"Microsoft Windows SharePoint Services 3.0 setup did not complete successfully" on SBS 2003

#1 02-01-2007

When installing the newest sharepoint on our SBS server, using the
official SBS-Sharepoint doc form MS, I get: "Microsoft Windows
SharePoint Services 3.0 setup did not complete successfully"

After that, if I try to go to configuration anyway, I get the
following:

"failed to start the database service MSSQL$MICROSOFT##SSEE. Repair
this product"

After I do a repair, I go back into the sharepoint configuration it
still does not work and says it can't conect to a database (Don't have
the exact error at this moment).

What can I do to successfully do a side by side installation? I was
using the doc found here:
http://www.microsoft.com/downloads/d...displaylang=en

Thank You

Joseph

#2 03-01-2007

Hello Joseph,

Thank you for posting here.

According to your description, I understand that your WSS 3.0 setup did not
complete successfully and you can not configure the WSS. If I have
misunderstood the problem, please don't hesitate to let me know.

Based on my research, I think the installation did not complete
successfully refer to previous version of ASP.NET3.0 was not uninstalled
properly. I suggest we try the following steps to see if we can resolve
this issue:

Step 1: uninstall WSS 3.0

To delete the Windows SharePoint Services 3.0 default Web site
1. Click Start, point to All Programs, point to Administrative Tools, and
then click SharePoint 3.0 Central Administration.

2. On the Application Management tab, in SharePoint Web Application
Management, click Delete Web Application.

3. On the Delete Web Application page, complete the following:

a. In Web Application, from the drop-down menu, click Change Web
Application. On the Select Web Application page, select the Windows
SharePoint Services 3.0 default Web site (http://ServerName).

Note: Make sure that you delete the default Web site (http://ServerName)
and not the site that you just created in the preceding step.

b. In Delete options, delete the content databases and the IIS Web sites.

c. Click Delete.

d. In the warning message box, click Yes.

4. Wait for the Application Management tab to appear, and then close the
Windows SharePoint Services Central Administration site.

Step 2: reinstall .net 3.0

1. Download the following tool at link below
http://www.microsoft.com/downloads/d...C63-D405-4E13-
909F-E85AA9E66146&displaylang=en

2. Run the tool to uninstall previous version .net 3.0

3. Please download .net 3.0 from the following link
http://go.microsoft.com/fwlink/?LinkId=77799

4. Then re-install .net 3.0

Step 3: reinstall WSS 3.0

Please go through the following document and perform the WSS 3.0
installation steps (step 2 to step 4)

http://www.microsoft.com/downloads/d...c81-efff-4f5b-
a28a-8265f1e99f5b&displaylang=en

Additional info:

Windows SharePoint Services Administrator's Guide
<http://www.microsoft.com/downloads/d...eff6-8224-4b19
-a6a4-3e
33fa13d230&DisplayLang=en>

SharePoint Portal Server 2003 Administrator's Guide
<http://www.microsoft.com/downloads/d...5143-F586-4941
-92F5-04
8BF00CF332&displaylang=en>

If the issue persists, please kindly help me collect some information for
further investigation:

1. Please capture screenshot on the error message and send the picture to
me at v-terliu@microsoft.com

2. Download the Setup Edition of MPS_Report tool from
http://download.microsoft.com/downlo...5-a579-30b0bd9
15706/MPSRPT_SETUPPerf.EXE, run it on the SBS Server. Email me the
%COMPUTERNAME%_MPSReports_.CAB file which is under the
%systemroot%\MPSReports\Setup\Lite\Cab directory.

3. Provide me with the WSS installation log based on the following steps:
a. Click Start, and then click Run.
b. Type "%temp%" (without quotation marks), and then click OK.
c. In the %temp% folder, look for a file or files with the name Microsoft
Windows SharePoint Services 3.0 Setup(000n)_Task(0001).txt.

4. Compress and email me with the C:\Program Files\Microsoft
Integration\Windows Small Business Server 2003\Logs folder.

Hope these steps will give you some help.

Thanks and have a nice day!

Best regards,

Terence Liu(MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities...s/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.
=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------
| From: "Joseph A" <josephalmi@gmail.com>
| Newsgroups: microsoft.public.windows.server.sbs
| Subject: "Microsoft Windows SharePoint Services 3.0 setup did not
complete successfully" on SBS 2003
| Date: 2 Jan 2007 09:21:34 -0800
| Organization: http://groups.google.com
| Lines: 22
| Message-ID: <1167758494.668750.145770@n51g2000cwc.googlegroups.com>
| NNTP-Posting-Host: 207.59.110.74
| Mime-Version: 1.0
| Content-Type: text/plain; charset="iso-8859-1"
| X-Trace: posting.google.com 1167758500 30714 127.0.0.1 (2 Jan 2007
17:21:40 GMT)
| X-Complaints-To: groups-abuse@google.com
| NNTP-Posting-Date: Tue, 2 Jan 2007 17:21:40 +0000 (UTC)
| User-Agent: G2/1.0
| X-HTTP-UserAgent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1;
.NET CLR 2.0.50727; .NET CLR 1.1.4322; InfoPath.1),gzip(gfe),gzip(gfe)
| Complaints-To: groups-abuse@google.com
| Injection-Info: n51g2000cwc.googlegroups.com; posting-host=207.59.110.74;
| posting-account=wXaoqA0AAAAksJyiE6_iRXyc1AN8zufd
| Path:
TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS01.phx.gbl!msrtrans!
msrn-in!newshub.sdsu.edu!postnews.google.com!n51g2000cwc.googlegroups.com!no
t-for-mail
| Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:7646
| X-Tomcat-NG: microsoft.public.windows.server.sbs
|
| When installing the newest sharepoint on our SBS server, using the
| official SBS-Sharepoint doc form MS, I get: "Microsoft Windows
| SharePoint Services 3.0 setup did not complete successfully"
|
| After that, if I try to go to configuration anyway, I get the
| following:
|
| "failed to start the database service MSSQL$MICROSOFT##SSEE. Repair
| this product"
|
| After I do a repair, I go back into the sharepoint configuration it
| still does not work and says it can't conect to a database (Don't have
| the exact error at this moment).
|
| What can I do to successfully do a side by side installation? I was
| using the doc found here:
|
http://www.microsoft.com/downloads/d...c81-efff-4f5b-
a28a-8265f1e99f5b&displaylang=en
|
| Thank You
|
| Joseph
|
|

#3 03-01-2007

I had already went to Add/Remove Programs and removed WSS 3.0 after it
failed... will that make a large difference with the instructions you
provided?

Thank you for the help

Joseph

Terence Liu [MSFT] wrote:
> Hello Joseph,
>
> Thank you for posting here.
>
> According to your description, I understand that your WSS 3.0 setup did not
> complete successfully and you can not configure the WSS. If I have
> misunderstood the problem, please don't hesitate to let me know.
>
> Based on my research, I think the installation did not complete
> successfully refer to previous version of ASP.NET3.0 was not uninstalled
> properly. I suggest we try the following steps to see if we can resolve
> this issue:
>
> Step 1: uninstall WSS 3.0
>
> To delete the Windows SharePoint Services 3.0 default Web site
> 1. Click Start, point to All Programs, point to Administrative Tools, and
> then click SharePoint 3.0 Central Administration.
>
> 2. On the Application Management tab, in SharePoint Web Application
> Management, click Delete Web Application.
>
> 3. On the Delete Web Application page, complete the following:
>
> a. In Web Application, from the drop-down menu, click Change Web
> Application. On the Select Web Application page, select the Windows
> SharePoint Services 3.0 default Web site (http://ServerName).
>
> Note: Make sure that you delete the default Web site (http://ServerName)
> and not the site that you just created in the preceding step.
>
> b. In Delete options, delete the content databases and the IIS Web sites.
>
> c. Click Delete.
>
> d. In the warning message box, click Yes.
>
> 4. Wait for the Application Management tab to appear, and then close the
> Windows SharePoint Services Central Administration site.
>
> Step 2: reinstall .net 3.0
>
> 1. Download the following tool at link below
> http://www.microsoft.com/downloads/d...C63-D405-4E13-
> 909F-E85AA9E66146&displaylang=en
>
> 2. Run the tool to uninstall previous version .net 3.0
>
> 3. Please download .net 3.0 from the following link
> http://go.microsoft.com/fwlink/?LinkId=77799
>
> 4. Then re-install .net 3.0
>
> Step 3: reinstall WSS 3.0
>
> Please go through the following document and perform the WSS 3.0
> installation steps (step 2 to step 4)
>
> http://www.microsoft.com/downloads/d...c81-efff-4f5b-
> a28a-8265f1e99f5b&displaylang=en
>
> Additional info:
>
> Windows SharePoint Services Administrator's Guide
> <http://www.microsoft.com/downloads/d...eff6-8224-4b19
> -a6a4-3e
> 33fa13d230&DisplayLang=en>
>
> SharePoint Portal Server 2003 Administrator's Guide
> <http://www.microsoft.com/downloads/d...5143-F586-4941
> -92F5-04
> 8BF00CF332&displaylang=en>
>
> If the issue persists, please kindly help me collect some information for
> further investigation:
>
> 1. Please capture screenshot on the error message and send the picture to
> me at v-terliu@microsoft.com
>
> 2. Download the Setup Edition of MPS_Report tool from
> http://download.microsoft.com/downlo...5-a579-30b0bd9
> 15706/MPSRPT_SETUPPerf.EXE, run it on the SBS Server. Email me the
> %COMPUTERNAME%_MPSReports_.CAB file which is under the
> %systemroot%\MPSReports\Setup\Lite\Cab directory.
>
> 3. Provide me with the WSS installation log based on the following steps:
> a. Click Start, and then click Run.
> b. Type "%temp%" (without quotation marks), and then click OK.
> c. In the %temp% folder, look for a file or files with the name Microsoft
> Windows SharePoint Services 3.0 Setup(000n)_Task(0001).txt.
>
> 4. Compress and email me with the C:\Program Files\Microsoft
> Integration\Windows Small Business Server 2003\Logs folder.
>
> Hope these steps will give you some help.
>
> Thanks and have a nice day!
>
> Best regards,
>
> Terence Liu(MSFT)
>
> Microsoft CSS Online Newsgroup Support
>
> Get Secure! - www.microsoft.com/security
>
> =====================================================
> This newsgroup only focuses on SBS technical issues. If you have issues
> regarding other Microsoft products, you'd better post in the corresponding
> newsgroups so that they can be resolved in an efficient and timely manner.
> You can locate the newsgroup here:
> http://www.microsoft.com/communities...s/default.aspx
>
> When opening a new thread via the web interface, we recommend you check the
> "Notify me of replies" box to receive e-mail notifications when there are
> any updates in your thread. When responding to posts via your newsreader,
> please "Reply to Group" so that others may learn and benefit from your
> issue.
>
> Microsoft engineers can only focus on one issue per thread. Although we
> provide other information for your reference, we recommend you post
> different incidents in different threads to keep the thread clean. In doing
> so, it will ensure your issues are resolved in a timely manner.
>
> For urgent issues, you may want to contact Microsoft CSS directly. Please
> check http://support.microsoft.com for regional support phone numbers.
>
> Any input or comments in this thread are highly appreciated.
> =====================================================
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
> --------------------
> | From: "Joseph A" <josephalmi@gmail.com>
> | Newsgroups: microsoft.public.windows.server.sbs
> | Subject: "Microsoft Windows SharePoint Services 3.0 setup did not
> complete successfully" on SBS 2003
> | Date: 2 Jan 2007 09:21:34 -0800
> | Organization: http://groups.google.com
> | Lines: 22
> | Message-ID: <1167758494.668750.145770@n51g2000cwc.googlegroups.com>
> | NNTP-Posting-Host: 207.59.110.74
> | Mime-Version: 1.0
> | Content-Type: text/plain; charset="iso-8859-1"
> | X-Trace: posting.google.com 1167758500 30714 127.0.0.1 (2 Jan 2007
> 17:21:40 GMT)
> | X-Complaints-To: groups-abuse@google.com
> | NNTP-Posting-Date: Tue, 2 Jan 2007 17:21:40 +0000 (UTC)
> | User-Agent: G2/1.0
> | X-HTTP-UserAgent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1;
> NET CLR 2.0.50727; .NET CLR 1.1.4322; InfoPath.1),gzip(gfe),gzip(gfe)
> | Complaints-To: groups-abuse@google.com
> | Injection-Info: n51g2000cwc.googlegroups.com; posting-host=207.59.110.74;
> | posting-account=wXaoqA0AAAAksJyiE6_iRXyc1AN8zufd
> | Path:
> TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS01.phx.gbl!msrtrans!
> msrn-in!newshub.sdsu.edu!postnews.google.com!n51g2000cwc.googlegroups.com!no
> t-for-mail
> | Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:7646
> | X-Tomcat-NG: microsoft.public.windows.server.sbs
> |
> | When installing the newest sharepoint on our SBS server, using the
> | official SBS-Sharepoint doc form MS, I get: "Microsoft Windows
> | SharePoint Services 3.0 setup did not complete successfully"
> |
> | After that, if I try to go to configuration anyway, I get the
> | following:
> |
> | "failed to start the database service MSSQL$MICROSOFT##SSEE. Repair
> | this product"
> |
> | After I do a repair, I go back into the sharepoint configuration it
> | still does not work and says it can't conect to a database (Don't have
> | the exact error at this moment).
> |
> | What can I do to successfully do a side by side installation? I was
> | using the doc found here:
> |
> http://www.microsoft.com/downloads/d...c81-efff-4f5b-
> a28a-8265f1e99f5b&displaylang=en
> |
> | Thank You
> |
> | Joseph
> |
> |

#4 04-01-2007

#5 07-01-2007

Hi Terence,

Unfortunately removing then reinstalling .net as you described did not
change the outcome. I have sent the logs and hope you can assist in
guiding me in my next move.

Thanks!

Joseph

Terence Liu [MSFT] wrote:
> Hello Joseph,
>
> Thank you for kind update.
>
> There is not large difference between step 1. Please start from step 2 now.
>
> Note: the side by side WSS 3.0 installation document you find is great,
> please go through the document more carefully. After reinstall the .net
> 3.0, please perform the steps in the doucment one by one.
>
> Please do not hesitate to let me know if this problem reoccurs or if
> there's anything else I can do for you.
>
> Thank you and have a nice day,
>
> Best regards,
>
> Terence Liu(MSFT)
>
> Microsoft CSS Online Newsgroup Support
>
> Get Secure! - www.microsoft.com/security
>
> =====================================================
> This newsgroup only focuses on SBS technical issues. If you have issues
> regarding other Microsoft products, you'd better post in the corresponding
> newsgroups so that they can be resolved in an efficient and timely manner.
> You can locate the newsgroup here:
> http://www.microsoft.com/communities...s/default.aspx
>
> When opening a new thread via the web interface, we recommend you check the
> "Notify me of replies" box to receive e-mail notifications when there are
> any updates in your thread. When responding to posts via your newsreader,
> please "Reply to Group" so that others may learn and benefit from your
> issue.
>
> Microsoft engineers can only focus on one issue per thread. Although we
> provide other information for your reference, we recommend you post
> different incidents in different threads to keep the thread clean. In doing
> so, it will ensure your issues are resolved in a timely manner.
>
> For urgent issues, you may want to contact Microsoft CSS directly. Please
> check http://support.microsoft.com for regional support phone numbers.
>
> Any input or comments in this thread are highly appreciated.
> =====================================================
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
> --------------------
> | From: "Joseph A" <josephalmi@gmail.com>
> | Newsgroups: microsoft.public.windows.server.sbs
> | Subject: Re: "Microsoft Windows SharePoint Services 3.0 setup did not
> complete successfully" on SBS 2003
> | Date: 3 Jan 2007 10:05:03 -0800
> | Organization: http://groups.google.com
> | Lines: 197
> | Message-ID: <1167847503.794936.254050@a3g2000cwd.googlegroups.com>
> | References: <1167758494.668750.145770@n51g2000cwc.googlegroups.com>
> | <MZxVdcwLHHA.2080@TK2MSFTNGHUB02.phx.gbl>
> | NNTP-Posting-Host: 71.249.220.209
> | Mime-Version: 1.0
> | Content-Type: text/plain; charset="us-ascii"
> | X-Trace: posting.google.com 1167847510 8733 127.0.0.1 (3 Jan 2007
> 18:05:10 GMT)
> | X-Complaints-To: groups-abuse@google.com
> | NNTP-Posting-Date: Wed, 3 Jan 2007 18:05:10 +0000 (UTC)
> | In-Reply-To: <MZxVdcwLHHA.2080@TK2MSFTNGHUB02.phx.gbl>
> | User-Agent: G2/1.0
> | X-HTTP-UserAgent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US;
> rv:1.8.1.1) Gecko/20061204 Firefox/2.0.0.1,gzip(gfe),gzip(gfe)
> | Complaints-To: groups-abuse@google.com
> | Injection-Info: a3g2000cwd.googlegroups.com; posting-host=71.249.220.209;
> | posting-account=wXaoqA0AAAAksJyiE6_iRXyc1AN8zufd
> | Path:
> TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS02.phx.gbl!newsfeed.
> cw.net!cw.net!news-FFM2.ecrc.de!news.glorb.com!postnews.google.com!a3g2000cw
> d.googlegroups.com!not-for-mail
> | Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:7897
> | X-Tomcat-NG: microsoft.public.windows.server.sbs
> |
> | I had already went to Add/Remove Programs and removed WSS 3.0 after it
> | failed... will that make a large difference with the instructions you
> | provided?
> |
> | Thank you for the help
> |
> | Joseph
> |
> |
> | Terence Liu [MSFT] wrote:
> | > Hello Joseph,
> | >
> | > Thank you for posting here.
> | >
> | > According to your description, I understand that your WSS 3.0 setup did
> not
> | > complete successfully and you can not configure the WSS. If I have
> | > misunderstood the problem, please don't hesitate to let me know.
> | >
> | > Based on my research, I think the installation did not complete
> | > successfully refer to previous version of ASP.NET3.0 was not uninstalled
> | > properly. I suggest we try the following steps to see if we can resolve
> | > this issue:
> | >
> | > Step 1: uninstall WSS 3.0
> | >
> | > To delete the Windows SharePoint Services 3.0 default Web site
> | > 1. Click Start, point to All Programs, point to Administrative Tools,
> and
> | > then click SharePoint 3.0 Central Administration.
> | >
> | > 2. On the Application Management tab, in SharePoint Web Application
> | > Management, click Delete Web Application.
> | >
> | > 3. On the Delete Web Application page, complete the following:
> | >
> | > a. In Web Application, from the drop-down menu, click Change Web
> | > Application. On the Select Web Application page, select the Windows
> | > SharePoint Services 3.0 default Web site (http://ServerName).
> | >
> | > Note: Make sure that you delete the default Web site (http://ServerName)
> | > and not the site that you just created in the preceding step.
> | >
> | > b. In Delete options, delete the content databases and the IIS Web
> sites.
> | >
> | > c. Click Delete.
> | >
> | > d. In the warning message box, click Yes.
> | >
> | > 4. Wait for the Application Management tab to appear, and then close the
> | > Windows SharePoint Services Central Administration site.
> | >
> | > Step 2: reinstall .net 3.0
> | >
> | > 1. Download the following tool at link below
> | >
> http://www.microsoft.com/downloads/d...C63-D405-4E13-
> | > 909F-E85AA9E66146&displaylang=en
> | >
> | > 2. Run the tool to uninstall previous version .net 3.0
> | >
> | > 3. Please download .net 3.0 from the following link
> | > http://go.microsoft.com/fwlink/?LinkId=77799
> | >
> | > 4. Then re-install .net 3.0
> | >
> | > Step 3: reinstall WSS 3.0
> | >
> | > Please go through the following document and perform the WSS 3.0
> | > installation steps (step 2 to step 4)
> | >
> | >
> http://www.microsoft.com/downloads/d...c81-efff-4f5b-
> | > a28a-8265f1e99f5b&displaylang=en
> | >
> | > Additional info:
> | >
> | > Windows SharePoint Services Administrator's Guide
> | >
> <http://www.microsoft.com/downloads/d...eff6-8224-4b19
> | > -a6a4-3e
> | > 33fa13d230&DisplayLang=en>
> | >
> | > SharePoint Portal Server 2003 Administrator's Guide
> | >
> <http://www.microsoft.com/downloads/d...5143-F586-4941
> | > -92F5-04
> | > 8BF00CF332&displaylang=en>
> | >
> | > If the issue persists, please kindly help me collect some information
> for
> | > further investigation:
> | >
> | > 1. Please capture screenshot on the error message and send the picture
> to
> | > me at v-terliu@microsoft.com
> | >
> | > 2. Download the Setup Edition of MPS_Report tool from
> | >
> http://download.microsoft.com/downlo...5-a579-30b0bd9
> | > 15706/MPSRPT_SETUPPerf.EXE, run it on the SBS Server. Email me the
> | > %COMPUTERNAME%_MPSReports_.CAB file which is under the
> | > %systemroot%\MPSReports\Setup\Lite\Cab directory.
> | >
> | > 3. Provide me with the WSS installation log based on the following
> steps:
> | > a. Click Start, and then click Run.
> | > b. Type "%temp%" (without quotation marks), and then click OK.
> | > c. In the %temp% folder, look for a file or files with the name
> Microsoft
> | > Windows SharePoint Services 3.0 Setup(000n)_Task(0001).txt.
> | >
> | > 4. Compress and email me with the C:\Program Files\Microsoft
> | > Integration\Windows Small Business Server 2003\Logs folder.
> | >
> | > Hope these steps will give you some help.
> | >
> | > Thanks and have a nice day!
> | >
> | > Best regards,
> | >
> | > Terence Liu(MSFT)
> | >
> | > Microsoft CSS Online Newsgroup Support
> | >
> | > Get Secure! - www.microsoft.com/security
> | >
> | > =====================================================
> | > This newsgroup only focuses on SBS technical issues. If you have issues
> | > regarding other Microsoft products, you'd better post in the
> corresponding
> | > newsgroups so that they can be resolved in an efficient and timely
> manner.
> | > You can locate the newsgroup here:
> | > http://www.microsoft.com/communities...s/default.aspx
> | >
> | > When opening a new thread via the web interface, we recommend you check
> the
> | > "Notify me of replies" box to receive e-mail notifications when there
> are
> | > any updates in your thread. When responding to posts via your
> newsreader,
> | > please "Reply to Group" so that others may learn and benefit from your
> | > issue.
> | >
> | > Microsoft engineers can only focus on one issue per thread. Although we
> | > provide other information for your reference, we recommend you post
> | > different incidents in different threads to keep the thread clean. In
> doing
> | > so, it will ensure your issues are resolved in a timely manner.
> | >
> | > For urgent issues, you may want to contact Microsoft CSS directly.
> Please
> | > check http://support.microsoft.com for regional support phone numbers.
> | >
> | > Any input or comments in this thread are highly appreciated.
> | > =====================================================
> | >
> | > This posting is provided "AS IS" with no warranties, and confers no
> rights.
> | >
> | > --------------------
> | > | From: "Joseph A" <josephalmi@gmail.com>
> | > | Newsgroups: microsoft.public.windows.server.sbs
> | > | Subject: "Microsoft Windows SharePoint Services 3.0 setup did not
> | > complete successfully" on SBS 2003
> | > | Date: 2 Jan 2007 09:21:34 -0800
> | > | Organization: http://groups.google.com
> | > | Lines: 22
> | > | Message-ID: <1167758494.668750.145770@n51g2000cwc.googlegroups.com>
> | > | NNTP-Posting-Host: 207.59.110.74
> | > | Mime-Version: 1.0
> | > | Content-Type: text/plain; charset="iso-8859-1"
> | > | X-Trace: posting.google.com 1167758500 30714 127.0.0.1 (2 Jan 2007
> | > 17:21:40 GMT)
> | > | X-Complaints-To: groups-abuse@google.com
> | > | NNTP-Posting-Date: Tue, 2 Jan 2007 17:21:40 +0000 (UTC)
> | > | User-Agent: G2/1.0
> | > | X-HTTP-UserAgent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1;
> SV1;
> | > NET CLR 2.0.50727; .NET CLR 1.1.4322; InfoPath.1),gzip(gfe),gzip(gfe)
> | > | Complaints-To: groups-abuse@google.com
> | > | Injection-Info: n51g2000cwc.googlegroups.com;
> posting-host=207.59.110.74;
> | > | posting-account=wXaoqA0AAAAksJyiE6_iRXyc1AN8zufd
> | > | Path:
> | >
> TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS01.phx.gbl!msrtrans!
> | >
> msrn-in!newshub.sdsu.edu!postnews.google.com!n51g2000cwc.googlegroups.com!no
> | > t-for-mail
> | > | Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:7646
> | > | X-Tomcat-NG: microsoft.public.windows.server.sbs
> | > |
> | > | When installing the newest sharepoint on our SBS server, using the
> | > | official SBS-Sharepoint doc form MS, I get: "Microsoft Windows
> | > | SharePoint Services 3.0 setup did not complete successfully"
> | > |
> | > | After that, if I try to go to configuration anyway, I get the
> | > | following:
> | > |
> | > | "failed to start the database service MSSQL$MICROSOFT##SSEE. Repair
> | > | this product"
> | > |
> | > | After I do a repair, I go back into the sharepoint configuration it
> | > | still does not work and says it can't conect to a database (Don't have
> | > | the exact error at this moment).
> | > |
> | > | What can I do to successfully do a side by side installation? I was
> | > | using the doc found here:
> | > |
> | >
> http://www.microsoft.com/downloads/d...c81-efff-4f5b-
> | > a28a-8265f1e99f5b&displaylang=en
> | > |
> | > | Thank You
> | > |
> | > | Joseph
> | > |
> | > |
> |
> |

#6 08-01-2007

Hello Joseph,

Thank you for kind update.

I did not receive your email till now. Please confirm that you have sent
the mail to my working mailbox: v-terliu@microsoft.com.

Please save the MPS report as zip file and send to me again.

If you have any concerns, please feel free to let me know. I am glad to be
of assistance. :-)

Thank you and have a nice day,

Best regards,

Terence Liu(MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities...s/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.
=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------
| From: "Joseph A" <josephalmi@gmail.com>
| Newsgroups: microsoft.public.windows.server.sbs
| Subject: Re: "Microsoft Windows SharePoint Services 3.0 setup did not
complete successfully" on SBS 2003
| Date: 6 Jan 2007 23:40:19 -0800
| Organization: http://groups.google.com
| Lines: 316
| Message-ID: <1168155619.524336.216000@i15g2000cwa.googlegroups.com>
| References: <1167758494.668750.145770@n51g2000cwc.googlegroups.com>
| <1167847503.794936.254050@a3g2000cwd.googlegroups.com>
| <xb#cNG6LHHA.2304@TK2MSFTNGHUB02.phx.gbl>
| NNTP-Posting-Host: 71.246.127.212
| Mime-Version: 1.0
| Content-Type: text/plain; charset="us-ascii"
| X-Trace: posting.google.com 1168155625 24202 127.0.0.1 (7 Jan 2007
07:40:25 GMT)
| X-Complaints-To: groups-abuse@google.com
| NNTP-Posting-Date: Sun, 7 Jan 2007 07:40:25 +0000 (UTC)
| In-Reply-To: <xb#cNG6LHHA.2304@TK2MSFTNGHUB02.phx.gbl>
| User-Agent: G2/1.0
| X-HTTP-UserAgent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US;
rv:1.8.0.9) Gecko/20061206 Firefox/1.5.0.9,gzip(gfe),gzip(gfe)
| Complaints-To: groups-abuse@google.com
| Injection-Info: i15g2000cwa.googlegroups.com; posting-host=71.246.127.212;
| posting-account=wXaoqA0AAAAksJyiE6_iRXyc1AN8zufd
| Path:
TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS02.phx.gbl!msrtrans!
msrn-in!newshub.sdsu.edu!postnews.google.com!i15g2000cwa.googlegroups.com!no
t-for-mail
| Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:8652
| X-Tomcat-NG: microsoft.public.windows.server.sbs
|
| Hi Terence,
|
| Unfortunately removing then reinstalling .net as you described did not
| change the outcome. I have sent the logs and hope you can assist in
| guiding me in my next move.
|
| Thanks!
|
| Joseph
|
| Terence Liu [MSFT] wrote:
| > Hello Joseph,
| >
| > Thank you for kind update.
| >
| > There is not large difference between step 1. Please start from step 2
now.
| >
| > Note: the side by side WSS 3.0 installation document you find is great,
| > please go through the document more carefully. After reinstall the .net
| > 3.0, please perform the steps in the doucment one by one.
| >
| > Please do not hesitate to let me know if this problem reoccurs or if
| > there's anything else I can do for you.
| >
| > Thank you and have a nice day,
| >
| > Best regards,
| >
| > Terence Liu(MSFT)
| >
| > Microsoft CSS Online Newsgroup Support
| >
| > Get Secure! - www.microsoft.com/security
| >
| > =====================================================
| > This newsgroup only focuses on SBS technical issues. If you have issues
| > regarding other Microsoft products, you'd better post in the
corresponding
| > newsgroups so that they can be resolved in an efficient and timely
manner.
| > You can locate the newsgroup here:
| > http://www.microsoft.com/communities...s/default.aspx
| >
| > When opening a new thread via the web interface, we recommend you check
the
| > "Notify me of replies" box to receive e-mail notifications when there
are
| > any updates in your thread. When responding to posts via your
newsreader,
| > please "Reply to Group" so that others may learn and benefit from your
| > issue.
| >
| > Microsoft engineers can only focus on one issue per thread. Although we
| > provide other information for your reference, we recommend you post
| > different incidents in different threads to keep the thread clean. In
doing
| > so, it will ensure your issues are resolved in a timely manner.
| >
| > For urgent issues, you may want to contact Microsoft CSS directly.
Please
| > check http://support.microsoft.com for regional support phone numbers.
| >
| > Any input or comments in this thread are highly appreciated.
| > =====================================================
| >
| > This posting is provided "AS IS" with no warranties, and confers no
rights.
| >
| > --------------------
| > | From: "Joseph A" <josephalmi@gmail.com>
| > | Newsgroups: microsoft.public.windows.server.sbs
| > | Subject: Re: "Microsoft Windows SharePoint Services 3.0 setup did not
| > complete successfully" on SBS 2003
| > | Date: 3 Jan 2007 10:05:03 -0800
| > | Organization: http://groups.google.com
| > | Lines: 197
| > | Message-ID: <1167847503.794936.254050@a3g2000cwd.googlegroups.com>
| > | References: <1167758494.668750.145770@n51g2000cwc.googlegroups.com>
| > | <MZxVdcwLHHA.2080@TK2MSFTNGHUB02.phx.gbl>
| > | NNTP-Posting-Host: 71.249.220.209
| > | Mime-Version: 1.0
| > | Content-Type: text/plain; charset="us-ascii"
| > | X-Trace: posting.google.com 1167847510 8733 127.0.0.1 (3 Jan 2007
| > 18:05:10 GMT)
| > | X-Complaints-To: groups-abuse@google.com
| > | NNTP-Posting-Date: Wed, 3 Jan 2007 18:05:10 +0000 (UTC)
| > | In-Reply-To: <MZxVdcwLHHA.2080@TK2MSFTNGHUB02.phx.gbl>
| > | User-Agent: G2/1.0
| > | X-HTTP-UserAgent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US;
| > rv:1.8.1.1) Gecko/20061204 Firefox/2.0.0.1,gzip(gfe),gzip(gfe)
| > | Complaints-To: groups-abuse@google.com
| > | Injection-Info: a3g2000cwd.googlegroups.com;
posting-host=71.249.220.209;
| > | posting-account=wXaoqA0AAAAksJyiE6_iRXyc1AN8zufd
| > | Path:
| >
TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS02.phx.gbl!newsfeed.
| >
cw.net!cw.net!news-FFM2.ecrc.de!news.glorb.com!postnews.google.com!a3g2000cw
| > d.googlegroups.com!not-for-mail
| > | Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:7897
| > | X-Tomcat-NG: microsoft.public.windows.server.sbs
| > |
| > | I had already went to Add/Remove Programs and removed WSS 3.0 after it
| > | failed... will that make a large difference with the instructions you
| > | provided?
| > |
| > | Thank you for the help
| > |
| > | Joseph
| > |
| > |
| > | Terence Liu [MSFT] wrote:
| > | > Hello Joseph,
| > | >
| > | > Thank you for posting here.
| > | >
| > | > According to your description, I understand that your WSS 3.0 setup
did
| > not
| > | > complete successfully and you can not configure the WSS. If I have
| > | > misunderstood the problem, please don't hesitate to let me know.
| > | >
| > | > Based on my research, I think the installation did not complete
| > | > successfully refer to previous version of ASP.NET3.0 was not
uninstalled
| > | > properly. I suggest we try the following steps to see if we can
resolve
| > | > this issue:
| > | >
| > | > Step 1: uninstall WSS 3.0
| > | >
| > | > To delete the Windows SharePoint Services 3.0 default Web site
| > | > 1. Click Start, point to All Programs, point to Administrative
Tools,
| > and
| > | > then click SharePoint 3.0 Central Administration.
| > | >
| > | > 2. On the Application Management tab, in SharePoint Web Application
| > | > Management, click Delete Web Application.
| > | >
| > | > 3. On the Delete Web Application page, complete the following:
| > | >
| > | > a. In Web Application, from the drop-down menu, click Change Web
| > | > Application. On the Select Web Application page, select the Windows
| > | > SharePoint Services 3.0 default Web site (http://ServerName).
| > | >
| > | > Note: Make sure that you delete the default Web site
(http://ServerName)
| > | > and not the site that you just created in the preceding step.
| > | >
| > | > b. In Delete options, delete the content databases and the IIS Web
| > sites.
| > | >
| > | > c. Click Delete.
| > | >
| > | > d. In the warning message box, click Yes.
| > | >
| > | > 4. Wait for the Application Management tab to appear, and then
close the
| > | > Windows SharePoint Services Central Administration site.
| > | >
| > | > Step 2: reinstall .net 3.0
| > | >
| > | > 1. Download the following tool at link below
| > | >
| >
http://www.microsoft.com/downloads/d...C63-D405-4E13-
| > | > 909F-E85AA9E66146&displaylang=en
| > | >
| > | > 2. Run the tool to uninstall previous version .net 3.0
| > | >
| > | > 3. Please download .net 3.0 from the following link
| > | > http://go.microsoft.com/fwlink/?LinkId=77799
| > | >
| > | > 4. Then re-install .net 3.0
| > | >
| > | > Step 3: reinstall WSS 3.0
| > | >
| > | > Please go through the following document and perform the WSS 3.0
| > | > installation steps (step 2 to step 4)
| > | >
| > | >
| >
http://www.microsoft.com/downloads/d...c81-efff-4f5b-
| > | > a28a-8265f1e99f5b&displaylang=en
| > | >
| > | > Additional info:
| > | >
| > | > Windows SharePoint Services Administrator's Guide
| > | >
| >
<http://www.microsoft.com/downloads/d...eff6-8224-4b19
| > | > -a6a4-3e
| > | > 33fa13d230&DisplayLang=en>
| > | >
| > | > SharePoint Portal Server 2003 Administrator's Guide
| > | >
| >
<http://www.microsoft.com/downloads/d...5143-F586-4941
| > | > -92F5-04
| > | > 8BF00CF332&displaylang=en>
| > | >
| > | > If the issue persists, please kindly help me collect some
information
| > for
| > | > further investigation:
| > | >
| > | > 1. Please capture screenshot on the error message and send the
picture
| > to
| > | > me at v-terliu@microsoft.com
| > | >
| > | > 2. Download the Setup Edition of MPS_Report tool from
| > | >
| >
http://download.microsoft.com/downlo...5-a579-30b0bd9
| > | > 15706/MPSRPT_SETUPPerf.EXE, run it on the SBS Server. Email me the
| > | > %COMPUTERNAME%_MPSReports_.CAB file which is under the
| > | > %systemroot%\MPSReports\Setup\Lite\Cab directory.
| > | >
| > | > 3. Provide me with the WSS installation log based on the following
| > steps:
| > | > a. Click Start, and then click Run.
| > | > b. Type "%temp%" (without quotation marks), and then click OK.
| > | > c. In the %temp% folder, look for a file or files with the name
| > Microsoft
| > | > Windows SharePoint Services 3.0 Setup(000n)_Task(0001).txt.
| > | >
| > | > 4. Compress and email me with the C:\Program Files\Microsoft
| > | > Integration\Windows Small Business Server 2003\Logs folder.
| > | >
| > | > Hope these steps will give you some help.
| > | >
| > | > Thanks and have a nice day!
| > | >
| > | > Best regards,
| > | >
| > | > Terence Liu(MSFT)
| > | >
| > | > Microsoft CSS Online Newsgroup Support
| > | >
| > | > Get Secure! - www.microsoft.com/security
| > | >
| > | > =====================================================
| > | > This newsgroup only focuses on SBS technical issues. If you have
issues
| > | > regarding other Microsoft products, you'd better post in the
| > corresponding
| > | > newsgroups so that they can be resolved in an efficient and timely
| > manner.
| > | > You can locate the newsgroup here:
| > | > http://www.microsoft.com/communities...s/default.aspx
| > | >
| > | > When opening a new thread via the web interface, we recommend you
check
| > the
| > | > "Notify me of replies" box to receive e-mail notifications when
there
| > are
| > | > any updates in your thread. When responding to posts via your
| > newsreader,
| > | > please "Reply to Group" so that others may learn and benefit from
your
| > | > issue.
| > | >
| > | > Microsoft engineers can only focus on one issue per thread.
Although we
| > | > provide other information for your reference, we recommend you post
| > | > different incidents in different threads to keep the thread clean.
In
| > doing
| > | > so, it will ensure your issues are resolved in a timely manner.
| > | >
| > | > For urgent issues, you may want to contact Microsoft CSS directly.
| > Please
| > | > check http://support.microsoft.com for regional support phone
numbers.
| > | >
| > | > Any input or comments in this thread are highly appreciated.
| > | > =====================================================
| > | >
| > | > This posting is provided "AS IS" with no warranties, and confers no
| > rights.
| > | >
| > | > --------------------
| > | > | From: "Joseph A" <josephalmi@gmail.com>
| > | > | Newsgroups: microsoft.public.windows.server.sbs
| > | > | Subject: "Microsoft Windows SharePoint Services 3.0 setup did not
| > | > complete successfully" on SBS 2003
| > | > | Date: 2 Jan 2007 09:21:34 -0800
| > | > | Organization: http://groups.google.com
| > | > | Lines: 22
| > | > | Message-ID:
<1167758494.668750.145770@n51g2000cwc.googlegroups.com>
| > | > | NNTP-Posting-Host: 207.59.110.74
| > | > | Mime-Version: 1.0
| > | > | Content-Type: text/plain; charset="iso-8859-1"
| > | > | X-Trace: posting.google.com 1167758500 30714 127.0.0.1 (2 Jan 2007
| > | > 17:21:40 GMT)
| > | > | X-Complaints-To: groups-abuse@google.com
| > | > | NNTP-Posting-Date: Tue, 2 Jan 2007 17:21:40 +0000 (UTC)
| > | > | User-Agent: G2/1.0
| > | > | X-HTTP-UserAgent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT
5.1;
| > SV1;
| > | > NET CLR 2.0.50727; .NET CLR 1.1.4322;
InfoPath.1),gzip(gfe),gzip(gfe)
| > | > | Complaints-To: groups-abuse@google.com
| > | > | Injection-Info: n51g2000cwc.googlegroups.com;
| > posting-host=207.59.110.74;
| > | > | posting-account=wXaoqA0AAAAksJyiE6_iRXyc1AN8zufd
| > | > | Path:
| > | >
| >
TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS01.phx.gbl!msrtrans!
| > | >
| >
msrn-in!newshub.sdsu.edu!postnews.google.com!n51g2000cwc.googlegroups.com!no
| > | > t-for-mail
| > | > | Xref: TK2MSFTNGHUB02.phx.gbl
microsoft.public.windows.server.sbs:7646
| > | > | X-Tomcat-NG: microsoft.public.windows.server.sbs
| > | > |
| > | > | When installing the newest sharepoint on our SBS server, using the
| > | > | official SBS-Sharepoint doc form MS, I get: "Microsoft Windows
| > | > | SharePoint Services 3.0 setup did not complete successfully"
| > | > |
| > | > | After that, if I try to go to configuration anyway, I get the
| > | > | following:
| > | > |
| > | > | "failed to start the database service MSSQL$MICROSOFT##SSEE.
Repair
| > | > | this product"
| > | > |
| > | > | After I do a repair, I go back into the sharepoint configuration
it
| > | > | still does not work and says it can't conect to a database (Don't
have
| > | > | the exact error at this moment).
| > | > |
| > | > | What can I do to successfully do a side by side installation? I
was
| > | > | using the doc found here:
| > | > |
| > | >
| >
http://www.microsoft.com/downloads/d...c81-efff-4f5b-
| > | > a28a-8265f1e99f5b&displaylang=en
| > | > |
| > | > | Thank You
| > | > |
| > | > | Joseph
| > | > |
| > | > |
| > |
| > |
|
|

#7 08-01-2007

Hi Terence

I just tried sending again from a different account.. please let me
know if you don't get it, thanks!

Best Regards,

Joseph

Terence Liu [MSFT] wrote:
> Hello Joseph,
>
> Thank you for kind update.
>
> I did not receive your email till now. Please confirm that you have sent
> the mail to my working mailbox: v-terliu@microsoft.com.
>
> Please save the MPS report as zip file and send to me again.
>
> If you have any concerns, please feel free to let me know. I am glad to be
> of assistance. :-)
>
> Thank you and have a nice day,
>
> Best regards,
>
> Terence Liu(MSFT)
>
> Microsoft CSS Online Newsgroup Support
>
> Get Secure! - www.microsoft.com/security
>
> =====================================================
> This newsgroup only focuses on SBS technical issues. If you have issues
> regarding other Microsoft products, you'd better post in the corresponding
> newsgroups so that they can be resolved in an efficient and timely manner.
> You can locate the newsgroup here:
> http://www.microsoft.com/communities...s/default.aspx
>
> When opening a new thread via the web interface, we recommend you check the
> "Notify me of replies" box to receive e-mail notifications when there are
> any updates in your thread. When responding to posts via your newsreader,
> please "Reply to Group" so that others may learn and benefit from your
> issue.
>
> Microsoft engineers can only focus on one issue per thread. Although we
> provide other information for your reference, we recommend you post
> different incidents in different threads to keep the thread clean. In doing
> so, it will ensure your issues are resolved in a timely manner.
>
> For urgent issues, you may want to contact Microsoft CSS directly. Please
> check http://support.microsoft.com for regional support phone numbers.
>
> Any input or comments in this thread are highly appreciated.
> =====================================================
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
> --------------------
> | From: "Joseph A" <josephalmi@gmail.com>
> | Newsgroups: microsoft.public.windows.server.sbs
> | Subject: Re: "Microsoft Windows SharePoint Services 3.0 setup did not
> complete successfully" on SBS 2003
> | Date: 6 Jan 2007 23:40:19 -0800
> | Organization: http://groups.google.com
> | Lines: 316
> | Message-ID: <1168155619.524336.216000@i15g2000cwa.googlegroups.com>
> | References: <1167758494.668750.145770@n51g2000cwc.googlegroups.com>
> | <1167847503.794936.254050@a3g2000cwd.googlegroups.com>
> | <xb#cNG6LHHA.2304@TK2MSFTNGHUB02.phx.gbl>
> | NNTP-Posting-Host: 71.246.127.212
> | Mime-Version: 1.0
> | Content-Type: text/plain; charset="us-ascii"
> | X-Trace: posting.google.com 1168155625 24202 127.0.0.1 (7 Jan 2007
> 07:40:25 GMT)
> | X-Complaints-To: groups-abuse@google.com
> | NNTP-Posting-Date: Sun, 7 Jan 2007 07:40:25 +0000 (UTC)
> | In-Reply-To: <xb#cNG6LHHA.2304@TK2MSFTNGHUB02.phx.gbl>
> | User-Agent: G2/1.0
> | X-HTTP-UserAgent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US;
> rv:1.8.0.9) Gecko/20061206 Firefox/1.5.0.9,gzip(gfe),gzip(gfe)
> | Complaints-To: groups-abuse@google.com
> | Injection-Info: i15g2000cwa.googlegroups.com; posting-host=71.246.127.212;
> | posting-account=wXaoqA0AAAAksJyiE6_iRXyc1AN8zufd
> | Path:
> TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS02.phx.gbl!msrtrans!
> msrn-in!newshub.sdsu.edu!postnews.google.com!i15g2000cwa.googlegroups.com!no
> t-for-mail
> | Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:8652
> | X-Tomcat-NG: microsoft.public.windows.server.sbs
> |
> | Hi Terence,
> |
> | Unfortunately removing then reinstalling .net as you described did not
> | change the outcome. I have sent the logs and hope you can assist in
> | guiding me in my next move.
> |
> | Thanks!
> |
> | Joseph
> |
> | Terence Liu [MSFT] wrote:
> | > Hello Joseph,
> | >
> | > Thank you for kind update.
> | >
> | > There is not large difference between step 1. Please start from step 2
> now.
> | >
> | > Note: the side by side WSS 3.0 installation document you find is great,
> | > please go through the document more carefully. After reinstall the .net
> | > 3.0, please perform the steps in the doucment one by one.
> | >
> | > Please do not hesitate to let me know if this problem reoccurs or if
> | > there's anything else I can do for you.
> | >
> | > Thank you and have a nice day,
> | >
> | > Best regards,
> | >
> | > Terence Liu(MSFT)
> | >
> | > Microsoft CSS Online Newsgroup Support
> | >
> | > Get Secure! - www.microsoft.com/security
> | >
> | > =====================================================
> | > This newsgroup only focuses on SBS technical issues. If you have issues
> | > regarding other Microsoft products, you'd better post in the
> corresponding
> | > newsgroups so that they can be resolved in an efficient and timely
> manner.
> | > You can locate the newsgroup here:
> | > http://www.microsoft.com/communities...s/default.aspx
> | >
> | > When opening a new thread via the web interface, we recommend you check
> the
> | > "Notify me of replies" box to receive e-mail notifications when there
> are
> | > any updates in your thread. When responding to posts via your
> newsreader,
> | > please "Reply to Group" so that others may learn and benefit from your
> | > issue.
> | >
> | > Microsoft engineers can only focus on one issue per thread. Although we
> | > provide other information for your reference, we recommend you post
> | > different incidents in different threads to keep the thread clean. In
> doing
> | > so, it will ensure your issues are resolved in a timely manner.
> | >
> | > For urgent issues, you may want to contact Microsoft CSS directly.
> Please
> | > check http://support.microsoft.com for regional support phone numbers.
> | >
> | > Any input or comments in this thread are highly appreciated.
> | > =====================================================
> | >
> | > This posting is provided "AS IS" with no warranties, and confers no
> rights.
> | >
> | > --------------------
> | > | From: "Joseph A" <josephalmi@gmail.com>
> | > | Newsgroups: microsoft.public.windows.server.sbs
> | > | Subject: Re: "Microsoft Windows SharePoint Services 3.0 setup did not
> | > complete successfully" on SBS 2003
> | > | Date: 3 Jan 2007 10:05:03 -0800
> | > | Organization: http://groups.google.com
> | > | Lines: 197
> | > | Message-ID: <1167847503.794936.254050@a3g2000cwd.googlegroups.com>
> | > | References: <1167758494.668750.145770@n51g2000cwc.googlegroups.com>
> | > | <MZxVdcwLHHA.2080@TK2MSFTNGHUB02.phx.gbl>
> | > | NNTP-Posting-Host: 71.249.220.209
> | > | Mime-Version: 1.0
> | > | Content-Type: text/plain; charset="us-ascii"
> | > | X-Trace: posting.google.com 1167847510 8733 127.0.0.1 (3 Jan 2007
> | > 18:05:10 GMT)
> | > | X-Complaints-To: groups-abuse@google.com
> | > | NNTP-Posting-Date: Wed, 3 Jan 2007 18:05:10 +0000 (UTC)
> | > | In-Reply-To: <MZxVdcwLHHA.2080@TK2MSFTNGHUB02.phx.gbl>
> | > | User-Agent: G2/1.0
> | > | X-HTTP-UserAgent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US;
> | > rv:1.8.1.1) Gecko/20061204 Firefox/2.0.0.1,gzip(gfe),gzip(gfe)
> | > | Complaints-To: groups-abuse@google.com
> | > | Injection-Info: a3g2000cwd.googlegroups.com;
> posting-host=71.249.220.209;
> | > | posting-account=wXaoqA0AAAAksJyiE6_iRXyc1AN8zufd
> | > | Path:
> | >
> TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS02.phx.gbl!newsfeed.
> | >
> cw.net!cw.net!news-FFM2.ecrc.de!news.glorb.com!postnews.google.com!a3g2000cw
> | > d.googlegroups.com!not-for-mail
> | > | Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:7897
> | > | X-Tomcat-NG: microsoft.public.windows.server.sbs
> | > |
> | > | I had already went to Add/Remove Programs and removed WSS 3.0 after it
> | > | failed... will that make a large difference with the instructions you
> | > | provided?
> | > |
> | > | Thank you for the help
> | > |
> | > | Joseph
> | > |
> | > |
> | > | Terence Liu [MSFT] wrote:
> | > | > Hello Joseph,
> | > | >
> | > | > Thank you for posting here.
> | > | >
> | > | > According to your description, I understand that your WSS 3.0 setup
> did
> | > not
> | > | > complete successfully and you can not configure the WSS. If I have
> | > | > misunderstood the problem, please don't hesitate to let me know.
> | > | >
> | > | > Based on my research, I think the installation did not complete
> | > | > successfully refer to previous version of ASP.NET3.0 was not
> uninstalled
> | > | > properly. I suggest we try the following steps to see if we can
> resolve
> | > | > this issue:
> | > | >
> | > | > Step 1: uninstall WSS 3.0
> | > | >
> | > | > To delete the Windows SharePoint Services 3.0 default Web site
> | > | > 1. Click Start, point to All Programs, point to Administrative
> Tools,
> | > and
> | > | > then click SharePoint 3.0 Central Administration.
> | > | >
> | > | > 2. On the Application Management tab, in SharePoint Web Application
> | > | > Management, click Delete Web Application.
> | > | >
> | > | > 3. On the Delete Web Application page, complete the following:
> | > | >
> | > | > a. In Web Application, from the drop-down menu, click Change Web
> | > | > Application. On the Select Web Application page, select the Windows
> | > | > SharePoint Services 3.0 default Web site (http://ServerName).
> | > | >
> | > | > Note: Make sure that you delete the default Web site
> (http://ServerName)
> | > | > and not the site that you just created in the preceding step.
> | > | >
> | > | > b. In Delete options, delete the content databases and the IIS Web
> | > sites.
> | > | >
> | > | > c. Click Delete.
> | > | >
> | > | > d. In the warning message box, click Yes.
> | > | >
> | > | > 4. Wait for the Application Management tab to appear, and then
> close the
> | > | > Windows SharePoint Services Central Administration site.
> | > | >
> | > | > Step 2: reinstall .net 3.0
> | > | >
> | > | > 1. Download the following tool at link below
> | > | >
> | >
> http://www.microsoft.com/downloads/d...C63-D405-4E13-
> | > | > 909F-E85AA9E66146&displaylang=en
> | > | >
> | > | > 2. Run the tool to uninstall previous version .net 3.0
> | > | >
> | > | > 3. Please download .net 3.0 from the following link
> | > | > http://go.microsoft.com/fwlink/?LinkId=77799
> | > | >
> | > | > 4. Then re-install .net 3.0
> | > | >
> | > | > Step 3: reinstall WSS 3.0
> | > | >
> | > | > Please go through the following document and perform the WSS 3.0
> | > | > installation steps (step 2 to step 4)
> | > | >
> | > | >
> | >
> http://www.microsoft.com/downloads/d...c81-efff-4f5b-
> | > | > a28a-8265f1e99f5b&displaylang=en
> | > | >
> | > | > Additional info:
> | > | >
> | > | > Windows SharePoint Services Administrator's Guide
> | > | >
> | >
> <http://www.microsoft.com/downloads/d...eff6-8224-4b19
> | > | > -a6a4-3e
> | > | > 33fa13d230&DisplayLang=en>
> | > | >
> | > | > SharePoint Portal Server 2003 Administrator's Guide
> | > | >
> | >
> <http://www.microsoft.com/downloads/d...5143-F586-4941
> | > | > -92F5-04
> | > | > 8BF00CF332&displaylang=en>
> | > | >
> | > | > If the issue persists, please kindly help me collect some
> information
> | > for
> | > | > further investigation:
> | > | >
> | > | > 1. Please capture screenshot on the error message and send the
> picture
> | > to
> | > | > me at v-terliu@microsoft.com
> | > | >
> | > | > 2. Download the Setup Edition of MPS_Report tool from
> | > | >
> | >
> http://download.microsoft.com/downlo...5-a579-30b0bd9
> | > | > 15706/MPSRPT_SETUPPerf.EXE, run it on the SBS Server. Email me the
> | > | > %COMPUTERNAME%_MPSReports_.CAB file which is under the
> | > | > %systemroot%\MPSReports\Setup\Lite\Cab directory.
> | > | >
> | > | > 3. Provide me with the WSS installation log based on the following
> | > steps:
> | > | > a. Click Start, and then click Run.
> | > | > b. Type "%temp%" (without quotation marks), and then click OK.
> | > | > c. In the %temp% folder, look for a file or files with the name
> | > Microsoft
> | > | > Windows SharePoint Services 3.0 Setup(000n)_Task(0001).txt.
> | > | >
> | > | > 4. Compress and email me with the C:\Program Files\Microsoft
> | > | > Integration\Windows Small Business Server 2003\Logs folder.
> | > | >
> | > | > Hope these steps will give you some help.
> | > | >
> | > | > Thanks and have a nice day!
> | > | >
> | > | > Best regards,
> | > | >
> | > | > Terence Liu(MSFT)
> | > | >
> | > | > Microsoft CSS Online Newsgroup Support
> | > | >
> | > | > Get Secure! - www.microsoft.com/security
> | > | >
> | > | > =====================================================
> | > | > This newsgroup only focuses on SBS technical issues. If you have
> issues
> | > | > regarding other Microsoft products, you'd better post in the
> | > corresponding
> | > | > newsgroups so that they can be resolved in an efficient and timely
> | > manner.
> | > | > You can locate the newsgroup here:
> | > | > http://www.microsoft.com/communities...s/default.aspx
> | > | >
> | > | > When opening a new thread via the web interface, we recommend you
> check
> | > the
> | > | > "Notify me of replies" box to receive e-mail notifications when
> there
> | > are
> | > | > any updates in your thread. When responding to posts via your
> | > newsreader,
> | > | > please "Reply to Group" so that others may learn and benefit from
> your
> | > | > issue.
> | > | >
> | > | > Microsoft engineers can only focus on one issue per thread.
> Although we
> | > | > provide other information for your reference, we recommend you post
> | > | > different incidents in different threads to keep the thread clean.
> In
> | > doing
> | > | > so, it will ensure your issues are resolved in a timely manner.
> | > | >
> | > | > For urgent issues, you may want to contact Microsoft CSS directly.
> | > Please
> | > | > check http://support.microsoft.com for regional support phone
> numbers.
> | > | >
> | > | > Any input or comments in this thread are highly appreciated.
> | > | > =====================================================
> | > | >
> | > | > This posting is provided "AS IS" with no warranties, and confers no
> | > rights.
> | > | >
> | > | > --------------------
> | > | > | From: "Joseph A" <josephalmi@gmail.com>
> | > | > | Newsgroups: microsoft.public.windows.server.sbs
> | > | > | Subject: "Microsoft Windows SharePoint Services 3.0 setup did not
> | > | > complete successfully" on SBS 2003
> | > | > | Date: 2 Jan 2007 09:21:34 -0800
> | > | > | Organization: http://groups.google.com
> | > | > | Lines: 22
> | > | > | Message-ID:
> <1167758494.668750.145770@n51g2000cwc.googlegroups.com>
> | > | > | NNTP-Posting-Host: 207.59.110.74
> | > | > | Mime-Version: 1.0
> | > | > | Content-Type: text/plain; charset="iso-8859-1"
> | > | > | X-Trace: posting.google.com 1167758500 30714 127.0.0.1 (2 Jan 2007
> | > | > 17:21:40 GMT)
> | > | > | X-Complaints-To: groups-abuse@google.com
> | > | > | NNTP-Posting-Date: Tue, 2 Jan 2007 17:21:40 +0000 (UTC)
> | > | > | User-Agent: G2/1.0
> | > | > | X-HTTP-UserAgent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT
> 5.1;
> | > SV1;
> | > | > NET CLR 2.0.50727; .NET CLR 1.1.4322;
> InfoPath.1),gzip(gfe),gzip(gfe)
> | > | > | Complaints-To: groups-abuse@google.com
> | > | > | Injection-Info: n51g2000cwc.googlegroups.com;
> | > posting-host=207.59.110.74;
> | > | > | posting-account=wXaoqA0AAAAksJyiE6_iRXyc1AN8zufd
> | > | > | Path:
> | > | >
> | >
> TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS01.phx.gbl!msrtrans!
> | > | >
> | >
> msrn-in!newshub.sdsu.edu!postnews.google.com!n51g2000cwc.googlegroups.com!no
> | > | > t-for-mail
> | > | > | Xref: TK2MSFTNGHUB02.phx.gbl
> microsoft.public.windows.server.sbs:7646
> | > | > | X-Tomcat-NG: microsoft.public.windows.server.sbs
> | > | > |
> | > | > | When installing the newest sharepoint on our SBS server, using the
> | > | > | official SBS-Sharepoint doc form MS, I get: "Microsoft Windows
> | > | > | SharePoint Services 3.0 setup did not complete successfully"
> | > | > |
> | > | > | After that, if I try to go to configuration anyway, I get the
> | > | > | following:
> | > | > |
> | > | > | "failed to start the database service MSSQL$MICROSOFT##SSEE.
> Repair
> | > | > | this product"
> | > | > |
> | > | > | After I do a repair, I go back into the sharepoint configuration
> it
> | > | > | still does not work and says it can't conect to a database (Don't
> have
> | > | > | the exact error at this moment).
> | > | > |
> | > | > | What can I do to successfully do a side by side installation? I
> was
> | > | > | using the doc found here:
> | > | > |
> | > | >
> | >
> http://www.microsoft.com/downloads/d...c81-efff-4f5b-
> | > | > a28a-8265f1e99f5b&displaylang=en
> | > | > |
> | > | > | Thank You
> | > | > |
> | > | > | Joseph
> | > | > |
> | > | > |
> | > |
> | > |
> |
> |

#8 09-01-2007

Hello Joseph,

Thank you for your email.

Based on my research, I find error in your Microsoft Windows SharePoint
Services 3.0 Setup.log:

Executing command path: 'C:\Program Files\Common Files\Microsoft
Shared\SERVER12\Server Setup Controller\wrapinst.exe', args: 'timeout=2950
MsiPath=database\SSEE_10.msi'
Error: Command: 'C:\Program Files\Common Files\Microsoft
Shared\SERVER12\Server Setup Controller\wrapinst.exe' failed with error
code: 1603. Type: CommandFailed.
Error: Command: 'C:\Program Files\Common Files\Microsoft
Shared\SERVER12\Server Setup Controller\wrapinst.exe' failed with error
code: 1603. Type: CommandFailed.
Error: Command: 'C:\Program Files\Common Files\Microsoft
Shared\SERVER12\Server Setup Controller\wrapinst.exe' failed with error
code: 1603. Type: CommandFailed.
Catalyst execution finished: 01/06/2007 22:35:39. Return code: 30008.
Exception caught: CommandFailed.

This issue occurs may because the language version of MSXML 6.0 does not
match the language version of WSS 3.0.

To resolve this issue, install the same language version of MSXML 6.0 and
WSS 3.0.

1. Download right language version of MSXML 6.0 for the following link:

Microsoft Core XML Services (MSXML) 6.0
http://www.microsoft.com/downloads/d...BCF-3BCF-4009-
BE21-27E85E1857B1&displaylang=en

2. Please remove WSS 3.0 form SBS again

3. Please remove .net 3.0 from SBS again

4. Please empty the folder C:\Documents and Settings\UserName\Local
Settings\Temp

5. Restart the SBS, press F8 and enter Safe Mode.

6. Install the MSXML 6.0

7. Install the .net 3.0

8. Install the WSS 3.0 again.

Is it fine? If not, please go to the following:

1. Set QMEnable to 0 under "Software\Microsoft\Shared Tools\Web Server
Extensions\12.0\WSS\Diagnostics"

2. Rerun the WSS 3.0 setup.

If the issue persists, please kindly help me collect whole logs again for
further investigation

Hope these steps will give you some help.

Thanks and have a nice day!

Best regards,

Terence Liu(MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities...s/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.
=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------
| From: "Joseph A" <josephalmi@gmail.com>
| Newsgroups: microsoft.public.windows.server.sbs
| Subject: Re: "Microsoft Windows SharePoint Services 3.0 setup did not
complete successfully" on SBS 2003
| Date: 8 Jan 2007 09:06:21 -0800
| Organization: http://groups.google.com
| Lines: 452
| Message-ID: <1168275981.520190.4040@42g2000cwt.googlegroups.com>
| References: <1167758494.668750.145770@n51g2000cwc.googlegroups.com>
| <1168155619.524336.216000@i15g2000cwa.googlegroups.com>
| <LqS3oIwMHHA.2080@TK2MSFTNGHUB02.phx.gbl>
| NNTP-Posting-Host: 71.249.220.209
| Mime-Version: 1.0
| Content-Type: text/plain; charset="us-ascii"
| X-Trace: posting.google.com 1168275995 22120 127.0.0.1 (8 Jan 2007
17:06:35 GMT)
| X-Complaints-To: groups-abuse@google.com
| NNTP-Posting-Date: Mon, 8 Jan 2007 17:06:35 +0000 (UTC)
| In-Reply-To: <LqS3oIwMHHA.2080@TK2MSFTNGHUB02.phx.gbl>
| User-Agent: G2/1.0
| X-HTTP-UserAgent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US;
rv:1.8.1.1) Gecko/20061204 Firefox/2.0.0.1,gzip(gfe),gzip(gfe)
| Complaints-To: groups-abuse@google.com
| Injection-Info: 42g2000cwt.googlegroups.com; posting-host=71.249.220.209;
| posting-account=wXaoqA0AAAAksJyiE6_iRXyc1AN8zufd
| Path:
TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS01.phx.gbl!newsfeed0
0.sul.t-online.de!t-online.de!border2.nntp.dca.giganews.com!border1.nntp.dca
.giganews.com!nntp.giganews.com!postnews.google.com!42g2000cwt.googlegroups.
com!not-for-mail
| Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:8889
| X-Tomcat-NG: microsoft.public.windows.server.sbs
|
| Hi Terence
|
| I just tried sending again from a different account.. please let me
| know if you don't get it, thanks!
|
| Best Regards,
|
| Joseph
|
| Terence Liu [MSFT] wrote:
| > Hello Joseph,
| >
| > Thank you for kind update.
| >
| > I did not receive your email till now. Please confirm that you have sent
| > the mail to my working mailbox: v-terliu@microsoft.com.
| >
| > Please save the MPS report as zip file and send to me again.
| >
| > If you have any concerns, please feel free to let me know. I am glad to
be
| > of assistance. :-)
| >
| > Thank you and have a nice day,
| >
| > Best regards,
| >
| > Terence Liu(MSFT)
| >
| > Microsoft CSS Online Newsgroup Support
| >
| > Get Secure! - www.microsoft.com/security
| >
| > =====================================================
| > This newsgroup only focuses on SBS technical issues. If you have issues
| > regarding other Microsoft products, you'd better post in the
corresponding
| > newsgroups so that they can be resolved in an efficient and timely
manner.
| > You can locate the newsgroup here:
| > http://www.microsoft.com/communities...s/default.aspx
| >
| > When opening a new thread via the web interface, we recommend you check
the
| > "Notify me of replies" box to receive e-mail notifications when there
are
| > any updates in your thread. When responding to posts via your
newsreader,
| > please "Reply to Group" so that others may learn and benefit from your
| > issue.
| >
| > Microsoft engineers can only focus on one issue per thread. Although we
| > provide other information for your reference, we recommend you post
| > different incidents in different threads to keep the thread clean. In
doing
| > so, it will ensure your issues are resolved in a timely manner.
| >
| > For urgent issues, you may want to contact Microsoft CSS directly.
Please
| > check http://support.microsoft.com for regional support phone numbers.
| >
| > Any input or comments in this thread are highly appreciated.
| > =====================================================
| >
| > This posting is provided "AS IS" with no warranties, and confers no
rights.
| >
| > --------------------
| > | From: "Joseph A" <josephalmi@gmail.com>
| > | Newsgroups: microsoft.public.windows.server.sbs
| > | Subject: Re: "Microsoft Windows SharePoint Services 3.0 setup did not
| > complete successfully" on SBS 2003
| > | Date: 6 Jan 2007 23:40:19 -0800
| > | Organization: http://groups.google.com
| > | Lines: 316
| > | Message-ID: <1168155619.524336.216000@i15g2000cwa.googlegroups.com>
| > | References: <1167758494.668750.145770@n51g2000cwc.googlegroups.com>
| > | <1167847503.794936.254050@a3g2000cwd.googlegroups.com>
| > | <xb#cNG6LHHA.2304@TK2MSFTNGHUB02.phx.gbl>
| > | NNTP-Posting-Host: 71.246.127.212
| > | Mime-Version: 1.0
| > | Content-Type: text/plain; charset="us-ascii"
| > | X-Trace: posting.google.com 1168155625 24202 127.0.0.1 (7 Jan 2007
| > 07:40:25 GMT)
| > | X-Complaints-To: groups-abuse@google.com
| > | NNTP-Posting-Date: Sun, 7 Jan 2007 07:40:25 +0000 (UTC)
| > | In-Reply-To: <xb#cNG6LHHA.2304@TK2MSFTNGHUB02.phx.gbl>
| > | User-Agent: G2/1.0
| > | X-HTTP-UserAgent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US;
| > rv:1.8.0.9) Gecko/20061206 Firefox/1.5.0.9,gzip(gfe),gzip(gfe)
| > | Complaints-To: groups-abuse@google.com
| > | Injection-Info: i15g2000cwa.googlegroups.com;
posting-host=71.246.127.212;
| > | posting-account=wXaoqA0AAAAksJyiE6_iRXyc1AN8zufd
| > | Path:
| >
TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS02.phx.gbl!msrtrans!
| >
msrn-in!newshub.sdsu.edu!postnews.google.com!i15g2000cwa.googlegroups.com!no
| > t-for-mail
| > | Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:8652
| > | X-Tomcat-NG: microsoft.public.windows.server.sbs
| > |
| > | Hi Terence,
| > |
| > | Unfortunately removing then reinstalling .net as you described did not
| > | change the outcome. I have sent the logs and hope you can assist in
| > | guiding me in my next move.
| > |
| > | Thanks!
| > |
| > | Joseph
| > |
| > | Terence Liu [MSFT] wrote:
| > | > Hello Joseph,
| > | >
| > | > Thank you for kind update.
| > | >
| > | > There is not large difference between step 1. Please start from
step 2
| > now.
| > | >
| > | > Note: the side by side WSS 3.0 installation document you find is
great,
| > | > please go through the document more carefully. After reinstall the
.net
| > | > 3.0, please perform the steps in the doucment one by one.
| > | >
| > | > Please do not hesitate to let me know if this problem reoccurs or if
| > | > there's anything else I can do for you.
| > | >
| > | > Thank you and have a nice day,
| > | >
| > | > Best regards,
| > | >
| > | > Terence Liu(MSFT)
| > | >
| > | > Microsoft CSS Online Newsgroup Support
| > | >
| > | > Get Secure! - www.microsoft.com/security
| > | >
| > | > =====================================================
| > | > This newsgroup only focuses on SBS technical issues. If you have
issues
| > | > regarding other Microsoft products, you'd better post in the
| > corresponding
| > | > newsgroups so that they can be resolved in an efficient and timely
| > manner.
| > | > You can locate the newsgroup here:
| > | > http://www.microsoft.com/communities...s/default.aspx
| > | >
| > | > When opening a new thread via the web interface, we recommend you
check
| > the
| > | > "Notify me of replies" box to receive e-mail notifications when
there
| > are
| > | > any updates in your thread. When responding to posts via your
| > newsreader,
| > | > please "Reply to Group" so that others may learn and benefit from
your
| > | > issue.
| > | >
| > | > Microsoft engineers can only focus on one issue per thread.
Although we
| > | > provide other information for your reference, we recommend you post
| > | > different incidents in different threads to keep the thread clean.
In
| > doing
| > | > so, it will ensure your issues are resolved in a timely manner.
| > | >
| > | > For urgent issues, you may want to contact Microsoft CSS directly.
| > Please
| > | > check http://support.microsoft.com for regional support phone
numbers.
| > | >
| > | > Any input or comments in this thread are highly appreciated.
| > | > =====================================================
| > | >
| > | > This posting is provided "AS IS" with no warranties, and confers no
| > rights.
| > | >
| > | > --------------------
| > | > | From: "Joseph A" <josephalmi@gmail.com>
| > | > | Newsgroups: microsoft.public.windows.server.sbs
| > | > | Subject: Re: "Microsoft Windows SharePoint Services 3.0 setup did
not
| > | > complete successfully" on SBS 2003
| > | > | Date: 3 Jan 2007 10:05:03 -0800
| > | > | Organization: http://groups.google.com
| > | > | Lines: 197
| > | > | Message-ID: <1167847503.794936.254050@a3g2000cwd.googlegroups.com>
| > | > | References:
<1167758494.668750.145770@n51g2000cwc.googlegroups.com>
| > | > | <MZxVdcwLHHA.2080@TK2MSFTNGHUB02.phx.gbl>
| > | > | NNTP-Posting-Host: 71.249.220.209
| > | > | Mime-Version: 1.0
| > | > | Content-Type: text/plain; charset="us-ascii"
| > | > | X-Trace: posting.google.com 1167847510 8733 127.0.0.1 (3 Jan 2007
| > | > 18:05:10 GMT)
| > | > | X-Complaints-To: groups-abuse@google.com
| > | > | NNTP-Posting-Date: Wed, 3 Jan 2007 18:05:10 +0000 (UTC)
| > | > | In-Reply-To: <MZxVdcwLHHA.2080@TK2MSFTNGHUB02.phx.gbl>
| > | > | User-Agent: G2/1.0
| > | > | X-HTTP-UserAgent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US;
| > | > rv:1.8.1.1) Gecko/20061204 Firefox/2.0.0.1,gzip(gfe),gzip(gfe)
| > | > | Complaints-To: groups-abuse@google.com
| > | > | Injection-Info: a3g2000cwd.googlegroups.com;
| > posting-host=71.249.220.209;
| > | > | posting-account=wXaoqA0AAAAksJyiE6_iRXyc1AN8zufd
| > | > | Path:
| > | >
| >
TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS02.phx.gbl!newsfeed.
| > | >
| >
cw.net!cw.net!news-FFM2.ecrc.de!news.glorb.com!postnews.google.com!a3g2000cw
| > | > d.googlegroups.com!not-for-mail
| > | > | Xref: TK2MSFTNGHUB02.phx.gbl
microsoft.public.windows.server.sbs:7897
| > | > | X-Tomcat-NG: microsoft.public.windows.server.sbs
| > | > |
| > | > | I had already went to Add/Remove Programs and removed WSS 3.0
after it
| > | > | failed... will that make a large difference with the instructions
you
| > | > | provided?
| > | > |
| > | > | Thank you for the help
| > | > |
| > | > | Joseph
| > | > |
| > | > |
| > | > | Terence Liu [MSFT] wrote:
| > | > | > Hello Joseph,
| > | > | >
| > | > | > Thank you for posting here.
| > | > | >
| > | > | > According to your description, I understand that your WSS 3.0
setup
| > did
| > | > not
| > | > | > complete successfully and you can not configure the WSS. If I
have
| > | > | > misunderstood the problem, please don't hesitate to let me know.
| > | > | >
| > | > | > Based on my research, I think the installation did not complete
| > | > | > successfully refer to previous version of ASP.NET3.0 was not
| > uninstalled
| > | > | > properly. I suggest we try the following steps to see if we can
| > resolve
| > | > | > this issue:
| > | > | >
| > | > | > Step 1: uninstall WSS 3.0
| > | > | >
| > | > | > To delete the Windows SharePoint Services 3.0 default Web site
| > | > | > 1. Click Start, point to All Programs, point to Administrative
| > Tools,
| > | > and
| > | > | > then click SharePoint 3.0 Central Administration.
| > | > | >
| > | > | > 2. On the Application Management tab, in SharePoint Web
Application
| > | > | > Management, click Delete Web Application.
| > | > | >
| > | > | > 3. On the Delete Web Application page, complete the following:
| > | > | >
| > | > | > a. In Web Application, from the drop-down menu, click Change Web
| > | > | > Application. On the Select Web Application page, select the
Windows
| > | > | > SharePoint Services 3.0 default Web site (http://ServerName).
| > | > | >
| > | > | > Note: Make sure that you delete the default Web site
| > (http://ServerName)
| > | > | > and not the site that you just created in the preceding step.
| > | > | >
| > | > | > b. In Delete options, delete the content databases and the IIS
Web
| > | > sites.
| > | > | >
| > | > | > c. Click Delete.
| > | > | >
| > | > | > d. In the warning message box, click Yes.
| > | > | >
| > | > | > 4. Wait for the Application Management tab to appear, and then
| > close the
| > | > | > Windows SharePoint Services Central Administration site.
| > | > | >
| > | > | > Step 2: reinstall .net 3.0
| > | > | >
| > | > | > 1. Download the following tool at link below
| > | > | >
| > | >
| >
http://www.microsoft.com/downloads/d...C63-D405-4E13-
| > | > | > 909F-E85AA9E66146&displaylang=en
| > | > | >
| > | > | > 2. Run the tool to uninstall previous version .net 3.0
| > | > | >
| > | > | > 3. Please download .net 3.0 from the following link
| > | > | > http://go.microsoft.com/fwlink/?LinkId=77799
| > | > | >
| > | > | > 4. Then re-install .net 3.0
| > | > | >
| > | > | > Step 3: reinstall WSS 3.0
| > | > | >
| > | > | > Please go through the following document and perform the WSS 3.0
| > | > | > installation steps (step 2 to step 4)
| > | > | >
| > | > | >
| > | >
| >
http://www.microsoft.com/downloads/d...c81-efff-4f5b-
| > | > | > a28a-8265f1e99f5b&displaylang=en
| > | > | >
| > | > | > Additional info:
| > | > | >
| > | > | > Windows SharePoint Services Administrator's Guide
| > | > | >
| > | >
| >
<http://www.microsoft.com/downloads/d...eff6-8224-4b19
| > | > | > -a6a4-3e
| > | > | > 33fa13d230&DisplayLang=en>
| > | > | >
| > | > | > SharePoint Portal Server 2003 Administrator's Guide
| > | > | >
| > | >
| >
<http://www.microsoft.com/downloads/d...5143-F586-4941
| > | > | > -92F5-04
| > | > | > 8BF00CF332&displaylang=en>
| > | > | >
| > | > | > If the issue persists, please kindly help me collect some
| > information
| > | > for
| > | > | > further investigation:
| > | > | >
| > | > | > 1. Please capture screenshot on the error message and send the
| > picture
| > | > to
| > | > | > me at v-terliu@microsoft.com
| > | > | >
| > | > | > 2. Download the Setup Edition of MPS_Report tool from
| > | > | >
| > | >
| >
http://download.microsoft.com/downlo...5-a579-30b0bd9
| > | > | > 15706/MPSRPT_SETUPPerf.EXE, run it on the SBS Server. Email me
the
| > | > | > %COMPUTERNAME%_MPSReports_.CAB file which is under the
| > | > | > %systemroot%\MPSReports\Setup\Lite\Cab directory.
| > | > | >
| > | > | > 3. Provide me with the WSS installation log based on the
following
| > | > steps:
| > | > | > a. Click Start, and then click Run.
| > | > | > b. Type "%temp%" (without quotation marks), and then click OK.
| > | > | > c. In the %temp% folder, look for a file or files with the name
| > | > Microsoft
| > | > | > Windows SharePoint Services 3.0 Setup(000n)_Task(0001).txt.
| > | > | >
| > | > | > 4. Compress and email me with the C:\Program Files\Microsoft
| > | > | > Integration\Windows Small Business Server 2003\Logs folder.
| > | > | >
| > | > | > Hope these steps will give you some help.
| > | > | >
| > | > | > Thanks and have a nice day!
| > | > | >
| > | > | > Best regards,
| > | > | >
| > | > | > Terence Liu(MSFT)
| > | > | >
| > | > | > Microsoft CSS Online Newsgroup Support
| > | > | >
| > | > | > Get Secure! - www.microsoft.com/security
| > | > | >
| > | > | > =====================================================
| > | > | > This newsgroup only focuses on SBS technical issues. If you have
| > issues
| > | > | > regarding other Microsoft products, you'd better post in the
| > | > corresponding
| > | > | > newsgroups so that they can be resolved in an efficient and
timely
| > | > manner.
| > | > | > You can locate the newsgroup here:
| > | > | >
http://www.microsoft.com/communities...s/default.aspx
| > | > | >
| > | > | > When opening a new thread via the web interface, we recommend
you
| > check
| > | > the
| > | > | > "Notify me of replies" box to receive e-mail notifications when
| > there
| > | > are
| > | > | > any updates in your thread. When responding to posts via your
| > | > newsreader,
| > | > | > please "Reply to Group" so that others may learn and benefit
from
| > your
| > | > | > issue.
| > | > | >
| > | > | > Microsoft engineers can only focus on one issue per thread.
| > Although we
| > | > | > provide other information for your reference, we recommend you
post
| > | > | > different incidents in different threads to keep the thread
clean.
| > In
| > | > doing
| > | > | > so, it will ensure your issues are resolved in a timely manner.
| > | > | >
| > | > | > For urgent issues, you may want to contact Microsoft CSS
directly.
| > | > Please
| > | > | > check http://support.microsoft.com for regional support phone
| > numbers.
| > | > | >
| > | > | > Any input or comments in this thread are highly appreciated.
| > | > | > =====================================================
| > | > | >
| > | > | > This posting is provided "AS IS" with no warranties, and
confers no
| > | > rights.
| > | > | >
| > | > | > --------------------
| > | > | > | From: "Joseph A" <josephalmi@gmail.com>
| > | > | > | Newsgroups: microsoft.public.windows.server.sbs
| > | > | > | Subject: "Microsoft Windows SharePoint Services 3.0 setup did
not
| > | > | > complete successfully" on SBS 2003
| > | > | > | Date: 2 Jan 2007 09:21:34 -0800
| > | > | > | Organization: http://groups.google.com
| > | > | > | Lines: 22
| > | > | > | Message-ID:
| > <1167758494.668750.145770@n51g2000cwc.googlegroups.com>
| > | > | > | NNTP-Posting-Host: 207.59.110.74
| > | > | > | Mime-Version: 1.0
| > | > | > | Content-Type: text/plain; charset="iso-8859-1"
| > | > | > | X-Trace: posting.google.com 1167758500 30714 127.0.0.1 (2 Jan
2007
| > | > | > 17:21:40 GMT)
| > | > | > | X-Complaints-To: groups-abuse@google.com
| > | > | > | NNTP-Posting-Date: Tue, 2 Jan 2007 17:21:40 +0000 (UTC)
| > | > | > | User-Agent: G2/1.0
| > | > | > | X-HTTP-UserAgent: Mozilla/4.0 (compatible; MSIE 6.0; Windows
NT
| > 5.1;
| > | > SV1;
| > | > | > NET CLR 2.0.50727; .NET CLR 1.1.4322;
| > InfoPath.1),gzip(gfe),gzip(gfe)
| > | > | > | Complaints-To: groups-abuse@google.com
| > | > | > | Injection-Info: n51g2000cwc.googlegroups.com;
| > | > posting-host=207.59.110.74;
| > | > | > | posting-account=wXaoqA0AAAAksJyiE6_iRXyc1AN8zufd
| > | > | > | Path:
| > | > | >
| > | >
| >
TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS01.phx.gbl!msrtrans!
| > | > | >
| > | >
| >
msrn-in!newshub.sdsu.edu!postnews.google.com!n51g2000cwc.googlegroups.com!no
| > | > | > t-for-mail
| > | > | > | Xref: TK2MSFTNGHUB02.phx.gbl
| > microsoft.public.windows.server.sbs:7646
| > | > | > | X-Tomcat-NG: microsoft.public.windows.server.sbs
| > | > | > |
| > | > | > | When installing the newest sharepoint on our SBS server,
using the
| > | > | > | official SBS-Sharepoint doc form MS, I get: "Microsoft Windows
| > | > | > | SharePoint Services 3.0 setup did not complete successfully"
| > | > | > |
| > | > | > | After that, if I try to go to configuration anyway, I get the
| > | > | > | following:
| > | > | > |
| > | > | > | "failed to start the database service MSSQL$MICROSOFT##SSEE.
| > Repair
| > | > | > | this product"
| > | > | > |
| > | > | > | After I do a repair, I go back into the sharepoint
configuration
| > it
| > | > | > | still does not work and says it can't conect to a database
(Don't
| > have
| > | > | > | the exact error at this moment).
| > | > | > |
| > | > | > | What can I do to successfully do a side by side installation?
I
| > was
| > | > | > | using the doc found here:
| > | > | > |
| > | > | >
| > | >
| >
http://www.microsoft.com/downloads/d...c81-efff-4f5b-
| > | > | > a28a-8265f1e99f5b&displaylang=en
| > | > | > |
| > | > | > | Thank You
| > | > | > |
| > | > | > | Joseph
| > | > | > |
| > | > | > |
| > | > |
| > | > |
| > |
| > |
|
|

#9 10-01-2007

Hi Joseph,

Sorry but I have a bad english.

Few time a ago I have the same error, when I reinstall WSS 3.0.
Between installation I have desinstall little SQL 2005, and install SQL
2005 full version.

I read this post and follow all step that say Terence, but the error
follow.

Then I probe the last chance. In the server console, with the WSS 3.0
intall but not configurated I execute the psconfig command line in this
order (please read the helpof this command)

1. configdb
2. helpcollections
3. secureresources
4. services
5. installfeatures
6. adminvs
7. evalprovision (sólo para las instalaciones independientes)
8. applicationcontent

This configurate de WSS 3.0 in manual mode.

Joseph A ha escrito:

> When installing the newest sharepoint on our SBS server, using the
> official SBS-Sharepoint doc form MS, I get: "Microsoft Windows
> SharePoint Services 3.0 setup did not complete successfully"
>
> After that, if I try to go to configuration anyway, I get the
> following:
>
> "failed to start the database service MSSQL$MICROSOFT##SSEE. Repair
> this product"
>
> After I do a repair, I go back into the sharepoint configuration it
> still does not work and says it can't conect to a database (Don't have
> the exact error at this moment).
>
> What can I do to successfully do a side by side installation? I was
> using the doc found here:
> http://www.microsoft.com/downloads/d...displaylang=en
>
> Thank You
>
> Joseph

#10 10-01-2007

Thanks Terence,

I'll be giving this a shot on Friday evening. I will let you know how
it goes.

Best Regards,

Joseph

Joseph A wrote:
> When installing the newest sharepoint on our SBS server, using the
> official SBS-Sharepoint doc form MS, I get: "Microsoft Windows
> SharePoint Services 3.0 setup did not complete successfully"
>
> After that, if I try to go to configuration anyway, I get the
> following:
>
> "failed to start the database service MSSQL$MICROSOFT##SSEE. Repair
> this product"
>
> After I do a repair, I go back into the sharepoint configuration it
> still does not work and says it can't conect to a database (Don't have
> the exact error at this moment).
>
> What can I do to successfully do a side by side installation? I was
> using the doc found here:
> http://www.microsoft.com/downloads/d...displaylang=en
>
> Thank You
>
> Joseph

#11 10-01-2007

Thank you slambrisca,

If what Terence gave me does not work, I will definitely give your
instructions a shot! Thank you very much for giving me some of your
insight!

Joseph

slambrisca wrote:
> Hi Joseph,
>
> Sorry but I have a bad english.
>
> Few time a ago I have the same error, when I reinstall WSS 3.0.
> Between installation I have desinstall little SQL 2005, and install SQL
> 2005 full version.
>
> I read this post and follow all step that say Terence, but the error
> follow.
>
> Then I probe the last chance. In the server console, with the WSS 3.0
> intall but not configurated I execute the psconfig command line in this
> order (please read the helpof this command)
>
> 1. configdb
> 2. helpcollections
> 3. secureresources
> 4. services
> 5. installfeatures
> 6. adminvs
> 7. evalprovision (sólo para las instalaciones independientes)
> 8. applicationcontent
>
> This configurate de WSS 3.0 in manual mode.
>
>
> Joseph A ha escrito:
>
> > When installing the newest sharepoint on our SBS server, using the
> > official SBS-Sharepoint doc form MS, I get: "Microsoft Windows
> > SharePoint Services 3.0 setup did not complete successfully"
> >
> > After that, if I try to go to configuration anyway, I get the
> > following:
> >
> > "failed to start the database service MSSQL$MICROSOFT##SSEE. Repair
> > this product"
> >
> > After I do a repair, I go back into the sharepoint configuration it
> > still does not work and says it can't conect to a database (Don't have
> > the exact error at this moment).
> >
> > What can I do to successfully do a side by side installation? I was
> > using the doc found here:
> > http://www.microsoft.com/downloads/d...displaylang=en
> >
> > Thank You
> >
> > Joseph

#12 11-01-2007

Hello Joseph,

Thank you for kind update.

I was just writing to say that I hope everything is going well.

Please do not hesitate to let me know if there's anything else I can do for
you.

Thank you and have a nice day,

Best regards,

Terence Liu(MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities...s/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.
=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------
| From: "Joseph A" <josephalmi@gmail.com>
| Newsgroups: microsoft.public.windows.server.sbs
| Subject: Re: "Microsoft Windows SharePoint Services 3.0 setup did not
complete successfully" on SBS 2003
| Date: 10 Jan 2007 06:26:06 -0800
| Organization: http://groups.google.com
| Lines: 32
| Message-ID: <1168439166.576008.27410@k58g2000hse.googlegroups.com>
| References: <1167758494.668750.145770@n51g2000cwc.googlegroups.com>
| NNTP-Posting-Host: 207.59.110.74
| Mime-Version: 1.0
| Content-Type: text/plain; charset="us-ascii"
| X-Trace: posting.google.com 1168439168 22673 127.0.0.1 (10 Jan 2007
14:26:08 GMT)
| X-Complaints-To: groups-abuse@google.com
| NNTP-Posting-Date: Wed, 10 Jan 2007 14:26:08 +0000 (UTC)
| In-Reply-To: <1167758494.668750.145770@n51g2000cwc.googlegroups.com>
| User-Agent: G2/1.0
| X-HTTP-UserAgent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US;
rv:1.8.1.1) Gecko/20061204 Firefox/2.0.0.1,gzip(gfe),gzip(gfe)
| Complaints-To: groups-abuse@google.com
| Injection-Info: k58g2000hse.googlegroups.com; posting-host=207.59.110.74;
| posting-account=wXaoqA0AAAAksJyiE6_iRXyc1AN8zufd
| Path:
TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS02.phx.gbl!news-out.
cwix.com!newsfeed.cwix.com!newscon02.news.prodigy.net!prodigy.net!border1.nn
tp.dca.giganews.com!nntp.giganews.com!postnews.google.com!k58g2000hse.google
groups.com!not-for-mail
| Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:9327
| X-Tomcat-NG: microsoft.public.windows.server.sbs
|
| Thanks Terence,
|
| I'll be giving this a shot on Friday evening. I will let you know how
| it goes.
|
| Best Regards,
|
| Joseph
|
| Joseph A wrote:
| > When installing the newest sharepoint on our SBS server, using the
| > official SBS-Sharepoint doc form MS, I get: "Microsoft Windows
| > SharePoint Services 3.0 setup did not complete successfully"
| >
| > After that, if I try to go to configuration anyway, I get the
| > following:
| >
| > "failed to start the database service MSSQL$MICROSOFT##SSEE. Repair
| > this product"
| >
| > After I do a repair, I go back into the sharepoint configuration it
| > still does not work and says it can't conect to a database (Don't have
| > the exact error at this moment).
| >
| > What can I do to successfully do a side by side installation? I was
| > using the doc found here:
| >
http://www.microsoft.com/downloads/d...c81-efff-4f5b-
a28a-8265f1e99f5b&displaylang=en
| >
| > Thank You
| >
| > Joseph
|
|

#13 18-01-2007

Hi Terence

I was not able to install anything in safe mode (that is what I believe
was implied by your instructions), it said that it could not access the
installer service?

Anyway, I reinstalled the the applications you specified while in
windows and got the same error. I will be producing the logs the next
opportunity I have (soon).

Best Regards,

Joseph

Terence Liu [MSFT] wrote:
> Hello Joseph,
>
> Thank you for kind update.
>
> I was just writing to say that I hope everything is going well.
>
> Please do not hesitate to let me know if there's anything else I can do for
> you.
>
> Thank you and have a nice day,
>
> Best regards,
>
> Terence Liu(MSFT)
>
> Microsoft CSS Online Newsgroup Support
>
> Get Secure! - www.microsoft.com/security
>
> =====================================================
> This newsgroup only focuses on SBS technical issues. If you have issues
> regarding other Microsoft products, you'd better post in the corresponding
> newsgroups so that they can be resolved in an efficient and timely manner.
> You can locate the newsgroup here:
> http://www.microsoft.com/communities...s/default.aspx
>
> When opening a new thread via the web interface, we recommend you check the
> "Notify me of replies" box to receive e-mail notifications when there are
> any updates in your thread. When responding to posts via your newsreader,
> please "Reply to Group" so that others may learn and benefit from your
> issue.
>
> Microsoft engineers can only focus on one issue per thread. Although we
> provide other information for your reference, we recommend you post
> different incidents in different threads to keep the thread clean. In doing
> so, it will ensure your issues are resolved in a timely manner.
>
> For urgent issues, you may want to contact Microsoft CSS directly. Please
> check http://support.microsoft.com for regional support phone numbers.
>
> Any input or comments in this thread are highly appreciated.
> =====================================================
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
> --------------------
> | From: "Joseph A" <josephalmi@gmail.com>
> | Newsgroups: microsoft.public.windows.server.sbs
> | Subject: Re: "Microsoft Windows SharePoint Services 3.0 setup did not
> complete successfully" on SBS 2003
> | Date: 10 Jan 2007 06:26:06 -0800
> | Organization: http://groups.google.com
> | Lines: 32
> | Message-ID: <1168439166.576008.27410@k58g2000hse.googlegroups.com>
> | References: <1167758494.668750.145770@n51g2000cwc.googlegroups.com>
> | NNTP-Posting-Host: 207.59.110.74
> | Mime-Version: 1.0
> | Content-Type: text/plain; charset="us-ascii"
> | X-Trace: posting.google.com 1168439168 22673 127.0.0.1 (10 Jan 2007
> 14:26:08 GMT)
> | X-Complaints-To: groups-abuse@google.com
> | NNTP-Posting-Date: Wed, 10 Jan 2007 14:26:08 +0000 (UTC)
> | In-Reply-To: <1167758494.668750.145770@n51g2000cwc.googlegroups.com>
> | User-Agent: G2/1.0
> | X-HTTP-UserAgent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US;
> rv:1.8.1.1) Gecko/20061204 Firefox/2.0.0.1,gzip(gfe),gzip(gfe)
> | Complaints-To: groups-abuse@google.com
> | Injection-Info: k58g2000hse.googlegroups.com; posting-host=207.59.110.74;
> | posting-account=wXaoqA0AAAAksJyiE6_iRXyc1AN8zufd
> | Path:
> TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS02.phx.gbl!news-out.
> cwix.com!newsfeed.cwix.com!newscon02.news.prodigy.net!prodigy.net!border1.nn
> tp.dca.giganews.com!nntp.giganews.com!postnews.google.com!k58g2000hse.google
> groups.com!not-for-mail
> | Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:9327
> | X-Tomcat-NG: microsoft.public.windows.server.sbs
> |
> | Thanks Terence,
> |
> | I'll be giving this a shot on Friday evening. I will let you know how
> | it goes.
> |
> | Best Regards,
> |
> | Joseph
> |
> | Joseph A wrote:
> | > When installing the newest sharepoint on our SBS server, using the
> | > official SBS-Sharepoint doc form MS, I get: "Microsoft Windows
> | > SharePoint Services 3.0 setup did not complete successfully"
> | >
> | > After that, if I try to go to configuration anyway, I get the
> | > following:
> | >
> | > "failed to start the database service MSSQL$MICROSOFT##SSEE. Repair
> | > this product"
> | >
> | > After I do a repair, I go back into the sharepoint configuration it
> | > still does not work and says it can't conect to a database (Don't have
> | > the exact error at this moment).
> | >
> | > What can I do to successfully do a side by side installation? I was
> | > using the doc found here:
> | >
> http://www.microsoft.com/downloads/d...c81-efff-4f5b-
> a28a-8265f1e99f5b&displaylang=en
> | >
> | > Thank You
> | >
> | > Joseph
> |
> |

#14 18-01-2007

Hello Joseph,

Thank you for update.

You can not success install anything in safe mode may because the Windows
Installer service is not started.

Manually started the services related to installation in safe mode
----------------------------
1. Click Start, click Run, type "services.msc" (without the quotation
marks) in the Open box, and then click OK
2. Find Windows Installer Service. Right-click each of them and select Start

Then try to install the software as the steps in my previous reply.

If you still can not install software in safe mode, please try to do a
clean boot:

To clean boot the problematic computer, please use the steps below:
a. Click Start, click Run, and then in the Open box, type "MSCONFIG"
(without the quotation marks). Click OK.

b. In the System Configuration Utility (MSConfig) window, click to select
the Selective Startup button.

c. Click to clear the check mark from the "Load startup items" below
Selective Startup.

d. Click the Services tab, click to check the "Hide All Microsoft Services"
box, and remove all the check marks from the remained Non-Microsoft
Services. Please note that the Exchange services could be marked as
non-Microsoft. Please do not disable those services.

e. Click OK to close the MSConfig window. Click Yes when you are asked to
restart your computer in order to enable the changes.

And then manually started the Windows Installer Service. Then try to
install the software as the steps in my previous reply.

If the issue persists, please kindly help me collect whole logs again for
further investigation

Hope these steps will give you some help.

Thanks and have a nice day!

Best regards,

Terence Liu(MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities...s/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.
=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------
| From: "Joseph A" <josephalmi@gmail.com>
| Newsgroups: microsoft.public.windows.server.sbs
| Subject: Re: "Microsoft Windows SharePoint Services 3.0 setup did not
complete successfully" on SBS 2003
| Date: 17 Jan 2007 14:48:38 -0800
| Organization: http://groups.google.com
| Lines: 129
| Message-ID: <1169074118.348368.68600@l53g2000cwa.googlegroups.com>
| References: <1167758494.668750.145770@n51g2000cwc.googlegroups.com>
| <1168439166.576008.27410@k58g2000hse.googlegroups.com>
| <SAsiaVVNHHA.3604@TK2MSFTNGHUB02.phx.gbl>
| NNTP-Posting-Host: 207.59.110.74
| Mime-Version: 1.0
| Content-Type: text/plain; charset="us-ascii"
| X-Trace: posting.google.com 1169074129 14858 127.0.0.1 (17 Jan 2007
22:48:49 GMT)
| X-Complaints-To: groups-abuse@google.com
| NNTP-Posting-Date: Wed, 17 Jan 2007 22:48:49 +0000 (UTC)
| In-Reply-To: <SAsiaVVNHHA.3604@TK2MSFTNGHUB02.phx.gbl>
| User-Agent: G2/1.0
| X-HTTP-UserAgent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US;
rv:1.8.1.1) Gecko/20061204 Firefox/2.0.0.1,gzip(gfe),gzip(gfe)
| Complaints-To: groups-abuse@google.com
| Injection-Info: l53g2000cwa.googlegroups.com; posting-host=207.59.110.74;
| posting-account=wXaoqA0AAAAksJyiE6_iRXyc1AN8zufd
| Path:
TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS02.phx.gbl!TK2MSFTFE
EDS01.phx.gbl!msrtrans!msrn-in!newshub.sdsu.edu!border1.nntp.dca.giganews.co
m!nntp.giganews.com!postnews.google.com!l53g2000cwa.googlegroups.com!not-for
-mail
| Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:11073
| X-Tomcat-NG: microsoft.public.windows.server.sbs
|
| Hi Terence
|
| I was not able to install anything in safe mode (that is what I believe
| was implied by your instructions), it said that it could not access the
| installer service?
|
| Anyway, I reinstalled the the applications you specified while in
| windows and got the same error. I will be producing the logs the next
| opportunity I have (soon).
|
| Best Regards,
|
| Joseph
|
|
| Terence Liu [MSFT] wrote:
| > Hello Joseph,
| >
| > Thank you for kind update.
| >
| > I was just writing to say that I hope everything is going well.
| >
| > Please do not hesitate to let me know if there's anything else I can do
for
| > you.
| >
| > Thank you and have a nice day,
| >
| > Best regards,
| >
| > Terence Liu(MSFT)
| >
| > Microsoft CSS Online Newsgroup Support
| >
| > Get Secure! - www.microsoft.com/security
| >
| > =====================================================
| > This newsgroup only focuses on SBS technical issues. If you have issues
| > regarding other Microsoft products, you'd better post in the
corresponding
| > newsgroups so that they can be resolved in an efficient and timely
manner.
| > You can locate the newsgroup here:
| > http://www.microsoft.com/communities...s/default.aspx
| >
| > When opening a new thread via the web interface, we recommend you check
the
| > "Notify me of replies" box to receive e-mail notifications when there
are
| > any updates in your thread. When responding to posts via your
newsreader,
| > please "Reply to Group" so that others may learn and benefit from your
| > issue.
| >
| > Microsoft engineers can only focus on one issue per thread. Although we
| > provide other information for your reference, we recommend you post
| > different incidents in different threads to keep the thread clean. In
doing
| > so, it will ensure your issues are resolved in a timely manner.
| >
| > For urgent issues, you may want to contact Microsoft CSS directly.
Please
| > check http://support.microsoft.com for regional support phone numbers.
| >
| > Any input or comments in this thread are highly appreciated.
| > =====================================================
| >
| > This posting is provided "AS IS" with no warranties, and confers no
rights.
| >
| > --------------------
| > | From: "Joseph A" <josephalmi@gmail.com>
| > | Newsgroups: microsoft.public.windows.server.sbs
| > | Subject: Re: "Microsoft Windows SharePoint Services 3.0 setup did not
| > complete successfully" on SBS 2003
| > | Date: 10 Jan 2007 06:26:06 -0800
| > | Organization: http://groups.google.com
| > | Lines: 32
| > | Message-ID: <1168439166.576008.27410@k58g2000hse.googlegroups.com>
| > | References: <1167758494.668750.145770@n51g2000cwc.googlegroups.com>
| > | NNTP-Posting-Host: 207.59.110.74
| > | Mime-Version: 1.0
| > | Content-Type: text/plain; charset="us-ascii"
| > | X-Trace: posting.google.com 1168439168 22673 127.0.0.1 (10 Jan 2007
| > 14:26:08 GMT)
| > | X-Complaints-To: groups-abuse@google.com
| > | NNTP-Posting-Date: Wed, 10 Jan 2007 14:26:08 +0000 (UTC)
| > | In-Reply-To: <1167758494.668750.145770@n51g2000cwc.googlegroups.com>
| > | User-Agent: G2/1.0
| > | X-HTTP-UserAgent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US;
| > rv:1.8.1.1) Gecko/20061204 Firefox/2.0.0.1,gzip(gfe),gzip(gfe)
| > | Complaints-To: groups-abuse@google.com
| > | Injection-Info: k58g2000hse.googlegroups.com;
posting-host=207.59.110.74;
| > | posting-account=wXaoqA0AAAAksJyiE6_iRXyc1AN8zufd
| > | Path:
| >
TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS02.phx.gbl!news-out.
| >
cwix.com!newsfeed.cwix.com!newscon02.news.prodigy.net!prodigy.net!border1.nn
| >
tp.dca.giganews.com!nntp.giganews.com!postnews.google.com!k58g2000hse.google
| > groups.com!not-for-mail
| > | Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:9327
| > | X-Tomcat-NG: microsoft.public.windows.server.sbs
| > |
| > | Thanks Terence,
| > |
| > | I'll be giving this a shot on Friday evening. I will let you know how
| > | it goes.
| > |
| > | Best Regards,
| > |
| > | Joseph
| > |
| > | Joseph A wrote:
| > | > When installing the newest sharepoint on our SBS server, using the
| > | > official SBS-Sharepoint doc form MS, I get: "Microsoft Windows
| > | > SharePoint Services 3.0 setup did not complete successfully"
| > | >
| > | > After that, if I try to go to configuration anyway, I get the
| > | > following:
| > | >
| > | > "failed to start the database service MSSQL$MICROSOFT##SSEE. Repair
| > | > this product"
| > | >
| > | > After I do a repair, I go back into the sharepoint configuration it
| > | > still does not work and says it can't conect to a database (Don't
have
| > | > the exact error at this moment).
| > | >
| > | > What can I do to successfully do a side by side installation? I was
| > | > using the doc found here:
| > | >
| >
http://www.microsoft.com/downloads/d...c81-efff-4f5b-
| > a28a-8265f1e99f5b&displaylang=en
| > | >
| > | > Thank You
| > | >
| > | > Joseph
| > |
| > |
|
|

#15 26-01-2007

Sorry for the delay, this is still an issue, but I've been sent out of
state until February... I will definitely perform the below once I
return. I would appreciate keeping this thread open until I return!
Thanks again for the help

Joseph

On Jan 18, 4:34 am, v-ter...@online.microsoft.com (Terence Liu [MSFT])
wrote:
> Hello Joseph,
>
> Thank you for update.
>
> You can not success install anything in safe mode may because the Windows
> Installer service is not started.
>
> Manually started the services related to installation in safe mode
> ----------------------------
> 1. Click Start, click Run, type "services.msc" (without the quotation
> marks) in the Open box, and then click OK
> 2. Find Windows Installer Service. Right-click each of them and select Start
>
> Then try to install the software as the steps in my previous reply.
>
> If you still can not install software in safe mode, please try to do a
> clean boot:
>
> To clean boot the problematic computer, please use the steps below:
> a. Click Start, click Run, and then in the Open box, type "MSCONFIG"
> (without the quotation marks). Click OK.
>
> b. In the System Configuration Utility (MSConfig) window, click to select
> the Selective Startup button.
>
> c. Click to clear the check mark from the "Load startup items" below
> Selective Startup.
>
> d. Click the Services tab, click to check the "Hide All Microsoft Services"
> box, and remove all the check marks from the remained Non-Microsoft
> Services. Please note that the Exchange services could be marked as
> non-Microsoft. Please do not disable those services.
>
> e. Click OK to close the MSConfig window. Click Yes when you are asked to
> restart your computer in order to enable the changes.
>
> And then manually started the Windows Installer Service. Then try to
> install the software as the steps in my previous reply.
>
> If the issue persists, please kindly help me collect whole logs again for
> further investigation
>
> Hope these steps will give you some help.
>
> Thanks and have a nice day!
>
> Best regards,
>
> Terence Liu(MSFT)
>
> Microsoft CSS Online Newsgroup Support
>
> Get Secure! -www.microsoft.com/security
>
> =====================================================
> This newsgroup only focuses on SBS technical issues. If you have issues
> regarding other Microsoft products, you'd better post in the corresponding
> newsgroups so that they can be resolved in an efficient and timely manner.
> You can locate the newsgroup here:http://www.microsoft.com/communities...s/default.aspx
>
> When opening a new thread via the web interface, we recommend you check the
> "Notify me of replies" box to receive e-mail notifications when there are
> any updates in your thread. When responding to posts via your newsreader,
> please "Reply to Group" so that others may learn and benefit from your
> issue.
>
> Microsoft engineers can only focus on one issue per thread. Although we
> provide other information for your reference, we recommend you post
> different incidents in different threads to keep the thread clean. In doing
> so, it will ensure your issues are resolved in a timely manner.
>
> For urgent issues, you may want to contact Microsoft CSS directly. Please
> checkhttp://support.microsoft.comfor regional support phone numbers.
>
> Any input or comments in this thread are highly appreciated.
> =====================================================
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
> --------------------
> | From: "Joseph A" <josepha...@gmail.com>
> | Newsgroups: microsoft.public.windows.server.sbs
> | Subject: Re: "Microsoft Windows SharePoint Services 3.0 setup did not
> complete successfully" on SBS 2003
> | Date: 17 Jan 2007 14:48:38 -0800
> | Organization:http://groups.google.com
> | Lines: 129
> | Message-ID: <1169074118.348368.68...@l53g2000cwa.googlegroups.com>
> | References: <1167758494.668750.145...@n51g2000cwc.googlegroups.com>
> | <1168439166.576008.27...@k58g2000hse.googlegroups.com>
> | <SAsiaVVNHHA.3...@TK2MSFTNGHUB02.phx.gbl>
> | NNTP-Posting-Host: 207.59.110.74
> | Mime-Version: 1.0
> | Content-Type: text/plain; charset="us-ascii"
> | X-Trace: posting.google.com 1169074129 14858 127.0.0.1 (17 Jan 2007
> 22:48:49 GMT)
> | X-Complaints-To: groups-ab...@google.com
> | NNTP-Posting-Date: Wed, 17 Jan 2007 22:48:49 +0000 (UTC)
> | In-Reply-To: <SAsiaVVNHHA.3...@TK2MSFTNGHUB02.phx.gbl>
> | User-Agent: G2/1.0
> | X-HTTP-UserAgent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US;
> rv:1.8.1.1) Gecko/20061204 Firefox/2.0.0.1,gzip(gfe),gzip(gfe)
> | Complaints-To: groups-ab...@google.com
> | Injection-Info: l53g2000cwa.googlegroups.com; posting-host=207.59.110.74;
> | posting-account=wXaoqA0AAAAksJyiE6_iRXyc1AN8zufd
> | Path:
> TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS02.phx.gbl!TK2MSFTFE
> EDS01.phx.gbl!msrtrans!msrn-in!newshub.sdsu.edu!border1.nntp.dca.giganews.co
> m!nntp.giganews.com!postnews.google.com!l53g2000cwa.googlegroups.com!not-for
> -mail
> | Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:11073
> | X-Tomcat-NG: microsoft.public.windows.server.sbs
> |
> | Hi Terence
> |
> | I was not able to install anything in safe mode (that is what I believe
> | was implied by your instructions), it said that it could not access the
> | installer service?
> |
> | Anyway, I reinstalled the the applications you specified while in
> | windows and got the same error. I will be producing the logs the next
> | opportunity I have (soon).
> |
> | Best Regards,
> |
> | Joseph
> |
> |
> | Terence Liu [MSFT] wrote:
> | > Hello Joseph,
> | >
> | > Thank you for kind update.
> | >
> | > I was just writing to say that I hope everything is going well.
> | >
> | > Please do not hesitate to let me know if there's anything else I can do
> for
> | > you.
> | >
> | > Thank you and have a nice day,
> | >
> | > Best regards,
> | >
> | > Terence Liu(MSFT)
> | >
> | > Microsoft CSS Online Newsgroup Support
> | >
> | > Get Secure! -www.microsoft.com/security
> | >
> | > =====================================================
> | > This newsgroup only focuses on SBS technical issues. If you have issues
> | > regarding other Microsoft products, you'd better post in the
> corresponding
> | > newsgroups so that they can be resolved in an efficient and timely
> manner.
> | > You can locate the newsgroup here:
> | >http://www.microsoft.com/communities...s/default.aspx
> | >
> | > When opening a new thread via the web interface, we recommend you check
> the
> | > "Notify me of replies" box to receive e-mail notifications when there
> are
> | > any updates in your thread. When responding to posts via your
> newsreader,
> | > please "Reply to Group" so that others may learn and benefit from your
> | > issue.
> | >
> | > Microsoft engineers can only focus on one issue per thread. Although we
> | > provide other information for your reference, we recommend you post
> | > different incidents in different threads to keep the thread clean. In
> doing
> | > so, it will ensure your issues are resolved in a timely manner.
> | >
> | > For urgent issues, you may want to contact Microsoft CSS directly.
> Please
> | > checkhttp://support.microsoft.comfor regional support phone numbers.
> | >
> | > Any input or comments in this thread are highly appreciated.
> | > =====================================================
> | >
> | > This posting is provided "AS IS" with no warranties, and confers no
> rights.
> | >
> | > --------------------
> | > | From: "Joseph A" <josepha...@gmail.com>
> | > | Newsgroups: microsoft.public.windows.server.sbs
> | > | Subject: Re: "Microsoft Windows SharePoint Services 3.0 setup did not
> | > complete successfully" on SBS 2003
> | > | Date: 10 Jan 2007 06:26:06 -0800
> | > | Organization:http://groups.google.com
> | > | Lines: 32
> | > | Message-ID: <1168439166.576008.27...@k58g2000hse.googlegroups.com>
> | > | References: <1167758494.668750.145...@n51g2000cwc.googlegroups.com>
> | > | NNTP-Posting-Host: 207.59.110.74
> | > | Mime-Version: 1.0
> | > | Content-Type: text/plain; charset="us-ascii"
> | > | X-Trace: posting.google.com 1168439168 22673 127.0.0.1 (10 Jan 2007
> | > 14:26:08 GMT)
> | > | X-Complaints-To: groups-ab...@google.com
> | > | NNTP-Posting-Date: Wed, 10 Jan 2007 14:26:08 +0000 (UTC)
> | > | In-Reply-To: <1167758494.668750.145...@n51g2000cwc.googlegroups.com>
> | > | User-Agent: G2/1.0
> | > | X-HTTP-UserAgent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US;
> | > rv:1.8.1.1) Gecko/20061204 Firefox/2.0.0.1,gzip(gfe),gzip(gfe)
> | > | Complaints-To: groups-ab...@google.com
> | > | Injection-Info: k58g2000hse.googlegroups.com;
> posting-host=207.59.110.74;
> | > | posting-account=wXaoqA0AAAAksJyiE6_iRXyc1AN8zufd
> | > | Path:
> | >
> TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS02.phx.gbl!news-out.
> | >
> cwix.com!newsfeed.cwix.com!newscon02.news.prodigy.net!prodigy.net!border1.nn
> | >
> tp.dca.giganews.com!nntp.giganews.com!postnews.google.com!k58g2000hse.google
> | > groups.com!not-for-mail
> | > | Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:9327
> | > | X-Tomcat-NG: microsoft.public.windows.server.sbs
> | > |
> | > | Thanks Terence,
> | > |
> | > | I'll be giving this a shot on Friday evening. I will let you know how
> | > | it goes.
> | > |
> | > | Best Regards,
> | > |
> | > | Joseph
> | > |
> | > | Joseph A wrote:
> | > | > When installing the newest sharepoint on our SBS server, using the
> | > | > official SBS-Sharepoint doc form MS, I get: "Microsoft Windows
> | > | > SharePoint Services 3.0 setup did not complete successfully"
> | > | >
> | > | > After that, if I try to go to configuration anyway, I get the
> | > | > following:
> | > | >
> | > | > "failed to start the database service MSSQL$MICROSOFT##SSEE. Repair
> | > | > this product"
> | > | >
> | > | > After I do a repair, I go back into the sharepoint configuration it
> | > | > still does not work and says it can't conect to a database (Don't
> have
> | > | > the exact error at this moment).
> | > | >
> | > | > What can I do to successfully do a side by side installation? I was
> | > | > using the doc found here:
> | > | >
> | >http://www.microsoft.com/downloads/d...D=0daafc81-eff...
> | > a28a-8265f1e99f5b&displaylang=en
> | > | >
> | > | > Thank You
> | > | >
> | > | > Joseph
> | > |
> | > |
> |
> |

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads for: ""Microsoft Windows SharePoint Services 3.0 setup did not complete successfully" on SBS 2003"
Thread	Thread Starter	Forum	Replies	Last Post
Getting "Device Setup Has Failed to Complete" error for HP Photosmart 8450	Anush21	Hardware Peripherals	3	05-01-2012 08:07 PM
Microsoft Office Professional 2007 Trial setup did not complete successfully	mike.mu@gmail.com	Office Setup	9	08-12-2010 06:13 PM
Outlook 2003 Error:"Could not complete the operation. One or more parameter values are not valid"	AAROON	Windows Software	5	01-09-2010 11:43 AM
"please wait while windows configures microsoft office professionaledition 2003" On roaming profiles	Wingnut	Office Setup	3	06-09-2008 04:29 AM
Cannot remove "Windows SharePoint Services Support" feature	p.crager@gmail.com	Office Setup	2	08-02-2008 07:49 PM