After reading the problem that you are describing it seems that there is a problem with the Corsair power supply that you are using. Can you tell us whether your computer buid was surge protected? It...
Type: Posts; User: Baltazar
After reading the problem that you are describing it seems that there is a problem with the Corsair power supply that you are using. Can you tell us whether your computer buid was surge protected? It...
Have you tried uninstalling all the old drivers for your chipsets, video cards, audio onboard, ect? If you have not still done it then it could be possible that the old drivers are still stuck and...
Corsair Dominator Platinum is a great memory and in one of my friends pc it is running stable at 2400mhz with a Intel I7-4790k CPU running at 4.6ghz without any problems as well. This Corsair brand...
Even I had this similar problem with my pc once. What you need to do is power down the whole computer and then disconnect all the main power cords to the PSU and from the wall as well. After that...
First, you will have to connect SSD Sata cables to the 2 middle Sata ports on motherboard and connect hard drive on the bottom outside white port and then connect the dvd drive in the blue ports....
I am onwing a Gigabyte GA-Z87X-D3H motherboard and am very impressed with it. There are plenty of USB ports on this board along with lots of PCIe options and PCI slot which can be used for higher end...
Well, did you try to disable the sleep mode completely and also keep the hard drive on all the time and never go to sleep. Or you can simply choose High performance and then select when the computer...
Did you try to check in Device Manager to see if there is any yellow exclamation mark on the USB devices? You should try to uninstall whatever driver is installed for the usb device and then...
In order to get stability first, you will need to reset the BIOS to default settings. The motherboard that you have supports RAM speed till 1333mhz by default, so if you have a RAM of 1600mhz then it...
You will have to search any user who has a similar setup and ask for the limitation that appears to be the memory controller on the CPU and not the chipset or the board. When I checked the Gigabyte...
Well, incase you dont have any worries shelling out money then you can even get the Gigabye Z97 Gaming 7 motherboard. As for the RAM you can also try to stick with a 16GB memory because you will not...
If you have a motherboard that can support either an AMD FX-8320 or AMD FX-8350 then I would suggest you to drop the AMD FX-6100 CPU which will be a bottleneck for yourself. So, it would be a wise...
Can you tell us whether the RPM goes down to the equivalent to 34%? You can try to use manual fan setting and see if that makes any difference. While keeping the speed of the fan on automatic it will...
Have you tried to take everything except for the PSU out of the computer chassis. Also check the motherboard for any signs of damage or anything broken. After that try to reinstall the mobo ensuring...
I am using HyperX Fury Black 8GB RAM from quite long time and it is working flawlessly in my computer. I assembled my computer and this RAM has been running very good in my pc till now. I havent...
I was also facing this similar issue. I did the same mistake of using @BIOS to flash the update on my Gigabyte motherboard. After facing this similar errors I noticed that I was using the revision...
First of all go to Device Manager and then uninstall USB 3.0 driver. After that insert Asus driver and then reinstall the driver and restart your pc. Now, the device might still not work. So, turn...
There might be some changes in the settings that you might have done. So, you will first need to check your audio device manager or the application turner it came with. I dont know if it is a board...
Out of the motherboard that you have listed I would go with the Gigabyte GA-Z97X-Gaming 5 motherboard. I have not tested any MSI motherboard's and have read few reviews about them user's complaining...
Have you tried to perform a BIOS update for your motherboard? Just go to your motherboard manufacturer's website and search and download the latest BIOS for your mobo and install it. You can even try...
Different people have different opinions but I have personally liked the Gigabyte G1.Sniper B5 motheboard. This the only green motherboard and it also comes in a perfect budget build. When ever you...
I think that you can use both model of the RAM on the motherboard without any issues. You can try to mix RAM brands, frequencies, CAS timings and also greater size RAM depending upon your...
Have you tried to clear the CMOS and checked if that worked? To do that simply take the CMOS battery inserted on the motherboard for 5 minutes and then re-insert it back to its place and boot the pc....
Can you try to check on each RAM stick in the SPD tab of CPU-Z software, which is located in the upper hand corner there is a selection for slot #, just check each RAM stick that you can confirm the...
The problem is that the 4GB sticks are acutally high density which is made by 4GB DRAM and if you have any LGA1156 motherboard then it will not support high density now. Kingston team wont be able to...
As far as comparing the 2 motherboard's that you have choosen, the Asus Maximus V1 Hero has a little advantage. It comes with extra Sata ports and also a M PCIE port. There is also extra overclocking...
Yes, the graphics card wont work if you have forgotten to plug the eight pin from the PSU to the motherboard. You will not get any kind of post even if you have plugged in the extra PCIE 12v power...
As per your motherboard manual, it seems that your mobo supports dual channel RAMs only. What it means is that you need to have the RAM installed in pairs because your board will not take one single...
The BIOS file that you have downloaded must be in a zip file. So to extract the files you will need to install a software called Winzip in your computer. Once installed then right click on the BIOS...
Even I think that that CPU must have died. Can you try to insert your processor in another compatible motherboard and see if that functions well or not. You can also check to see if your motherboard...
You can try to test with TouchBios to check the CPU temperature in your computer. I think that it will show you the same figure similar to those being reported in BIOS but it could vary from...
There might be also possibility of a short. Can you try to take out the motherboard outside with only the CPU and its fan installed on it. Dont plug anything, just boot with the RAM, processor on the...
I would also suggest you to use the USB BIOS Flashback to solve your problem. First of all download BIOS version 0804 from Asus site. After that borrow a usb drive and format it to FAT32 and then...
Well, everything depends on if you need the lower power consumption or not. If you want then you can also underclock the Intel Core i7-4770K to lower the power consumption since it is a more...
Exactly, it cannot be guaranteed that mixing the different RAM model will work together even though they should work theoretically. I would suggest you to remove any of the RAM stick from your...
Have you ensured that you have connected the external power to your Radeon R7 260X card? There should be a 4pin or 6 pin connector of the Power Supply that you need to plug into the GPU. Did you also...
Well, if you can let us know the budget then we would suggest you precisely which mobo to go for. Either case you will have to go with a 990FX chipset to get the most out of the Amd FX-8350 processor...
Can you enter your BIOS and change the boot order settings to either hard drive or something else like Floppy. If still you are getting the same issue then try to raise the QPI/Vtt to 1.15V. You can...
I was also facing this same error on my other Asus motherboard and the only difference that I can find is that previously it was much cooler than it is right now. I am thinking that the F1 bios error...
I would ask you to follow the steps given ahead. First pull the power cord out of the power supply and after that remove the CMOS battery. Now wait for 15 minutes and then press the On and Off button...
Hi Ashtray,
If your phone is not turning at all then you should better take it to the Nokia Care Customer and they will check your phone. If it is under warranty then you dont have to worry too...
Even I was facing the same problem and after uninstalling and reinstalling both the Intel and Nvidia drivers for couple of time in safe mode and normal model the problem still didnt go. But after a...
Are you using any graphics card, if so, then try to remove it from the motherboard's PCIe slot and then test with the onboard video of the motherboard whether you are getting the same vertical lines...
Can you also please list the BSOD error codes that you are getting over here? By saying that you get the BSOD randomly, do you mean that when you are not doing anything on your computer you get the...
Incase you are looking up for a speedy configuration then you will have to spend a little more and get something above the DDR3 1600mhz RAM. The best deal would be to get a DDR3 2200ghz RAM and with...
If the above tips are not working then you will need to manually set the speed and timings of the RAM. If the RAM that you have doesnt have XMP profiles or support then you are supposed to face such...
Yes, even I believe that using different mhz ram might not be a good idea. So the first thing you can do is get a set of 2 sticks of RAM from a single manufacturer and use that in your motherboard....
Have you checked the Event Viewer in Windows to look if there is any error message at the time of your computer freezing? Does the freezing happens after a full boot or it is cooler? If you have not...
Can you tell us whether any new recent updates was done by you in your laptop. If so then it might be possible that this recent update could have brought some kind of problem to you which is causing...
There are many good Power Supply available in the market. If I were you then I will get myself a psu from either Antec, Seasonic, Corsair or OCZ. Most of the other cheap PSU's usually have false...