the joystick?
Simply remove the rubber stop in the middle of the D-Pad, and screw the arcade stick in to the D-Pad.

If your controller not turn on Check to make sure your batteries are inserted properly and are not depleted.

[Mario2]

If you connect the Controller to PS2 and it does not work then try the following :

Make sure the controller and receiver are set to the same channel. ·Try selecting a different channel on the controller and receiver. · Reset the receiver by unplugging it; then plug it back into the console. · Verify that the batteries are inserted in the proper orientation. · Test the batteries to determine if they have sufficient charge. · Ensure that the receiver is fully inserted into the controller port. · Make sure the green LED above the POWER button is on. · Restart the PlayStation console. · Your controller may be in Sleep Mode (caused by more than 1 minute without a console signal or more than 3 minutes of controller inactivity). Restart it.

[Hitman22]

Nyko's Wireless Air Flo for Sony Playstation 2 controller features RF wireless technology for play at up to 50 feet. The new controller includes multi-channel design for imultaneous use of up to 8 controllers and precision error correction to eliminate interference from household electronics. Gamers can enjoy up to 110 hours of wireless game play when not using the Air Flo feature or more than 50 hours of game play while using the maximum level of Air Flo. The automatic power save mode ensures that there is no battery drain when the controller is not in use.