CDMA And GSM Secrets Codes

**Icarusul** · 27-08-2008

CDMA SECRET CODES

<<SAMSUNG>>

Samsung sph-n240, n400, a460, a500, etc
Nam Programming :
Nam Set: ##Spc
Test Mode: 47*869#1235
Debug Menu: ##33284,ok
Service Menu: Menu+8+0 (#889)
Reset (Life time, Clear Memory, etc): ##786,ok
A-key: ##2539,ok
Label Selection: ##3882,ok
Label(Home, Work, etc) : **523,ok
NGG Setting (Gateway, etc.): ##2769737,ok
Vocoder: ##8626337,ok
CAI Change: ##7738,ok
Enable TTY: ##889,ok

Samsung sch-411, 611, n105, a100, a300, a2000, etc
Nam Programming :
Nam Set: 47*869#08#9
Nam Set: Menu+60
Test Mode: *759#813580
Test Mode: 5809540*45680
A-key: Menu+0, 25##
External Audio: Menu+0, ####
Debug Menu: Menu+8, 0415 or Spc
Debug Menu: Menu+9, 0415 or Spc
Brief NAM Programing: Menu+40,626 (not all version)
LCD Contrast: Menu+45 (not all version)
SIO Mode: Menu+49
SIO Mode: Menu+69

Samsung a300, a530, a610, a620, a660, a670, etc
Nam Programming :
Nam Set: Menu, 6, *
Nam Set: ##3238, ok
Nam Set: ##SPC (##000000), ok
Service Menu: Menu, 9, *
Test Mode: 47*68#13580
Test Mode: 47*869#1235

Samsung X, E, V, S-series (korean), e250, v420, s250, etc
Nam Programming :
Nam Set: 6548#0**4#6
Nam Set: 47*869#08#9
Nam Set: 74153697193
Test Mode: 5809540*45680 (88 - efs clear)
Debug Menu: Menu(hold 2sec)+0, 6725 or 9720 or 1973 or 0415
Debug Menu: Menu+0(hold 2sec), 6725 or 9720 or 1973 or 0415
Samsung N356 (India version)
Nam Programming :
Test Mode: Menu, 5, down arrow, *
Test Mode: **00## (in some flashes)
Samsung i700, etc Nam Programming :
Nam Set: Go to start and select "PHONE" from the drop down menu, dial #83587
Samsung i300, etc Nam Programming :
1. Tap on the Phone Icon with stylus
2. Press #907*9#0 ENTER LOCK should appear on screen
3. Enter OTKSL
4. SVC MENU will appear press 1
5. Enter 10 digit MIN and then press SAVE
6. Press SAVE again
7. Press 3 and then press SAVE 6 times
8. Enter the HOME SID and press SAVE once
9. Press END key twice

<<KYOCERA>>

Qualcomm qcp-800
Nam Pogramming :
Nam Set: Menu+3+0+Spc
Field Test: Menu+7+0+Fsc
Kyocera 1135, 2255, 3035, 5135, 6035, Se47, etc Nam Programming :
Nam Set: 111111+Jog Dial(Ok), Select "Programming"+Spc
CAI Change: ##7738,ok
Enable TTY: ##889,ok
Life Timer, PRL, etc: ##786,ok
A-key: ##2539,ok
A-key: 2539,ok
Tips:
On some kyocera handsets the factory service module has not been disabled
and the phone can be programmed without the spc by inputting.
Nam Set: ##333333 menu (service)
<<SANYO>>
Sanyo 4900, 5150, 5300, 8100, etc
Nam Programming :
Nam Set: ##Spc+Ok+Key Down+Ok
Advanced Setup: ##3282+Ok+Key Down+Ok+Msl
A-key: ##2539+Ok+Key Down+Ok
Version: ##**837+Ok+Key Down+Ok
Debug Menu: ##FSC+Ok+Key Down+Ok
Airtime menu: ##8463+Ok+Key Down+Ok
Change CAI: ##7738+Ok+Key Down+Ok
Vocoder: ##8626337+Ok+Key Down+Ok
Reverse Logistic: ##786+Ok+Key Down+Ok
Set IP Address: ##2769737+Ok+Key Down+Ok
TTY On/Off: ##889+Ok+Key Down+Ok
Ready Link: ##4636+Ok+Key Down+Ok
Browser Init On/Off: ##4682+Ok+Key Down+Ok
Picture Token: ##25327+Ok+Key Down+Ok
Unknown Code: ##5282277+Ok+Key Down+Ok
(SPC=000000, FSC=040793)
Sanyo scp-A011, smp-A017, etc
Nam Programming :
Nam Set: F9(3 beep) + 0*72696#767

<<NOKIA>>

Nokia 3280, 3285, 3580, 3585, 5185, 6185, 8280, etc Nam Programming :
Nam Set: *3001#12345#
Software Version: *#837#
Software Version: *#9999#
Esn Number: *#92772689#
Restart Phone: *#75681#
Restart Phone: *#75682#
Nokia 8887 Nam Programming :
Nam Set: *3001#12345#
Version: *#0000#
Evrc: *#8378#
Esn/Data/Timer: *#92772689#
SID: *#743#
Nokia 8587 Nam Programming :
Nam Set: *#626#7764726#
A-Key: #8159357022#4579# (26 digits)
A-Key: #8159357022#4547# (20 digits)
Version: *#0000#
Version: *#837#
Vocoder: *#3872#
Change language: Menu 5, 3, 1
Change DM mode: *#7678#
Debug Screen: *#8378#
Debug: *#8380#
Field Test Menu: *#83788#
SPC Unlock, Factory Reset :
Full Factory Reset: *#7370#
Resets all settings including non-user changeable items (like SPC)
NOKIA TEST MODE:
51xx, 61xx, 71xx, 3285, 63xx, etc :
1) Turn on the phone. Press *3001#12345#
2) Scroll up to where it says "Field Test" and choose SELECT
3) Highlight "Enable" and choose OK. Turn the phone off then back on.
4) If the test mode screen does not show up press MENU and scroll
down to "Field Test" choose SELECT. Press 0 1 then choose OK.
5) Lower left or upper left number is the signal strength.
6) To turn off the test mode press MENU and scroll down to where it says
"Field Test" choose SELECT. Press 0 0 and then choose OK.
3360, 6360 :
1) Turn on the phone. Press *3001#12345#
2) Scroll up to where it says "Field Test" and choose SELECT
3) Highlight "Enable" and choose OK. Turn the phone off then back on.
4) If the test mode screen does not show up press MENU and scroll
down to "Field Test" choose SELECT. Press 2 1 0 1 then choose OK.
5) Lower left or upper left number is the signal strength.
6) To turn off the test mode press MENU and scroll down to where it says
"Field Test" choose SELECT. Press 2 1 0 0 and then choose OK.

<<AUDIOVOX>>

Audiovox 4000, 9000, 9100, 9155, 9500, etc Nam Programming :
(Power the phone on and wait until the little light on top goes out)
Nam Set: 289+fcn+#+1
Service menu: fcn+00+fsc(000000)
Test Mode: Hold (2,*,Rcl)+Power
Test Mode Commands:
99 - download - flash phone
124 - inam data write
125 - version
126 - esn read
127 - sec_code
128 - lock_code
129 - is WFTV data write
137 - FSC code
138 - NPcode (nam program code)
139 - dscode
141 - restart
218 - Read_Addr
000 - is cdma mode
001 - is fm mode
002 - is pcs mode
008 - is reg read addr
020 - is lna_range
Audiovox pcx-3500xl
Nam Programming :
Nam Set: ##2726+Send+1998+1+Spc+1
Audiovox cdm-100, 130, 135, 8300, 8500, 8600, etc Nam Programming :
Nam Set: ##20022002+Pwr+1+Spc
Audiovox 8610, 8910, etc N
am programming :
Name Set: ##847446, end, 111111
Audiovox-107
Nam Programming :
Nam Set: 45680*47*869#1
Audiovox CMP-3
Nam Programming :
Nam Set: 45680*47*869#1
Dm Mode: Menu, 6, 6
Audiovox 9950
Nam Programming :
Nam Set: ##3282
Audiovox Z800 (Audiovox 7900, Sharp)
Nam Programming :
Nam Set: m + # + envelope key + * + 1
Audiovox Thera (Toshiba 2032)
Nam Programming :
AUDIOVOX TEST MODE :
9100, 9155:
1) Turn on the phone. As soon the phone comes on and the green light
turns off press RIGHTARROW, 0, 0. The phone will ask for the
"FSC Code", press 000000 then choose OK and press RIGHTARROW,
RIGHTARROW. Your phone is now in test mode.
2) The signal strength is the number on the top right hand side of the screen.
3) To turn off test mode shut of the phone and then turn it back on.

<<MOTOROLA>>

Motorola 7760, 7860, 2260, 8160, etc
Nam Programming :
Nam Set: Fcn,0000000000000, Rcl
Nam Set: 7466 3 #, Fcn, Fcn
Test Mode: Fcn, 00**83786633, Sto

Motorola v60c, v120c etc
Nam Programming :
Nam Set: 74663#, Menu, Menu, Spc
Nam Set: Menu, 073887, * (type quickly)
Test Mode: Menu, 073887*, Spc
Debug Mode: ##33284
Force the phone into DIGITAL ONLY mode:
1) ##33284 (Debug)
2) RIGHT Softkey (Next) Twice
3) Down arrow 10 times to "PrefMod"
4) RIGHT Softkey (Change) until you see "DigOnly"
5) LEFT softkey (Exit)
6) MENU then LEFT Softkey return to idle screen
7) ##33284 (The last 4 will not display if you have done it correctly)

Motorola t182, c210, etc
Nam Programming :
Nam Set: ##1111 end
Nam Set: ##298645665 end
Short Nam: ##073887 sto

Motorola v710, v730, v740, ms150, etc
Nam Programming :
Nam Set: 8378*# + press 3 times NATE (spc - 071082)
Test Mode: Menu, 073887*, Spc
Service Menu: #758353266#646#

Motorola StarTac 2004
Nam Programming :
Nam Set: 5759789*#, rec key (3)times (spc - 915037)

Motorola ms200, ms230, etc
Nam Programming :
Nam Set: 5759789*# (spc - 915037)

Motorola v6060
Nam Programming :
Nam Set:147*369#456*0#

Motorola Razr V3C
Nam Programming:
Nam Set: 74663 # clr clr
Nam Set: #073887* , then SPC
MOTOROLA TEST MODE :
v60, c120, c331, etc:
1) Turn on the phone. Press MENU 0 7 3 8 8 7 *
2) The phone will require you to "Enter a Security Code", press 000000, OK
3) Scroll down to "Test mode" choose SELECT. Scroll down to "Enable"
choose SELECT. Your phone is now in test mode.
4) Signal strength is the 3_rd number down on the left hand side of the screen.
5) To toggle between regular mode and test mode: Press MODE then
quickly press the BUTTON DIRECTLY TO THE LEFT OF MENU.
6) To turn off the test mode the phone must be in regular mode, then follow
the above sequence and scroll down to where it says "DISABLE" instead of
"ENABLE" and choose select.
Motorola Bible - bible.txt

<<LG>>

lgc-300, etc
Nam Programming :
Nam Set: Menu, 9, Spc
A-key: Press "Sto" 3sec, 2539**

lgc-330w, etc
Nam Programming :
Nam Set: Menu, 4, 0, Spc
A-key: 2539**

lgc-510, v111, etc
Nam Programming :
Nam Set: Menu, 3, 0, Spc
A-key: 2539**

lgc-500, 800w, etc
Nam Programming :
Nam Set: Menu, 9 , 0, Spc
Debug Mode: Menu, 7, 0, Fsc
Debug Mode: Menu, 8, 0, Fsc
A-key: 2539**

Lg LX,VX-series, VX4400, VX6000, etc
Nam Programming :
Nam Set: ##Spc
Nam Set: Menu, 0
Advanced Settings: ##2342
Vocoder: ##8626337,ok
CAI Change: ##7738,ok
Enable TTY: ##889,ok
A-key: ##2539,ok
Reset (Life time, Clear Memory, etc): ##786,ok

<<SK TELETECH>>

Sky All Models
Nam Programming :
Nam Set: #7583538324#626#
Nam Set: *759#364*7388464#
Min simple mode: #758353266#646#
Irm simple mode #758353266#476#
Voice memo: #8767#277#
Test Mode: #7583538324#8378#
A-key: #758353266#2539#
Service Menu: Menu+4+0+Spc
Service Menu: Menu+5+0+Spc
<<WITHUS / MODOTTEL>>

Withus wce-100, 200, 300, etc
Nam Programming :
Nam Set: ##948487+Save
Nam Set: ##948482+Save
Nam Set: ##66835+Save
SMS Settings: ##76766
NVM Rebuild: ##777464

<<HYUNDAI>>

Hyundai hwp-110
Nam Programming :
Nam Set: #86904**89397#
DM Mode: ##2740*
(Open phone, inter code, close phone)

Hyundai hgc-120, 130, 200
Nam Programming :
Nam Set: #86904**89397#

Hyundai hgc-310, 600, 610
Nam Programming :
Nam Set: ##20022002+Pwr+1+Spc Code
Field Test: ##20022002+Pwr+1+Master Code

Hyundai Curitel h-100, 150, hx-510b, 520
Nam Programming :
Nam Set: ##20022002+Pwr+1+Spc Code
Field Test: ##20022002+Pwr+1+Master Code
A-key: 2539**
Debug Menu: ##27732726+Pwr
Sar Test: ##27752345+Pwr
Baud Rate: ##36**+Pwr
DM Mode Enable: **1004+Pwr
DS Mode Enable: **1005+Pwr
Test Bell/Voice/Led/Dot: ##1122+Pwr
RF Mode: ##2240+Pwr
Ras Ram: ##2774+Pwr
Cmux1: **0481+Pwr
Cmux2: **0482+Pwr
RX Mode Fax: **0492+Pwr
RX Mode Data: **0491+Pwr
RX Mode Reset: **0490+Pwr

<<HUAWEI>>

Huawei ETS-668, 678, 688, etc
Nam Programming :
Debug Mode: ##44+Menu
Debug Screen: ##33+Menu
CDG2 Test enable: ##234+Menu
CDG2 Test disable: ##432+Menu
China Lang Select: ##123+Menu
Blocking Debug Code: ###888+Menu
Home System Only On: ##461+Menu
Home System Only Off: ##460+Menu

<<SONY ERICSSON>>

Ericsson A1228c, T61, etc
Nam Programming :
Short NAM: 987+Menu
Long NAM: 923885+Menu+Spc
CDMA Mode: 904093+Menu
Analog Mode: 904095+Menu
QNC: 904097+Menu
Debug Screen: 904090+Menu
DM Mode: 904050+Menu

Sony-Ericsson T608
Nam Programming :
Nam Set: 923885, Joystick to the right, 111111

<<EPSILON / COMPAL>>

Epsilon vc-5x
Nam Programming :
Nam Set: **147258963##
Programming1: **1232580##
Programming2: **321456987##
Version: **1470963##
Debug: **000000##
Menu_1: **078987##
Menu_2: **1234756##
A-key: 2539**
Reset: **14789##

<<VK MOBILE>>

VK-100C, 110C, 200C, etc
Nam Programming :
Nam Set: 153147539741593
Test Mode: 153147539123258 (88 - clear efs)

< <GIGA TELECOM>>

Z510, Z710i(gcd-456)
Nam Programming :
Nam Set: Menu+0+Spc

<<AnyDATA>>

AMC450
Nam Programming :
Nam Set: *74269#*748#96148063+SEL

<<ZTE>>

ZTE C150
Nam Programming:
Nam Set: *983*3641#

<<GTRAN>>

Gtran gcp-2000
Nam Programming :
Nam Set: 01#737+Spc
Debug Menu: 01#324+Spc
Debug Mode: 01#727
Test Mode: 01#764+Spc
System Test Mode: 01#768+Spc

Gtran gcp-5000
Nam Programming :
Debug Mode: 01#727+Spc
Test Mode: 01#765

<<PANASONIC>>

PANASONIC TEST MODE :
Panasonic (Most):
1) Turn on the phone. Press #7764726# choose SEND
2) Scroll down to where it says "NAM 1" and choose OK. Scroll down
to "Access To Level 4" choose YES. Scroll down to "Built-In-Monitor"
and choose EDIT.
3) Press 1 and choose OK then choose BACK. The phone will say
"Back To Level 1" choose YES. Now choose EXIT the phone will ask you
"Exit And Save Change" choose YES.
4) Signal strength is the top right number on the screen.
5) To turn off the test mode follow the above sequence except press 0
instead of 1 at the "Built-In-Monitor"
<<SYNERTEK>>
Synertek S200 Nam Programming :
Nam Set: Menu+0+Spc
Debug Mode:
Test vibro/rx/tx: ##5555+Save
Debug Screen: ##33+Save
Debug Screen: ##523+Save
RF Test: ####+Save
Unknown code: ##325+Save
<<SONY>>
Sony CM-M1300, 3300, Z200 Nam Programming :
Nam Set: 111111+Ok(Jog Dial)+Select+Programming+Ok+Spc

**Icarusul** · 27-08-2008

GSM SECRET CODES

LG

To see version on LG 81X0
277634#*#
To enter unlock code :
2945#*88110#
IMEI (ALL): * # 06 #
IMEI and SW (LG 510): * # 07 #
software version (LG B1200 ): * 8375 #
recount cheksum (LG B1200 ): * 6861 #
factory test (B1200): #PWR 668
unknow (LG 500 ): 8060#*
unknow(LG 200 ) *789# + send
unknow (LG 500 ): 9270#* and 9278#*
Simlock menu (LG B1200): 1945#*5101#
Simlock menu (LG 510W, 5200): 2945#*5101#
Simlock menu (LG 7020, 7010): 2945#*70001#
Simlock menu (LG 500, 600 ): 2947#*
lg 5300 :2945#*5301#
how to read data calcfor LG510w:
just read button not read cal. data
adress: 0x1000004
size: 0x438
then read.

MAXON

*#9917#
#9917*network code#
#9917*part IMSI#
#9917*simlock SLPUK#
#9917*IMSI#
SG1000 Master Code Unlock 24681357
SG1000 Security Code Unlock *#*#1705#46 +ok (EEP reset)
this code is for enter in serviçe menu *#*#1705#
Mitsibushi
*#06# View IMEI
*#0044# English
*#0049# Deutsch
hold * 4329 Net Monitor1
hold * 621342 Net Monitor2
hold * 5472 M4 Testmode
hold * 5806 SW version
hold * 5807 HW version
hold * 936505 SW and HW version
hold * 482896 CP Lock Menu
hold * 574243 NS Lock Menu
hold * 967678 SP Lock Menu
hold * 362628 IMSI Lock Menu
hold * 787090 Lock net.level
hold * 787292 Lock net.level
Firmware Press and hold C, enter 597, release C
secret menu Press and hold C, enter 987, release C.Press OK
debug mode Press and hold C, enter 397, release C
phase-2 mode Press and hold C, enter 499, release C
Turn off phone Press and hold C, enter 999, release C

Motorola

*#06# Imei Number.
Motorola 8400 Secret Codes
IMEI Nummer *#06#
Motorola 8700 Secret Codes*
IMEI Nummer *#06#
Motorola T 2288 Secret Codes
IMEI Nummer *#06#
Motorola P 7389 Secret Codes
IMEI Nummer *#06#
Motorola L 7089 Secret Codes
IMEI Nummer *#06#
Motorola V 3688 Secret Codes
IMEI Nummer *#06#
Motorola V 3690 Secret Codes
IMEI Nummer *#06#

NEC

IMEI *#06#
Version * # 2820 #
hardware reset *73738# (send?)
Lock info * # 3210 # (send?) - SP lock
* # 8140 # (send?) - Net lock
SIM LOCK
*#4960 # (send?) - info
*4960*pass*pass#(send?) -lock
#4960*pass#(send?) -unlock
pass is 8 digits

Lock Status * # 3210 # (send?) - SP lock
* # 8140 # (send?) - Net lock

code for repair n21 n22 n223
*#3727372#

Nokia

Nokia 1610 Secret Codes
IMEI Nummer *#06#
Software Version *#170602112302#

Nokia 2010 Secret Codes
IMEI Nummer *#06#
Software Version *#9999#
Nokia 2110 Secret Codes
IMEI Nummer *#06#
Software Version *#9999#
Nokia 2110e Secret Codes
IMEI Nummer *#06#
Software Version *#170602112302#
Firmware-Datum *#3283# bzw. *#DATE#
Nokia 2110j Secret Codes
IMEI Nummer *#06#
Software Version *#682371158412125#
Firmware-Datum *#3283# bzw. *#DATE#
Nokia 3110 Secret Codes
IMEI Nummer *#06#
Software Version *#0000# bzw. *#9999# bzw. *#3110#
Werkseinstellungen *#7780#
Simlock info *#92702689#
Nokia 3210 Secret Codes
IMEI Nummer *#06#
Software Version *#0000#
Servicemenu *#92702689#
Nokia 5110 Secret Codes
IMEI Nummer *#06#
Software Version *#0000#
Servicemenu *#92702689#
Provider lock status *#pw+1234567890+1
Network lock status #pw+1234567890+2
Provider lock status #pw+1234567890+3
SimCard lock status #pw+1234567890+4
Nokia 5120 Secret Codes
IMEI Nummer *#06#
Software Version *#0000#
Provider lock status *#pw+1234567890+1
Network lock status #pw+1234567890+2
Provider lock status #pw+1234567890+3
SimCard lock status #pw+1234567890+4
Nokia 5130 Secret Codes
IMEI Nummer *#06#
Software Version *#0000#
Servicemenu *#92702689#
Provider lock status *#pw+1234567890+1
Network lock status #pw+1234567890+2
Provider lock status #pw+1234567890+3
SimCard lock status #pw+1234567890+4
Nokia 5190 Secret Codes
IMEI Nummer *#06#
Software Version *#0000#
Provider lock status *#pw+1234567890+1
Network lock status #pw+1234567890+2
Provider lock status #pw+1234567890+3
SimCard lock status #pw+1234567890+4
Nokia 6110 Secret Codes
IMEI Nummer *#06#
Software Version *#0000#
Nokia 6130 Secret Codes
IMEI Nummer *#06#
Software Version *#9999#
Servicemenu *#92772689#
Nokia 6150 Secret Codes
IMEI Nummer *#06#
Service menu *#92702689#
Nokia 7110 Secret Codes
IMEI Nummer *#06#
Servicemenu *#92702689#
Nokia 8110 Secret Codes
IMEI Nummer *#06#
Software Version *#8110#
Service menu *#92702689#
Nokia 8148 Secret Codes
IMEI Nummer *#06#
Nokia 8810 Secret Codes
IMEI Nummer *#06#
Software Version *#0000#
Serial number *#92702689#
Nokia 9000 Secret Codes
IMEI Nummer *#06#
Software Version *#682371158412125#
Nokia PT11 Secret Codes
IMEI Nummer *#06#
Software Version *#9999#
Nokia PT11NF Secret Codes
IMEI Nummer *#06#
Software Version *#170602112302# bzw. *#682371158412125#

Panasonic

GD55/G50/G51/G70/A100/A101/A102/X300: with or w/o SIM press *#369# and go to menu ¡°SW Version¡±
- GD67/GD87/X60/X66/X100/X200/X400/X500: with SIM press *#9999# while phone searching for network
- X200 : with SIM press #02# while phone searching for network
- X6X : Power on the phone with valid sim card and tape this code : 52824**
then tape 746, Menu, Menu then enter your code

Philips

PHILIPS DIGA *#06# IMEI
*#3333*# Blocking list
*#2558*# All time connected
*#3377*# IMEI,FLAGS,SIM LOCK
*#7489*# Security code ???
*#3353*# clear Blocking List
PHILIPS FIZZ *#06# IMEI
*#8377*# Software version
*#1234*# Security code
*#5644*# Service code
PHILIPS SPARK *#06# IMEI
*#2254*# Status register
*#2255*# Some kind of monitor mode during dialing.
*#2558*# Time connected to net.
*#2562*# ??? number of reconnections
*#2565*# Warm restart
*#3333*# BLOCKINGLIST
*#2377*# ???BERR Phone waits random time and reconnects to network.
*#3377*# Information, SIM-lock
*#7378*# SIM info
*#7489*# SECURITY CODE
*#7693*# Sleep mode
*#7948*# Turn off phone
*#8463*# Information on sleep mode
PHILIPS GENIE *#06# IMEI
*#2254*# STATUS REGISTER
*#2255*# Some kind of monitor mode during dialing.
*#2377*# ???BERR reconnect?
*#2355*# Near Cell Mode. U can see parameters of three nearest cells
*#2558*# Time connected
*#2562*# number of reconnections
*#2565*# Warm restart
*#2772*# Base Station Paging Multiframe.
*#2847*# HIDDEN MENU!: 5.5:Closed User Groups
*#3333*# BLOCKING - list
*#3353*# clears Blocking list
*#3377*# SIM LCK
*#4263*# Hs-OK:0 KO:0 , HNS-OK:0 KO:0
*#4377*# ??? battery charging ???
*#7378*# SIM phase
*#7489*# Security code
*#7693*# SLEEP-mode
*#7948*# Turn off

Samsung

E710/715
*#32436837# DATE ON Digital Audio Interference On
*#3243948# DATE OFF Digital Audio Interference Off
*#9324# MONITOR
*#0746# SMS MEMORY:20
*#0842# vibration on
*#0289# buzzer on
*#4357# HELP (4357) This screen!!!!!!!
*#7777# SW
*#8888# HW
*#9999# Reverse HW
*#0782# LIVE TIMER
*#0523# 41 (80) menu: 12
*#0638# SIM: f23003 F230 030
*#0778# SST size: 10
*#9273696# Java D/L setting
*#92782# Wap user agent
*#9998*5646# change operator logo at startup
*#9998*76# production number
*#9998*968# view melody for alarm - YAMAHA OK
*#0778# Sim Service table
*#9998*523# or *#9998*0523# or *#0523# Display Contrast
*#9998*288# or *#9998*0288# or *#0288# Battery & Field Infos
*#9998*5282# Java menu (GRPS/CSD settings for JAVA server)
E700/S500 100%..... X100/X600???!!!???
#*566335# Wap model ID
#*5663352# java model
#*5663351# model
#*53696# java download mode
#*536963# serial enabl others disabled
#*536962# HTTP enabl WAPSAR disabled
#*536961# WAPSAR enabl HTTP dis
*663867 MF file dumped
*335 All MMS mes deled
*2767*77667# Spain MMS settings
*2767*78667# Portugal
*2767*65667# Netherland
*2767*29667# Czech
*2767*28667# Austria
*2767*48667# Italy
*2767*37667# France
*2767*85667# Uk
*2767*33667# Germany
*2767*73738927# MMS Reset????
*2767*77927# Spain WAP Setting are applied
*2767*78927# Portugal
*2767*29927# Czech
*2767*65927# Netherlands
*2767*28927# Austria
*2767*37927# France
*2767*48927# Italy
*2767*85927# Uk
*2767*33927# Germany
#7263867# Ram Dump On
#*3232# Current Mode - DCD mode
#*3231# DCD en TRACE dis
#*3230# TRACE en DCD dis
*#8377466# SW + HW info
*#8888# HW info
*#9999# SW info
*#8999*8376263# komplet info
*#8999*636# IPD info
#*2677# ARM state: None
#*0000# ??????
*#8999*324# Net monitor??
#*6100# command #*6100# Executed
*2767*3700# SGH-E700 BSI
*2767*7100# SGH-S100
*2767*8200# SGH-V200
*2767*7300# SGH-S300
#0111*codigo#
*2767*637#
*2767*688#
*2767*wap#
*2767*media#
*2767*mms#
*2767*226372# Camera Reset
*2767*688# MEP off
*2767*927# WAP
*2767*2878# E2P Custom reset
*2767*3855# E2P Full reset
*2767*2878# Sec reset
#*7828# C??? Midi Ri51
#*5111# PI 0813 33 99 MSI 7 NA 0 18 P99 T00 CffHff
#*2562# nejakej reset
#*2565# no blocking General Defense
#*3353# General defense Code Erased
#*5376# reset All SMS Deleted
#*7222# Operation Typ: Class C GSM
#*7224# Error!!!!
#*7252# Operation Typ: Class B GSM
#*7271# multi Slot Class 1 GPRS
#*7274# multi Slot Class 4 GPRS
#*2787# CRTP on - Batery options
#*3737# L1 AFC DeltaF -36 NbAfcCorr 0 AdjustFoi 0 CumFoi 0
#*3825# Command #*3825# Executed
#*5133# L1 HO Data Async HO 83 Sync HO 0 HO Fail 0 TCH 40
#*7288# GPRS Detached
#*7287# GPRS Detached
#*7666# SrCell data RAC 255 NMO 255
#*7693# Sleep Deact
#*7284# Class B
#*2256# Calibr - info
#*2286# DATAbattery
#*2527# GPRS switching set to class 4
#*2679# Copycat feat. Activated
#*3940# External looptest 9600bps not avalible in SYSOL2!
#*4263# handsfree mode Activated
#*4700# Half rate deact
#*7352# BVMC Reg vaule Set BMVC to 00H For Cmd set DEBUGBATTERY in cihard.opt
#*8462# Sleeptime sinc SwitchOf
#*2558# Time ON For Cmd set DEBUGBATTERY in cihard.opt
#*3370# EFR Deact
#*3941# External looptest 115200bps not avalible in SYSOL2!
#*5176 L1 Sleep TOI N:5 TOI P:0
#*7462# SIM phase 3
#*7983# Voltage/Freg Deact
#*7986# Voltage Activated
#*8466# Old time
#*2255# Call failed mode: Command not Implemented
#*5187# L1C2G trace Activated
#*6837# Official SW version: 120107A1
#*7524# KCGPRS: +data
#*7562# LOCI GPRS: +data
#*7638# RLC allwazs open ended TBF Actiated
#*7632# Sleep mode Debug: +data
#*7673# Sleep mode RESET
#*2337# Permanent Registrtion Beep: NOT YET IMPLEMENTED
#*2474# For Cmd set DEBUGBATTERY in cihard.opt
#*2834# Audio Pth Mobile Normal
#*3270# DCS support Deact
#*3282# Data Deact
#*3476# EGSM Deact
#*3676# falh volume formated
#*4674# IMSI: +data
#*4760# GSM Activated
#*4864 pro tento model nic
#*5171 data
#*5172 data
#*5173 data
#*7326# Accessorz: vibrator
#*7676# Command #*7676# Executed
#*7683# Sleep variable
#*7762# SMS Bearer CS Activated
#*7957# Command #*7957# Executed
#*8465# Time in L1 +data
#*9278# Command #*9278# Executed
#*9795# WTLS key Reset
#*2252# Current call: +data
#*2836# AVDDSS Managment Deact.
#*3877# Dump of SPY trace: +data
#*7728# RSAV done

Sharp

sharp reset EEP
1, push at once key 0+3+right option key up+red key (white screen)
2, in sequence push key 0,1,2,3, right option key up,1 (service menu)
3, write 99 and push right option key up
4, write 01 and push right option key up (now start RESET EEPROM)
Wait.....
5, push any key
6, push blue key menu (save)
7, power off
Sharp GX-10 unlock solution
With Sim Card (of locked network) in phone:
*01763*6371# and press M.
In menu go to: SETTINGS->SELECT->SECURITY
then in Security menu:MEP LOCKS->SELECT
insert default security code 0000
In menu go to NETWORK and choose DEACTIVATE
press SELECT and insert 812664697614
Press OK, phone anwser will be:

Sony-Ericssion

*#06# Imei Number.
>*<<*<* Software version.
*#0000# Default English.
<**< unlock Menu .