Search:

Type: Posts; User: Omari

Page 1 of 10 1 2 3 4

Search: Search took 0.11 seconds.

  1. Replies
    3
    Views
    1,759

    Re: amd fx-8350 overclocking not stable

    If I am not mistaken then the Amd fx-8350 cpu base speed is 4.0ghz and you should get more than 200mhz out of it without any issues. Even if you use the Stock Turbo boost on the CPU then it goes till...
  2. Replies
    3
    Views
    2,007

    Re: need help connecting Antec HCG-750M psu

    After plugging every connector, you should try to boot the pc. If everything is well connected then it will take you to the BIOS screen and here you will need to keep in handy the Windows or Linux...
  3. Re: after overclocking Amd FX-6300 computer wont start

    Can you tell us whether there are any beeping sound when you are turning on your computer? What is the make and model of your Power Supply? You should try to perform a CMOS reset and see if that...
  4. Re: after overclocking Radeon R9 290 computer crashes constantly

    What is the make and model of your power supply? I am thiking that it might be possible that the PSU that you are using is not strong enough to handle the Radeon R9 290 graphics card. In any case,...
  5. Re: Intel Pentium G3258 safe overclocking temperature?

    If you are getting a 80C temperature then it should be at average for over 20 or some odd seconds but if you are getting 90C then it should be only for short duration of 1-2 seconds peaks. If it...
  6. Replies
    3
    Views
    3,638

    Re: Overclocking GeForce GT 730 graphics card

    Well, I would not suggest you to go for the Geforce GT 730 card and would recommend you to invest in a bit more money so that you can purchase either a GT 750 or GT 750TI graphics card. Since you are...
  7. Replies
    3
    Views
    2,085

    Re: Intel Pentium G3258 overclocking

    Yes, due the SpeedStep feature enabled in your BIOS you CPU must be downclocking everytime when it is idle. But while you are playing any games then your CPU will instantly jump up to 4ghz because it...
  8. Re: Intel i7-4790K overclocking with Software or within BIOS

    Could you please tell us which motherboard model are you using and if there are any CPU coolers installed as well? There are many software that you can use for overclocking and it usually reduces the...
  9. Replies
    3
    Views
    2,066

    Re: undo GeForce GTX 660 Ti overclocking

    What you can do is restart your pc and continuously tap on F8 key to get into Safe mode and then try to Restore to Last Known Good Configuration or else take the Repair Your Computer option to reset...
  10. Re: need opinion on Noctua NH-L9i low profile cooler

    I have also ordered this Noctua NH-L9i low profile cooler for my Intel i5 core as well. I dont know for sure what will be the case ventilation in the Cooler Master 120 but Noctua has stated that we...
  11. Replies
    3
    Views
    1,241

    Re: unlocking Amd Sempron 145 CPUs Second Core

    Can you check whether you have chaged the CPU driver? Incase you have installed Windows OS with only one core then you might be using the UNI core CPU driver. So just try to get into Device Manager...
  12. Replies
    3
    Views
    1,313

    Re: AMD FX 8350 with Antec H20 620 cooler problem

    You can try to clean up the thermal paste and then reapply it again in your computer. You can also try to blow compressed air in the reverse fan flow on the radiator and see if that helps. I am...
  13. Replies
    3
    Views
    1,100

    Re: Corsair 600W PSU good for overclocking

    Well, if you are looking to overclock on your current motherboard then there is a chance for your motherboard to get damaged. With the FX-6300 processor the M5A78L-LE mobo will not stand up to any...
  14. Replies
    3
    Views
    1,344

    Re: Antec Formula 7 thermal paste vs Arctic MX4

    I had a very bad experience with the Artic MX4 thermal paste. I used the MX4 paste on my graphics card and after that I started to stress test the card. But within no minutes the temperature rised to...
  15. Replies
    3
    Views
    960

    Re: intel i7-920 running at 100C at load

    I think that the stock cooler on the CPU might be problematic so try to remove it and use some other coolers like Antec Kuhler H2O 620 and see if that makes any difference. Remember to clean the...
  16. Replies
    3
    Views
    2,444

    Re: stop ASUS AI Suite from overclocking

    I am using the AI Suite III in my computer and when I want to reset this software's overclock then I simply reboot my pc and then go into bios and restore everything to defaults. I think that you...
  17. Replies
    4
    Views
    2,768

    Re: Antec 500W for R9 270X card

    The graphics card power recommendation is based on the Power Supply's total 12V output and it is not based on how many rails the PSU has. There is supposed to be a 6 pin connector which is rated for...
  18. Replies
    3
    Views
    1,673

    Re: AMD Radeon R7 260X Overclocking

    I have heard that the MSI motherboard for AMD system are not really good because they have got low quality VRM and low quality component, so you wont be able to overclock much from it. You can try to...
  19. Replies
    3
    Views
    1,168

    Re: AMD FX-8350 cooling solutions

    I will recommend you to go with a Custom Water Cooling solution ot get the chips maximum potential. You will just need to invest as much as in the cooling like you did with the processor. If you...
  20. Replies
    3
    Views
    1,534

    Re: AMD fx-8320 overclocking to 4.5GHz

    With the same Amd FX-8320 CPU I was able to overclock 4.5ghz easily without even changing any voltages but I was using liquid cooling so my temperatures didnt change as well. I dont know how to do...
  21. Re: Antec HCG-900 900W for crossfire and overclocking

    I bought one of these Power Supply and it had too many cables that I need to stuff somewhere in my cabinet. It is also a little hard to connect in fans or other parts that might need something...
  22. Replies
    3
    Views
    2,021

    Re: best air cooler for Intel Core i7-4930K

    There is no doubt that Noctua NH-D14 is good but take a look at the Thermalright Silver Arrow SB-E Extreme Dual Fan Universal CPU Heatsink as well. Its fan is built to fit any needs that you might...
  23. Replies
    3
    Views
    1,176

    Re: Overclocking Amd FX-6300 to 4.7GHz

    I have found out that the Amd FX-6300 processor can be overclocked similarly like an Intel i5 3570k processor, but I dont know for sure if it can reach the 4.7ghz overclock rate, although there are...
  24. Re: safe temperature after overclocking core i5 4670k

    Can you tell us whether you are using any CPU cooler in your computer or not? The intel core temperature that you are getting is within Intel's specs. Anything above 75C temperature is not good for...
  25. Replies
    3
    Views
    1,451

    Re: How to overclock Kingston HyperX Blu RAM?

    Overclocking will usually make a lot of difference in benchmarking for sure and I dont think that you will be able to feel it unless you will do some RAM intensive work. But anyhow, you can try to...
  26. Replies
    3
    Views
    936

    Re: Nvidia GTX 770 overclock setting

    All you need to do is download a tool called Evga Precision by searching it on the web and install it in your pc. You can use this tool to make your overclocking go easy. Just open the software and...
  27. Replies
    3
    Views
    731

    Re: overclocking intel core i7-4770k

    You dont have to use the Ai Suite feature for overclocking, just overclock manually in the BIOS. Also it could be possible that your overclock might be too high. You just need to raise the multiplier...
  28. Replies
    3
    Views
    1,041

    Re: Thermalright cooler or Antec cooler

    Since you are going to overclock your CPU then you will have to go for something high end. The best one you can go for will be the Antec Kühler H2O 620 for a price of $40 approximately. I had this...
  29. Replies
    4
    Views
    1,789

    Re: Antec 550w for GTX 770

    It was metioned that if you want to run a Single Gtx 770 video card then a minimum of a 600 watt power supply is required. Note that the PSU will also need to have a +12 Volt continuous current...
  30. Re: problem with overclocking fx-8350 on Gigabyte 990FXA-UD3

    Can you try to update the BIOS of the motherboard and after that also set LLC to the most highest setting. Also remember not to use offset vcore, just set "voltage switch" at highest setting that...
  31. Replies
    3
    Views
    926

    Re: AMD FX-8320 processor overclocking

    How much watt is your Power Supply and what is its make and model? If it is anything above 550W minimum, then you can use different stress tests from various software available like the Intel Burn...
  32. Re: Is the stock heatsink of Haswell processor good

    Incase the heatsink is like the Ivy or Sandy type stock coolers then you will definitely need a cooler. I would recommend you to get a COOLER MASTER Hyper 212 Plus which will cost you as low as $30....
  33. Replies
    3
    Views
    1,111

    Re: Antec TruePower 550W for HD 7950

    I have looked at you setup and after researching for how much PSU watts your computer build should require, I found that Antec TruePower 550W is more than sufficient for your rig. It will be good...
  34. Replies
    3
    Views
    835

    Re: i5 3570k overclocking wont pass 4.1ghz

    Can you give us some more information about what BIOS settings are you using? Also what is the voltage and LLC/offset settings you are adjusting? What is the make and model of the power supply you...
  35. Replies
    3
    Views
    1,064

    Re: How to overclock Intel Core i5-4670k

    Can you try to look for the Speedstep or EIST and have those disabled as well. I dont know about an Asrock motherboard but I dont think where is that options exactly. You can also try to check the...
  36. Re: Intel Haswell Processor compatible with Hyper 212 Plus

    The Hyper 212 Plus supports the LGA1155 sockets and Haswell will use socket LGA1150 which is confirmed by Intel. So, I doubt whether LGA1150 will have the same mounting specification as the LGA1155...
  37. Re: mount Corsair H100 CPU Cooler in Antec 1100 case

    I have found that the best place to fit Corsair H100 CPU Cooler in Antec 1100 case would be the space given for the 240mm radiator at the top that is used by the two 120mm internal intake fan slots,...
  38. Replies
    3
    Views
    676

    Re: AMD FX 9000 @ 4.8 GHz / 5.0 GHz

    Even if you get that much of overclocking rate, the motherboard to run these CPUs will be very costly. Right now most of the available boards wont be able to handle it and also will not push more...
  39. Re: What is the idle temperature of AMD Phenom II X2 555

    I have heard that the AMD Phenom II X2 555 maximum temperature is 70C, so the temps that you are getting are normal if the load temp is only hitting 52C. Also, does your cabinet have ventilation...
  40. Replies
    3
    Views
    993

    Re: Antec 620 or Cooler Master Hyper 212+

    Well, there is no doubt that Antec 620 is the best cooler if compared with Cooler Master Hyper 212+. Also, most of the system differ from each other even with the same parts, so you will have to try...
  41. Replies
    3
    Views
    692

    Re: overclocking Amd A4-3305M APU

    Actually, there is a turbo frequency of the CPU chip which is set at 2.5ghz so when you are doing some intensive processing in your notebook, then it automatically changes its speed to that. So, it...
  42. Replies
    3
    Views
    1,654

    Re: How to overclock Kingston DDR3 RAM

    What exactly you want to overclock, your RAM or your processor? Maybe if you could tell us what motherboard model you have we could be able to help you. As for the Kingston RAM's, I have heard that...
  43. Replies
    3
    Views
    640

    Re: Unable to overclock AMD FX-4170

    The maximum safe voltage that you should go over would be around 1.5V or low for a 32nm chip only and not more than that. It will be quite high to reach atleast 4.6ghz overclock. Incase if you face...
  44. Re: is Antec Kühler H2O 920 compatible with Gigabyte GA-970A-D3

    Well, I think that the Antec Kühler H2O 920 will fit in the Gigabyte GA-970A-D3 and it will also cover the AMD chips very well. The cooler will not take too much of space like any other air coolers...
  45. Replies
    3
    Views
    617

    Re: How to overclock Q6600 to 3.2GHz and more

    Well, you havent mentioned that whether you are using a CPU cooler or not? I would bet due to the summer season your CPU might be heating up due to overclocking and hence you are getting the crashing...
  46. Replies
    3
    Views
    790

    Re: How to overclock HD 7850 2GB

    You can also use MSI Afterburner which is a software to manage the settings for your graphics card. With a neat interface, MSI Afterburner is a software for monitoring and overclocking. It includes a...
  47. Replies
    3
    Views
    1,228

    Re: Antec 620W vs OCZ 700w Power Supply

    The Antec HCG-620M 620W power supply has the perfect combination of power and efficiency. Antec High Current Gamer features special High Current connectors for heavy load and cabling that supply...
  48. Replies
    3
    Views
    1,107

    Re: antec eleven hundred cabinets fan very noisy

    I think that antec has got 3 position fan speed switch on the back of the cabinet, so that you can plug the fans into the hub and then power the hub with a 4 pin molex connector from the power supply...
  49. Replies
    3
    Views
    1,666

    Re: is Kingston SSDNow V200 worth-it?

    While testing the SSDNow V200 with the HyperX model SSDs, the prior was able to surpass in some tests that we conducted by some small margins. Actually the HyperX models are also better in many cases...
  50. Re: Due to overvoltage 1.8000, CPU fried, is my mobo dead too?

    I don’t know how you got your voltage so high. BIOS restrict the voltage to a specific level that is usually lower than 1.8 V. Maybe you are using CPU of 21x class which allows such high voltage. I...
Results 1 to 50 of 500
Page 1 of 10 1 2 3 4
Page generated in 1,710,829,839.31260 seconds with 33 queries