I know that most of you people looking forward to refill your ink cartridges because it is very expensive to get the new one every time for a personal user. But we can refill the ink in an easy method. If the printer or the software will warn that ink is low, cancel printing. Reservation prevents the ink from clogging the nozzles with ink residue that may have the cartridge. Now is the right time to make the cartridge refill your HP!! We need a disposable syringe and ink
- Load the syringe with ink inserted into the hole for the cartridge has a default.
- 6-introduces the injection with an inclination of 45 degrees, i.e. inclination, because it can pierce the filter having the cartridge, and prevents clogging of the nozzles.
- Avoid overfilling or dump, because the excess ink can cause in the process of printing, the ink spilled on sensitive circuits and components in the carriage and rollers.
- Clean the cartridge print nozzles, with paper towels, paper towels or type toilet paper.
- Remove any residue on the cartridge or printing system.
- In the cartridge tricolor, remove the plastic top and IDENTIFY EACH hole color.
- Clean the cartridge contacts to avoid short circuiting and burning cartridges.
- Replace the cartridge into the printer and perform a test print.
- Align the cartridges print the proof sheet according to instructions.
Note that the software cannot tell you the status of the refilled cartridge and bring up a question mark which would indicate the level of this ink not prevent normal printing.
Bookmarks