All Chinese mobile phone Secret Codes

[jackalz]

Sponsored Links

*#66*# Set Factory Mode CONFIRMED
*#8375# Show Software Version CONFIRMED
*#1234# A2DP ACP Mode CONFIRMED
*#1234# A2DP INT Mode CONFIRMED
*#0000# + Send : Set Default Language CONFIRMED
*#0007# + Send : Set Language to Russian CONFIRMED
*#0033# + Send : Set Language to French CONFIRMED
*#0034# + Send : Set Language to Spanish CONFIRMED
*#0039# + Send : Set Language to Italian CONFIRMED
*#0044# + Send : Set Language to English CONFIRMED
*#0049# + Send : Set Language to German CONFIRMED
*#0066# + Send : Set Language to Thai CONFIRMED
*#0084# + Send : Set Language to Vietnamese CONFIRMED
*#0966# + Send : Set Language to Arabic CONFIRMED
*#800# make Etel E10 model displaying message BT power on. But on display it dont resemble the blutooth power on icon.(actually t makes BT stuck, but after restarting t becomes normal <tested by me>)

More codes to reset chinese mobile phone
*#77218114#
*#881188#
*#94267357#
*#9426*357#
*#19912006#
*#118811#
*#3646633#

also found these

Service codes Konka:
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send

Service codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#

ZTE Mobile:>1- *938*737381#
2- PHONE WILL DIPLAYED DONE
3- POWER OFF YOUR PHONE AND POWER ON AGAIN
alcatel:>E205
unlocking phone code,only press***847# without simcard
E900 software version: *#5002*8376263#
E900 full reset: *2767*3855#

Service codes Spice:
S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
S410 engineer mode: *#3646633#
S900 software version: *#8375#
S900 serial no: *#33778#

Service codes Philips:
S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200

Service codes "Chinese" models:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#

Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#

Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#

Service codes VK-Mobile **x, 5xx:
software version: *#79#
software version: *#837#
service menu: *#85*364# (hold #)

Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)

Service codes LG:
software version: 2945#*#
KG300 NVRAM format: 2945#*# -> menu 15

Service codes Sony-Ericsson:
J100 software version: #82#

Service codes Fly:
M100 software version: ####0000#
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#

Service codes Konka:
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send

Service codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#

Service codes Motofone-F3:
Motofone F3 software version: **9999* Send
***300* Set SIM Pin
***310* / ***311* SIM Pin ON | OFF
***000* Reset Factory settings
***644* Set Voicemail number
***260* / ***261* Auto keypad lock ON | OFF
***510* / ***511* Voice Prompts ON | OFF
***160* / ***161* Restricted Calling (Phonebook only) ON | OFF
***200608* Send: software version
***200606* Send: software version
***200806* Send: flex version
***250* / ***251* Keypad tones ON | OFF
***470* Select time format
***500* /***501* Prepaid Balance Display ON | OFF
***520* Change language

Service codes Motorola:
C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
C138, C139, C140 software version: #02#*
C155, C156, C157 software version: #02#*
C257, C261 software version: #02#*
V171, V172, V173 software version: #02#*
V175, V176, V176 software version: #02#*
C168, W220 software version: *#**837#
W208, W375 software version: #02#*
and "yes"''

I-mobile Inno30, 55, 89, 90, 99, 100, A10, A20, P10, Vk200
- Set full factory *741*737381#
- Set full factory *741*7373868#
- Set full factory *741*2878#
- Set Engineer Mode *888*888#
- Check software version *888*837#

I-mobile 100 ,200 , 313
- Check software version #*888#

I-mobile 309, 310
- Check software version *0*4636#
- Test Mode *0*6268#

I-mobile 311
- Check software version #*878#

I-mobile 511
- Check software version *1222*1#

I-mobile 301, 302,308, 508, 601, 602, 603, 604, 606, 611, 901, 902
- Check software version *#159#
- Set Factory Mode *#32787#
- Set Engineer Mode *#3646633#

I-mobile 503, 506, 605, 600, 607, 608
- Set Engineer Mode ***503#
- Set Factory Mode ***504#
- Set Auto Test ***505#

I-mobile 509, 612
- Set Factory Mode *#66*#

I-mobile 504, 505, 803
- Check software version *68*48#
- Set full factory *789#
- Test Mode *#789#

I-mobile 305, 306, 315, 510, 609, 609i,516
- Check software version *#8375#
- Set Factory Mode 878

I-mobile 610
- Check software version *#22#

I-mobile J101, J102
- Test Mode *23638777*783781#

I-mobile 502, 502i, 505, k9, 802
- Check software version *201206*4636#

i had china mobile & is a copy of HTC touch diamond dual sim P3700 it is not supporting all secret codes.if else any plz. disply

Thanks for the support, I need all the Chinese mobile software.
I'm in Caracas, Venezuela and get us.

[Kingomar]

non of this code is working in my chinese mobile gfive g9000i.

[SpearMan]

I am also trying to search for the same mobile codes. I also have a G Five G9000i phone. I am looking for factory reset code. But the issue with this Chinese phones is that first it is hard to find their pc suit as they do not have any official site and second there are no drivers for the same. I try some the above codes but none of them worked here.

[abul2006]

many thanks for your nice share

[monu_udr]

Hello Brother

I've china Gild mobile like nokia e71 when i was go to sarvice menu and go to power sim option
& SWITCH ON the option


MY MOBILE WAS SWITCHED OFF!!! I TRYING MANY TIMES BUT THERE ARE NOTHING

PLZZ GV ME REPLY WHAT I CAN DO FOR ON THE MOBILE

THANKS IN ADVANCE
MY NO IS 08880038150

[Computer_Freak]

Try to remove the battery and sim card and leave the phone back for some while. Then put it back and then try to switch the phone on. I am not sure about the factory settings keys which usually most of the mobile have. But there are no exact information available on China phone. Just remove the battery and then check back.

[tyressee]

hi, i tried the factory reset it actually work, but now every thing is in Chinese, and i dont know how to insert the * and the # symbols to set it back to english, am using a n9, can someone please help me

[mrcjnraj]

For GFIVE G3000 mobiles working codes.
*#0044# + Send : Set Language to English CONFIRMED
*#1234# A2DP ACP Mode CONFIRMED
*#1234# A2DP INT Mode CONFIRMED
Please help me. I am able to acess phone drives only.not able to connect to internet using usb. com port through usb. any one having idea to connect.

[Bon-Z]

Originally Posted by mrcjnraj

For GFIVE G3000 mobiles working codes.
*#0044# + Send : Set Language to English CONFIRMED
*#1234# A2DP ACP Mode CONFIRMED
*#1234# A2DP INT Mode CONFIRMED
Please help me. I am able to acess phone drives only.not able to connect to internet using usb. com port through usb. any one having idea to connect.

You need to download and install the drivers of your china mobile phone in your pc for internet purpose and only then it will show/list up in your computer. Have you tried installing china mobile phone pc suite in your computer? There is a guide on connecting to internet via the china mobile phone in pc that you can try yourself and check whether it works for you - Install China Mobile Phone Modem Driver and Connect to Internet on PC

[mrcjnraj]

As soon as I connected the phone, there is two options in the phone.
1. mass storage
2. Webcam
It will work well as mass storage device and web cam. The problem is not as modem. I think some more configuration like com port will be there.
In phone it was not found. Also I am not able to modify Wap and gprs settings in the phone. All settings are already configured in the phone.
So if i use Airtel Its not possible to browse in phone. if i use vodafone, then I can browse in phone but not in system.Through bluetooth i can browse in computer. Blutooth modem is working fine.
The problem is Usb cable and driver. When I connected through USB , the system detected as Mass storage device, and web cam based on the option selected. But not as modem. I tried all possible ways.
Finally, I came to conclusion that there will be a com port option in phone, I need to activate this. But how to activate is not known to me. If there is any code please tell me...

[AyaDream]

Can someone please explain service code "Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200 " for chinese copy mobiles

[kanjiwani_k]

i have s520 china mobile in it i hace forgot my phone lock password so how can i open it does nay body know so plz help me

[Shikhar]

Originally Posted by kanjiwani_k

i have s520 china mobile in it i hace forgot my phone lock password so how can i open it does nay body know so plz help me

You will need to perform a hard reset to get pass off of that lock password. To do so, try any of these codes:
*#77218114#
*#881188#
*#94267357#
*#9426*357#
*#19912006#
*#118811#
*#3646633#

[EWakshay15]

What is the secret code for China G'Five U888?