The Newly arrived Cooler Master makes a good little while now. They have learned from their experiences and criticisms of their clients, HAF-932 would be the ultimate box? That is what we wanted to verify.
In this Article I have considered the Strong Points about the Cooler Master HAF-932 Case.
- Test case Cooler Master HAF-932
- Exterior
- Interior
- Montage
- Breakdown
- Results
- Conclusion
The Computex is an opportunity for Cooler Master to present its latest developments. The manufacturer describes as his stand on the HAF 932, a housing look rather simple and basic, which suddenly breaks with rounded buttons and tuning currently in vogue.
Three 200mm fans one in front, one on the side door and another on the upper.Apparently crazy for cooling, it will be possible to replace the 200mm by four 120mm on the side door.
Following are the details regarding COOLING SYSTEM of HAF932.
Opportunity to place a 240mm radiator in place of 200mm which is located on the upper side of CoolerMaster. Known for HAF High Air Flow, this model loads three 200 mm fans at the front, above and below the box and a 120 mm fan at the rear. The fan side may be replaced by four 92 mm against two for the top. The food can be placed at the bottom or top of the box. And the roof may also host a radiator cooling liquid passages for the pipes are present at the rear and top.
A small hatch is present on the basket of the motherboard for access to fixations hope that they correspond to dismantle large heatpipe without removing the motherboard.
All the editing is done without tools. Note the presence of four USB ports, one eSATA port, a FireWire port and audio ports on the front. Finally, CoolerMaster has had the good idea to leave an opening to support the motherboard that can change the sink without removing the motherboard. The housing CoolerMaster HAF 932 will be sold around 10,000 INR.
Bookmarks