SharePoint Services 3.0 Configuration Wizard error

Our software:
- SBS 2003 SP1
- ISA 2004 SP 3
- .NET Framework 3.0
- SharePoint Services 2.0
- SQL Server 2000 (SHAREPOINT)
- WSUS 3.0
Our goal:
- Install SharePoint Services 3.0
Our problem:
- Following "Installing Windows SharePoint Services 3.0 on a server
running WSBS 2003", after installing SharePoint Services 3.0 in step 2
with succes, we've got an error running "SP services products and
technologies" wizard in step 4: an exception in the application
HRESULT: 0x80004004.
After that, I checked PSCDiagnostics log (in Microsoft Shared\Web
Server Extensions\12\LOGS) and I found no error.
I also tried to repair SharePoint services 3.0 from add/remove
programs, rebooted the server, and always the error.
I installed sharepoints 3.0 updates suggested by Microsoft Updates:
same error.
Finally, I kept on with the following step in procedure, creating a
new intranet site using SP services 3.0, and it worked!
But, even if the new intranet is active and ready to use, I can not
run companyweb anymore, and and old ASP 1 application no more.
Could someone guide me with this ?
Thanks

Go to companyweb properties and makes the ASP.net version used is set to
version 1.1. If you have to change it back to versions 1.1, go to the
command prompt and issue an 'iisreset'. Do the same thing for the web site
that your custom application is using

--
Costas


"Omar Seri" <omar.seri@telequal.com> wrote in message
news:1193231236.067299.129820@q5g2000prf.googlegroups.com...
> Our software:
> - SBS 2003 SP1
> - ISA 2004 SP 3
> - .NET Framework 3.0
> - SharePoint Services 2.0
> - SQL Server 2000 (SHAREPOINT)
> - WSUS 3.0
> Our goal:
> - Install SharePoint Services 3.0
> Our problem:
> - Following "Installing Windows SharePoint Services 3.0 on a server
> running WSBS 2003", after installing SharePoint Services 3.0 in step 2
> with succes, we've got an error running "SP services products and
> technologies" wizard in step 4: an exception in the application
> HRESULT: 0x80004004.
> After that, I checked PSCDiagnostics log (in Microsoft Shared\Web
> Server Extensions\12\LOGS) and I found no error.
> I also tried to repair SharePoint services 3.0 from add/remove
> programs, rebooted the server, and always the error.
> I installed sharepoints 3.0 updates suggested by Microsoft Updates:
> same error.
> Finally, I kept on with the following step in procedure, creating a
> new intranet site using SP services 3.0, and it worked!
> But, even if the new intranet is active and ready to use, I can not
> run companyweb anymore, and and old ASP 1 application no more.
> Could someone guide me with this ?
> Thanks
>

Sharepoint may be corrupted. May try uninstalling wss3, follow KB829114 to
reinstall companyweb and sharepoint. Then reinstall wss3.0.

"Omar Seri" wrote:

> Our software:
> - SBS 2003 SP1
> - ISA 2004 SP 3
> - .NET Framework 3.0
> - SharePoint Services 2.0
> - SQL Server 2000 (SHAREPOINT)
> - WSUS 3.0
> Our goal:
> - Install SharePoint Services 3.0
> Our problem:
> - Following "Installing Windows SharePoint Services 3.0 on a server
> running WSBS 2003", after installing SharePoint Services 3.0 in step 2
> with succes, we've got an error running "SP services products and
> technologies" wizard in step 4: an exception in the application
> HRESULT: 0x80004004.
> After that, I checked PSCDiagnostics log (in Microsoft Shared\Web
> Server Extensions\12\LOGS) and I found no error.
> I also tried to repair SharePoint services 3.0 from add/remove
> programs, rebooted the server, and always the error.
> I installed sharepoints 3.0 updates suggested by Microsoft Updates:
> same error.
> Finally, I kept on with the following step in procedure, creating a
> new intranet site using SP services 3.0, and it worked!
> But, even if the new intranet is active and ready to use, I can not
> run companyweb anymore, and and old ASP 1 application no more.
> Could someone guide me with this ?
> Thanks
>
>

On 26 oct, 06:23, zeiss <ze...@discussions.microsoft.com> wrote:
> Sharepoint may be corrupted. May try uninstalling wss3, follow KB829114 to
> reinstall companyweb and sharepoint. Then reinstall wss3.0.
>
>
>
> "Omar Seri" wrote:
> > Our software:
> > - SBS 2003 SP1
> > - ISA 2004 SP 3
> > - .NET Framework 3.0
> > - SharePoint Services 2.0
> > - SQL Server 2000 (SHAREPOINT)
> > - WSUS 3.0
> > Our goal:
> > - Install SharePoint Services 3.0
> > Our problem:
> > - Following "Installing Windows SharePoint Services 3.0 on a server
> > running WSBS 2003", after installing SharePoint Services 3.0 in step 2
> > with succes, we've got an error running "SP services products and
> > technologies" wizard in step 4: an exception in the application
> > HRESULT: 0x80004004.
> > After that, I checked PSCDiagnostics log (in Microsoft Shared\Web
> > Server Extensions\12\LOGS) and I found no error.
> > I also tried to repair SharePoint services 3.0 from add/remove
> > programs, rebooted the server, and always the error.
> > I installed sharepoints 3.0 updates suggested by Microsoft Updates:
> > same error.
> > Finally, I kept on with the following step in procedure, creating a
> > new intranet site using SP services 3.0, and it worked!
> > But, even if the new intranet is active and ready to use, I can not
> > run companyweb anymore, and and old ASP 1 application no more.
> > Could someone guide me with this ?
> > Thanks- Ocultar texto de la cita -
>
> - Mostrar texto de la cita -

I uninstalled wss3.0 and then I followed KB829114 to reinstall
companyweb and sharepoint.
After that, even the message at the end of the intranet component
suggesting to (re?) install SBS 2003 SP1 (what part of it?) and
without doing anything else, http://companyweb shows the default
intranet web application.
The problem arrived when trying to restore the old dbs (STS_config and
STS_servername_1) : after dettaching the recently created dbs and
attaching the old ones, if I try to see the databases properties in
Entreprise manager, I've got (a translation) "Error 954: database
'STS_config' scheme is incorrect" in a "Microsoft SQL-DMO (ODBC
SQLState : 42000)" windows.
The problem deals with sharepoint 2.0 versions (after reinstalling
from SBS CD 3 there's no SP installed), or with MSDE SP version?
Could someone help me restoring my sharepoint 2.0 companyweb?
Thanks

did you install sbs sp1 before? I suggest reinstalling it.

http://support.microsoft.com/default.aspx/kb/829113
did you install sql full version on the sbs server?

"Omar Seri" wrote:

> On 26 oct, 06:23, zeiss <ze...@discussions.microsoft.com> wrote:
> > Sharepoint may be corrupted. May try uninstalling wss3, follow KB829114 to
> > reinstall companyweb and sharepoint. Then reinstall wss3.0.
> >
> >
> >
> > "Omar Seri" wrote:
> > > Our software:
> > > - SBS 2003 SP1
> > > - ISA 2004 SP 3
> > > - .NET Framework 3.0
> > > - SharePoint Services 2.0
> > > - SQL Server 2000 (SHAREPOINT)
> > > - WSUS 3.0
> > > Our goal:
> > > - Install SharePoint Services 3.0
> > > Our problem:
> > > - Following "Installing Windows SharePoint Services 3.0 on a server
> > > running WSBS 2003", after installing SharePoint Services 3.0 in step 2
> > > with succes, we've got an error running "SP services products and
> > > technologies" wizard in step 4: an exception in the application
> > > HRESULT: 0x80004004.
> > > After that, I checked PSCDiagnostics log (in Microsoft Shared\Web
> > > Server Extensions\12\LOGS) and I found no error.
> > > I also tried to repair SharePoint services 3.0 from add/remove
> > > programs, rebooted the server, and always the error.
> > > I installed sharepoints 3.0 updates suggested by Microsoft Updates:
> > > same error.
> > > Finally, I kept on with the following step in procedure, creating a
> > > new intranet site using SP services 3.0, and it worked!
> > > But, even if the new intranet is active and ready to use, I can not
> > > run companyweb anymore, and and old ASP 1 application no more.
> > > Could someone guide me with this ?
> > > Thanks- Ocultar texto de la cita -
> >
> > - Mostrar texto de la cita -
>
> I uninstalled wss3.0 and then I followed KB829114 to reinstall
> companyweb and sharepoint.
> After that, even the message at the end of the intranet component
> suggesting to (re?) install SBS 2003 SP1 (what part of it?) and
> without doing anything else, http://companyweb shows the default
> intranet web application.
> The problem arrived when trying to restore the old dbs (STS_config and
> STS_servername_1) : after dettaching the recently created dbs and
> attaching the old ones, if I try to see the databases properties in
> Entreprise manager, I've got (a translation) "Error 954: database
> 'STS_config' scheme is incorrect" in a "Microsoft SQL-DMO (ODBC
> SQLState : 42000)" windows.
> The problem deals with sharepoint 2.0 versions (after reinstalling
> from SBS CD 3 there's no SP installed), or with MSDE SP version?
> Could someone help me restoring my sharepoint 2.0 companyweb?
> Thanks
>
>