Search:

Comodo Firewall Pro is a freeware firewall provides protection on a Microsoft Windows operating system from both inbound and outbound attacks.
Outpost Firewall great firewall this is way better...

For an IPP client to be able to connect to CUPS it must have permission. An IPP printer is a printer attached to a different Linux system on the same network running CUPS or a printer configured on...

Short for the Wireless Application Protocol, a secure specification that allows users to access information instantly via handheld wireless devices such as mobile phones, pagers. WEP was the...

SEOmoz has created a tool that allows you to enter an IP and to locate it on Google Maps. The application uses Ajax so it will display the map as you type (it's useful to test Class C IP ranges)....

If you do not see the Wireless Network Connection icon in the Network Connections folder, or if you cannot view the properties, there is a problem with the driver for the wireless network adapter. If...

Try typing "admin" as the user name and "sky" as the password. If that doesn't work you should be able to unplug the router for 1 - 5 minutes depending on the router and that will reset the route to...

A softswitch is typically used to control connections at the junction point between circuit and packet networks. The Voipswitch Softswitch is state of the art software for Internet Telephony...

VPN Tunneling is a network technology that encapsulates packets at the same level or below. The Secure Socket Tunneling Protocol (SSTP) creates a VPN tunnel that travels over Secure-HTTP, One type...

Firstly check that your laptop can 'see' the di-524m wireless router.To do this, right click on your "My Network Places" icon and select Properties. Look for the "Wireless Network Connection" icon....

Administrators can block ranges of IP addresses, if you would like to prevent an individual or a group of individuals on a certain IP range from accessing your site, you can selectively deny access...

From PS3 select network Settings > Internet Connection Settings > select Custom >selct the connection type > select Auto Detect > On the IP Address Setting screen, select Manual > Insert IP address...

Do you have Auth ID set? And does the Linksys SPA3102 report Line 1 as "Online" ? You need to go to its built in web browser, and access it from static IP address.

The basic VoIP requirements is you need to find a VoIP provider and You will need an Internet connection that can handle at least 128 kbps on the upload side. A provider will set up your account and...

1) reset router
2) Try the command ipconfig/release or ipconfig/renew
3) ping to default router/gateway

Use Netsh.exe, it is a tool an administrator can use to configure and monitor Windows-based computers at a command prompt.when you use Netsh you need to specify what network properties you need to...

Did you enter the default password of D Link DSL-G604T and then make you new password change? To reset : hold router powered on, press and hold the Reset button. 3 Hold the Reset button for about 10...

A switch is a device that allows multiple computers to connect to one Internet connection but it connect computers in same network if you want to access another network (public or Private) you need...

The PS3 determines its own IP address from the ones that are available from your ISP. If you PS3 can't obtain an IP address, make sure UPnP (Universal Plug and Play) is enabled in your router...

If your WEP or WPA key is correct, then the problem might be related to MAC address filtering.Try to check for correct SSID or your security key, contact admin of network for authentication.

The Internet Connectivity Evaluation Tool checks your Internet router to see whether it supports certain technologies. In the remote desktop connection options check the option :reduce colors to...

If Both laptop have wireless cards, u can connect both through a peer to peer network. Both laptops must also belong to the same network (Same Workgroup name -The workgroup name.

If router stops working and you must reset it back to it's default settings, losing all the configuration information. Not a problem if you have a backup of the configuration that can be easily...

RIS delivers only clean installs of XP Professional, you cannot use this technology to upgrade clients such as Windows 98 to XP. A Pentium or Pentium II 200 megahertz (MHz) CPU is recommended. At a...

Remote desktop access allows you to access your computer from a remote location. Vpn allows to communicate and share information across a central computer network.Remote Access allow you to access ...

You can install two lan card on one computer, but each LAN card should be set for different connections. If both connection going through router then router will automatically assign an IP address to...

Virtual Network Computing (VNC) gives control of another computer across a local network or the Internet. It uses the RFB protocol to remotely control another computer. ... A particularly good choice...

Firewall installed on Windows computers hosting the Wi-Fi USB Connector will interfere with its operation, To solve this issue, you need to set it to full access to the Internet, or manually specify...

The dhcp servers must have static ip's. Also, check if you have right LAN card driver.Check the DHCP configuration and verify that all subnets managed by the DHCP server are listed in the...

You can change your ip address to 192.168..X.X because it belongs t different ip address range. If you want use that ip address then you need to change you internal router ip also.

Place the Access Point > Insert one end of an Ethernet cable into the LAN port on the back of the Access Point and the other end of the cable into an Ethernet jack, switch or hub on your wired...

Did the problem occur after you reinstalled your NIC? If so it could be an IRQ conflict which could probably be resolved by moving the NIC to a different PCI slot. If didn't solve the problem then...

Wireless routers can broadcast on several different channels, similar to the way radio stations use different channels. Try changing your wireless router's channel through your router's configuration...

127.0.0.1 is the standard IP address used for a loopback network connection.127.0.0.1 is used whenever a program needs to access a network service running on the same computer as itself.

To connect your hp printer using web browser follow the step > open the web browser then type name of the server and after that type the printer name then click the link for the printer that you want...

Cable activity button on modem display different information : Off > No cable connection detected or modem is in stand-by mode. On > Modem is acquired. Data can be sent. Make sure that the dialer and...

There are many FTP client are use to transfer files to a web server.SmartFTP allows you to transfer files across the Internet. With a Windows XP look and feel and features including SSL...

If you enable Remote Desktop on PC2 in one branch of office , you can run Remote Desktop within a Remote Desktop connection. Once connected, Remote Desktop gives you mouse and keyboard control over...

A static IP (Internet Protocol) address is an identifier that helps one computer find another one in the great Internet cloud. While selecting static ip make sure that it is not with ".0" or ".255" -...

Hamachi will allow you to establish secure direct connections to PCs that are not accessible otherwise due to the restrictions in network setup. Hamachi requires TUN/TAP device driver to create and...

Make sure all machines have the same workgroup and over time the other one will disepate. To delete computers from workgroup, right click on MyComputer > Properties > Computername tab > go to Change...

Nslookup.exe is a simple interface to the DNS system. It provides the most commonly required functionality of the unix nslookup command, i.e. translation between IP addresses and hostname (domain...

What wireless card is used? Note the manufacturer and the model number.What is the driver version for the card? Look in Device Manager or click Configure in the Properties dialog box of the wireless...

You need software FreeNAS 0.7RC1 to Build A NAS Box. Also reuired USB Thumb Drive,Motherboard,CPU, Case, Memory,Videocard, Optical Drive, Power Supply,One or More Hard Drives.

Run this command and check the connection :


If there is no responce or no connectivity then open terminal and type system--config--network, it will ask for password. Enter valid root password, a...

You can change ip address in Linux using ifconfig command itself. To set IP address 192.168.22.105, enter command:
# ifconfig eth0 192.168.22.105 netmask 255.255.224.0 up
# ifconfig eth0

To make...

If you have manually setup your ip address make sure your DNS server address is correct. The computer's built-in Apple modem attempts to connect to an ISP but disconnects during negotiation or...

To add a computer or compatible device to your wireless network
1.Click Start and then click Control Panel.

2.If you're using the Category view of Control Panel, click Network and Internet...

Failed to query tcp/ip settings of the connection cannot proceed error occur if the drivers got corrupt, Check your hardware list to see if you have a network adapter installed or if there is a...

Cisco ASA 5500 Series Adaptive Security Appliances support:

Customization: Personalize security for your specific access needs and business policies.
Flexibility: As your business grows and needs...

Control Panel > Network Connections > (Right click on the active connection) > Properties Make sure “Client for Microsoft Networks” is checked.

Check this thread to solve the network problem :...