No I am not missing out anything and I am quite aware of these things. Anyways I think you were right I have check out the board with other working graphic card and unfortunately I am getting same...
Type: Posts; User: Run.DK
No I am not missing out anything and I am quite aware of these things. Anyways I think you were right I have check out the board with other working graphic card and unfortunately I am getting same...
So here is what I have found so far:
I have tried updating the bios and have tried switching between PCIE/PCI but it did not made any difference and the card was not getting detected.
Later I...
I have recently bought a new Asus P8Z68-V Pro motherboard as the previous board has turned out faulty. The problem that I am having with it is that my graphic card is not getting detected by it. The...
Hey guys thanks for your response but I think that there is something wrong with the cpu fan. I have taken out the case and have inspected the environment within it.The temperature is appearing to be...
I have recently switched to AMD Phenom II X4 955 Black Edition from Intel core i3 and the problem that I am having with I, is that it makes Loud noise which is quite irritating. I did not expect it...
Even I need some help regarding the same, I am getting an error message while updating the Quick Heal but not the one which has been mentioned above. When I am trying to update the Quick Heal then I...
I am trying to flash new bios on my system and I have got the DR-DOS 7.x "Biosflash" Bootdisk-Creator for creating a new bootdisk and even I am using Uniflash. I am having the bios protection...
My system is having a MSI K9VGM-V MS-7253 Motherboard and everything was working fine by now but I don’t know what went wrong with it suddenly since i turned off my system yesterday. When i...
Hey thanks for the same but I have checked out the possible cause of the issue that you have mentioned in the second post and I have performed the possible solutions that has been suggested out there...
I was using windows vista earlier but recently installed windows 7 on my system. The issue that I am facing now is that the Aero is disabling itself randomly. I have not yet installed any program so...
My system is having Intel DZ77GA-70K desktop board along with i7-3770K CPU and the problem that I am having with it is that when I am turning on the system then I am getting a post code = 00 where as...
I have recently installed latest released version of Masters of the Arcane from Steam and my system specification are as followed:
iMac
12GB RAM,
2.93Gz quad-core i7
ATI Radeon 5750
In...
My system specification is as followed:
Antec 900 ATX Tower, Gigabyte GA-MA790GPT-UD3H 790GX Motherboard
AMD Phenom II x4 955
Corsair Vengeance 16GB (4x4GB) DDR3-1600
EVGA 2GB GTX 680,...
Even I need some help regarding the same actually I have recently bought a A-DATA's SH93 hard drive and I don’t know why but then it is appearing as if it has lost all the data reference because of...
Hey thanks to you for your interest but then I just wanted to share that I have tried out the following solutions so far and they have not made any difference in my case and I am still left with the...
I have been using windows xp and the problem that I am facing with windows live mail is that when I am forwarding emails having pictures in the incoming body then I am getting a message saying One or...
I will answer you in the same way:
No I am not having any controller plugged in accidentally
I don’t have any idea about what is the game using
Where I have to check out the control options...
I have recently purchased The Walking Dead Game and I am surprised to find out that there is not control for the pc, I am not very sure if I have purchased the Xbox version, I was getting it for the...
I have been in to a number of forums for this but then i have not yet found an effective solution for measuring the users’ current token size, i have checked out the above Microsoft link but then i...
I have recently created some Journal on my iPad 2 but then the problem is that when I am trying to publish to iCloud then it is just spinning wheel which indicates that the files is getting...
I am having the below setting which was by default and I have not yet made any changes to the same:
802.11 mode ... mixed n,g,b
Access Channel ... 2.437 GHz chan 6
Channel Width ...
I have recently bought Android Tablet ASUS TF101 and the problem that I am facing with the same is that it is failing to connect wirelessly intermittently on the next reboot after sleep, I have tried...
I was facing the same issue before where there was no more autoconnection to my home network but then later after trying out a number of solutions I was finally able to fix it out if you want then...
In that case I will like to inform you that I have tried updating to the latest 1.1.2 update but then it is not making any difference and the issue still exist, I am having the same issue on my iPad...
I have been running in to similar issues after upgrading the iBooks app to 1.1.1 and then sync my ipad, in my case I am not able to see the book in pdf, by now I have tried sync several times but...
Even I am having the same issue and by now I have tried out the below solutions.
I have tried launching the iPhoto 11 several times and everything was appearing to be ok but then when I closed...
In that case I am just having one camera and other than this I am also having other devolo "homeplugs" so I just wanted to know that can I use those as a substitute for the logitech homeplug? I also...
I have tried downgrading to the 3.1.154 and the camera were getting detected after flashing and rebooting I Re-Upgraded to the 3.1.22 version and then things were working fine, I thought that that...
I have followed your instruction and had plugged the homeplug directly to pc and I found that the camera is getting detected but then I am getting the same signal results as pre-firmware upgrade, and...
I have tried resetting my homeplug network by unplugging the network bridge adapter as well as the cameras but then that does not seems to be making any difference, the camera is still not getting...
I have just updated the Logitech Alert Commander Software to the recent one and since then the problem that I am facing is that the cameras are not getting detected, I wanted to share they were...
I think that there is surely something wrong with the game because I have been running in to the described issues from the day I had preorder, anyways in my vase I am using a wired card and I have...
I am already having the latest BIOS, latest chipset file as well as the latest Intel MEI installed on my system, I have got the BIOS and latest chipset driver from the intel site that has been linked...
I have started playing Tribes: Ascend and have found that there are no of bug in the my second game, I was really expecting to get a 'clean' bug free game but then it does not seem with the Tribes:...
So now I have tried out installing the driver that has been mentioned there and I am getting the same error message saying “This computer does not meet the minimum requirements for installing the...
Hey thanks for your interest but then I was thinking that the Intel drivers that has been mentioned in the solution of the above thread might have got installed after I tried out the AHCI hack in...
I have bought OCZ Agility 3 Series 60GB SSD recently and I have been trying to get it work with a fresh installation of Windows 7 32bits and with the latest bios as well, I have got the latest bios...
I have bought Nokia C2-03 and I have following bus in its software:
There is No option for modifying the duration before the auto-lock kicks in
There is no option for configuring the place...
I have checked out the link that you have posted above but then it is saying that everything is up-to-date, I am not willing to try out clean windows installation as I was having this issue with the...
My system specification is as followed:
CORE i5
8 GB RAM
750 GB HDD
ATI Radeon HD 6650M and Intel 3000
I am having the latest driver for the ATI Radeon from Lenovo, I mean the one dated...
I own Lenovo G770 and the problem that I am facing with the same is that the ATI display driver is triggering BSODs and I get the below error:
'the ATI display driver stopped working and has...
I have bought a new Lenovo ThinkPad SL410 and I am willing to watch movies via SL410 which is having only vga out port where as the tv is having avi jack, so I have bought the vga to avi convertor...
I have reseated the graphics card and I am not facing any crash but then I am running in to new issue now and it is that the system is getting freeze randomly, I am really running out of ideas now...
I have been facing the same issue and I really agree to you that it is very irritating for the left-handers to carry out note taking task, I think that there must be an app that we can use for...
System specification:
Motherboard -Microstar MS-7145 Chipset: Ati Express 200
CPU- AMD Athlon 64 3400+ 2.4GHz
RAM- DDR 1024mb
PSU- Mustiff 500W PSU
The video card temp seems to be 69C...
I have tried uninstalling Nvidia 8400 GS driver using driver sweeper for cleaning up the left out of the files and after rebooting the windows logo as appearing to be corrupted but then I got a pop...
My system is having Nvidia 8400 GS Graphics Card and I have been facing sudden crash when I am playing a 3D game, I mean that when the game crashes and when I reboot the machine then the game works...
I am really surprise to see it is working out, you really helped me here as I was not able to arrange a PS2 Keyboard currently anyways I wanted to know that when I am pressing the F9 in BIOS then it...
Hey thanks for the same but then using USB to PS/2 adapter is appearing to be quite painful, I just wanted to know that why is it not possible using USB keyboard rather than using PS/2, I mean do you...
I am having Gigabyte GA-Z68X-UD3R-B3 and GA-P67A-UD7-B3 motherboard and I have tried updating the 2nd BIOS on a DualBIOS motherboard by holding down the Alt+F12 during POST but then it does not seems...