Ideally monitors works on two modes: alphanumeric mode and graphics mode. The alphanumeric mode is the one which is used in Dos or the BIOS. Over here the monitor's minimum functionality is being...
Type: Posts; User: quota
Ideally monitors works on two modes: alphanumeric mode and graphics mode. The alphanumeric mode is the one which is used in Dos or the BIOS. Over here the monitor's minimum functionality is being...
If you don't have any dedicated graphics card installed on your computer and if you are using Intel graphics chips then the graphics memory that is in use depends on the configuration from the...
Well see if you can stop the service "Plug n Play" and put it on manual startup. Then you uninstall the drivers, restart the computer, download the drivers manually, restart the service and then...
"Flip Queue Size" is similar to the 'Max Frames to Render Ahead' in Nvidia. So you can change it as per your needs. It is not like you shouldn't do that or it will harm anything. I would suggest to...
But why do you want a graphics card that rises to 100°c when in idle, it also have high sounds which seems like you are sitting beside an airplane? The worst part is that it consumes a lot of power...
Well with my past 8 years of experience on computers I can tell you that there is noway of repairing a scratched screen whether it is a laptop screen or a standalone monitor. But if you want you can...
You need to use 2x DVI + DP. The reason is that HDMI is shared with one DVI port. Therefore, it is unfortunately not possible to use 2x dvi and hdmi.
5870 has basically only 3 signal outputs. 1x...
After watching your image links and whatever you have mentioned above, it seems to me memory problem. What and how much of ram do you have? Did you tried increasing your ram modules? However I don't...
Talking about Windows 7, it will work on any graphics card since its system requirement is not very resource hungry. It would not even use a lot of memory as Windows Vista. However I would also to go...
Generally systems memory and graphics card memory are two different types of memory. Graphics cards have there own ram built into it for their use whereas the system ram is your main memory. During...
This behavior can occur if:
You using Microsoft Plus! product for Windows XP screen savers
You change the display mode resolution setting of the monitor to a value that is different from that...
Intel GMA 4500 Features:
Graphics Media Accelerator: GMA X4500HD
Full HW Acceleration MPEG2 Video Decode: Yes
Full HW Acceleration VC1 Decode: Yes
Full HW Acceleration AVC Decode: Yes
HD...
I am using Tversity to stream media to xbox 360. Everything was working normally and I could use tversity from my PC and was able to play media files from my xbox 360 until yesterday. But my settings...
I am running a website. I am using IIS7 and Apache HTTP Server for my website. I recently noticed that a lot of load on my server due to continuous request from some users who visit my website...
I want to download a set of directories via ftp from my Linux server situated at other location. Is there any simplest and effective way to achieve this? Well I suppose open each subdirectory and...
I am trying to create a mashup. Is there a way to overlay a div so that everything is contained in a main DIV which holds the background image.
For example you have a static web page. When a user...
Thanks but I don't have the manual for this graphics card, I'll try to search on the Internet.
Or else I will find another graphics card, what would you advise me?
While unplugging the power connector of my graphics card, one of the power supply Pins got broke. So, what is the exact name of the connector and where can I find it? I am having Winfast A350 TDH LX...
The joystick of Xbox 360 has one wire that plugs into a USB port
I have a joystick of Xbox 360 and I want to connect it to my computer to play with. The problem is that it is detected for 1 sec, because its dry central LED lights up green, but after then it turns...
There is nothing on the pwr fan, the cpu fan and chassis fan each being occupied and functional.
I have the exception of 3 pin fan to 4 pin cpu, hence the 4-hole of the power supply that is normally on the power fan a 3 pin? I'm afraid to review the smoke ...
I recently installed Asus M3A78-EM AM2+ motherboard with a 720 phenom x3, a Corsair power supply and 2 x 1GB 6400. (2 x 12, 2 x 2, cpu fan). The LED on the motherboard is on and the fan running.
...
So after some checking, memory is intact at first but still no way to make walking on the PC that has sorely needed.
Both RAM slots are ok too, and old RAM works without any problems.
Now I...
I wanted to replace a strip of RAM (DDR SDRAM) 512 MB by it:
KVR400x64c3A/1GB (Also DDR SDRAM)
But when I did it and launched the PC, it began beeps insisted on a black screen. As I drew the...
I first put my printer in DHCP, the ip that the router gave me was the 192.168.1.14. I just tried with that but it does not ping.
machine1: 192.168.1.11
machine2: 192.168.1.12
Printer: 192.168.1.14
Ping time is over ...
Windows XP on both machines connected Wifi.
When I plugged into the router log:
Everything was going very well for my HP Deskjet 6940 Printer which is plugged in with RJ45 to my router.
Last week the router had to be changed. In the allocation of IP for the printer I could...
My config:
Cooler Master HAF 932
Cooler Master eXtreme Power 550W Power Supply
Pentium Dual-Core E2180
Zalman CNPS9500
4GB DDR2-800
Asrock 4CoreDual-Sata2
9600GT 512MB
Maxtor 500GB Hard...
But I tested, and the concern is I had a few bugs with the "IMAP Folders" never too understood what it was. And more, when you click on an email, it automatically downloaded and the PC was blocked...
Thank you!
Indeed, it seems to do what I search, there's more to test.
Another question if you know, OWA, the people create folders to sort the mails over the Inbox. For against, with POP, it...
I am the admin of an Exchange server on a network of fifty PC. Everything works, it is on an Exchange Server 2003.
For remote sites, since they are not on the field, we propose the solution OWA...
correction: my bios is 1017
but my 250 sata drive only works very well
actually I too want to put a beta bios
should I buy a controller card? I'll recheck my settings even in the SATA bios,
...
I bought a hard drive 500GB Western Digital Scorpio Blue, the problem is that my motherboard (Asus A8V Deluxe) does not recognize.
I have another 250GB SATA disk (which is well known), when I...
Hello everybody, for some time I have a problem with my Firefox not necessarily bad, but annoying.
Indeed approximately every two weeks, my Firefox tells me the need for installing macromedia...
I went in the manager to switch from DMA 5 to PIO for the four IDE channel. Against by the SATA controller, no trace of these parameters. I retried, I went from 3.5 to 1.5 MB/s.
I have four SATA disk
- 1 Raptor 36GB
- 2 Hitachi 500 GB
- 1 Seagate 500GB (bought recently)
For a week no problem with the Seagate. Furthermore it has been recognized, I changed the...
If it is bootable, and I boot the stuff I put it, without it I could install XP.
If I see although it is not clear, not many people talk about on the net and found a lot of tutorials rather...
Here is the challenge of the day: I have a computer with an HD and a USB key (no CD or floppy), and you must format and reinstall Windows XP!
So there I go!
Here's what does not:
- Format...
Yes my motherboard FSB is 133MHz, but strange thing:
on the Intel site, they indicate CPUs supported, and the highest frequency is 933 MHz; but on the Dell site, when I enter my serial number and I...
But I'd like to "update" if I may say so (even if it does not feel, but also to tweak a bit and learn), a very old computer, based on a Pentium! Coppermine 866MHz socket 370.
And I'm wondering if...
What is the number under CPUID and it has to be identical at a CPU upgrade?
cleaning was done.
the proc is an AMD Athlon 3000 + 2X1GB ram
I am thinking the problem is motherboard or bios!
Bios: I put the info
CPU Operating Speed: Default
Multiply Facor: StartUp
CPU FSB Clock (MHz): 204
AGP Clock: Auto
Voltages Control: Default
CPU Core Voltage: 0 mV
DDR Voltage: 2.60V
I have a major problem with blue screen without freezes, and my research brought me different checking the power supply voltages. I had less than 10v instead of 12v, and it was no name, I bought a...
I have a SSD installed on my DELL INSPIRION 530s SLIM desktop. I am on Vista Home Premium. I am eager to use it. But it is working too slow. Is there any tweak to increase the SSD performance? Please...
Already thank you for your answers!
So to clarify, I have an Asus Striker Extreme Motherboard => 680I SLI
I disabled in the bios on the control type stuff EIST etc ...
I dare not go...
I wanted to know if you think about 1.26V for the vCore is enough for a frequency of 3.4 GHz? I am having E8400.
Detail: In the bios I have set 1.35V and it shows 1.31v in bios ... and with 1.34V...
The Nokia E70 is designed for people who want the smallest smartphone available that comes with a qwerty keyboard for typing messages and notes. The Nokia E70 features a wide, high-resolution screen,...
Cool, now running at 3.4 GHz with your settings. Will see if I can find something ideal for 3.6 GHz. I will get switched cooler. Have only stock cooler on the CPU but the cabinet is brilliant with...