LLTD Responder won't install

Today, I hooked up my new HP laptop running Vista Home Premium (64bit).
I have two other 32 bit computers I want to network, each of them
running XP with SP2 and SP3.

Finding the existing internet connection on my XP desktop was a snap.
However, I can't see the other computers. Microsoft says I need to
install LLTD Responder protocol on the XP machines.

I downloaded the protocol form Microsoft. So far, so good.

When I try to install on the XP SP3 machine, the program aborts, stating
my SP version doesn't need the file.

Now what do I do?

Thanks for your help.


--
Many men go fishing all of their lives
without knowing that it is not fish
they are after.
~Henry David Thoreau

"Lu Powell" <xyzlupowell@abccomcast.net> wrote in message
news:%23JGksRsuIHA.4736@TK2MSFTNGP04.phx.gbl...
> Today, I hooked up my new HP laptop running Vista Home Premium (64bit). I
> have two other 32 bit computers I want to network, each of them running XP
> with SP2 and SP3.
>
> Finding the existing internet connection on my XP desktop was a snap.
> However, I can't see the other computers. Microsoft says I need to
> install LLTD Responder protocol on the XP machines.
>
> I downloaded the protocol form Microsoft. So far, so good.
>
> When I try to install on the XP SP3 machine, the program aborts, stating
> my SP version doesn't need the file.
>
> Now what do I do?
>
> Thanks for your help.

I think SP3 for XP actually already includes it (I'm not sure as I already
had it installed long before I installed SP3). You should be able to see it
in the Properties of your WLAN/LAN connection in Network Connections.

ss.

"Synapse Syndrome" <synapse@NOSPAMsyndrome.me.uk> wrote in message
news:%23wq50VsuIHA.5892@TK2MSFTNGP02.phx.gbl...
>> Today, I hooked up my new HP laptop running Vista Home Premium (64bit). I
>> have two other 32 bit computers I want to network, each of them running
>> XP with SP2 and SP3.
>>
>> Finding the existing internet connection on my XP desktop was a snap.
>> However, I can't see the other computers. Microsoft says I need to
>> install LLTD Responder protocol on the XP machines.
>>
>> I downloaded the protocol form Microsoft. So far, so good.
>>
>> When I try to install on the XP SP3 machine, the program aborts, stating
>> my SP version doesn't need the file.
>>
>> Now what do I do?
>>
>> Thanks for your help.
>
> I think SP3 for XP actually already includes it (I'm not sure as I already
> had it installed long before I installed SP3). You should be able to see
> it in the Properties of your WLAN/LAN connection in Network Connections.


Oh, by the way, I found a way to install the LLTD Responder on Windows
Server 2003 as well, if anybody is interested. It completes the picture on
my network map quite nicely.

ss.

I had this same problem and am still trying to get Microsoft support to
determine why it does not seem to be in SP3 like they say.
However, I found two ways to deal with it.
1. If you install the LLTD before you install SP3, it works fine.

2. After installing SP3 or when you do a fresh install of XP SP3, even
though the protocol won't self install you can install it youself by first
extracting the files from the windowsXP-KB922120-v5-ENU.exe file. See this
article.
http://support.microsoft.com/kb/828030

In the folder where you extract to you will find a folder SP2QFE.
Open this and you will find the required files.


Then copy the rspndr.sys to C:\Windows\System32\Drivers folder,
rspndr.exe to C:\Windows\System32 folder.
rspndr.inf (inside ip folder) to C:\Windows\Inf folder
Then open a Command prompt and navigate to the C:\Windows\System32 folder
and type rspndr.exe -i This will install the LLTD responder.


--
Paul


"Lu Powell" wrote:

> Today, I hooked up my new HP laptop running Vista Home Premium (64bit).
> I have two other 32 bit computers I want to network, each of them
> running XP with SP2 and SP3.
>
> Finding the existing internet connection on my XP desktop was a snap.
> However, I can't see the other computers. Microsoft says I need to
> install LLTD Responder protocol on the XP machines.
>
> I downloaded the protocol form Microsoft. So far, so good.
>
> When I try to install on the XP SP3 machine, the program aborts, stating
> my SP version doesn't need the file.
>
> Now what do I do?
>
> Thanks for your help.
>
>
> --
> Many men go fishing all of their lives
> without knowing that it is not fish
> they are after.
> ~Henry David Thoreau
>
>
>

That install did the trick. Thanks.


"PaulB" <PaulB@discussions.microsoft.com> wrote in message
news:5ACB51AC-18D6-4606-B2D4-2E5DF04A4030@microsoft.com...
>I had this same problem and am still trying to get Microsoft support to
> determine why it does not seem to be in SP3 like they say.
> However, I found two ways to deal with it.
> 1. If you install the LLTD before you install SP3, it works fine.
>
> 2. After installing SP3 or when you do a fresh install of XP SP3, even
> though the protocol won't self install you can install it youself by
> first
> extracting the files from the windowsXP-KB922120-v5-ENU.exe file. See
> this
> article.
> http://support.microsoft.com/kb/828030
>
> In the folder where you extract to you will find a folder SP2QFE.
> Open this and you will find the required files.
>
>
> Then copy the rspndr.sys to C:\Windows\System32\Drivers folder,
> rspndr.exe to C:\Windows\System32 folder.
> rspndr.inf (inside ip folder) to C:\Windows\Inf folder
> Then open a Command prompt and navigate to the C:\Windows\System32
> folder
> and type rspndr.exe -i This will install the LLTD responder.
>
>
> --
> Paul
>
>
> "Lu Powell" wrote:
>
>> Today, I hooked up my new HP laptop running Vista Home Premium
>> (64bit).
>> I have two other 32 bit computers I want to network, each of them
>> running XP with SP2 and SP3.
>>
>> Finding the existing internet connection on my XP desktop was a snap.
>> However, I can't see the other computers. Microsoft says I need to
>> install LLTD Responder protocol on the XP machines.
>>
>> I downloaded the protocol form Microsoft. So far, so good.
>>
>> When I try to install on the XP SP3 machine, the program aborts,
>> stating
>> my SP version doesn't need the file.
>>
>> Now what do I do?
>>
>> Thanks for your help.
>>
>>
>> --
>> Many men go fishing all of their lives
>> without knowing that it is not fish
>> they are after.
>> ~Henry David Thoreau
>>
>>
>>

You are welcome.
--
Paul


"Lu Powell" wrote:

> That install did the trick. Thanks.
>
>
> "PaulB" <PaulB@discussions.microsoft.com> wrote in message
> news:5ACB51AC-18D6-4606-B2D4-2E5DF04A4030@microsoft.com...
> >I had this same problem and am still trying to get Microsoft support to
> > determine why it does not seem to be in SP3 like they say.
> > However, I found two ways to deal with it.
> > 1. If you install the LLTD before you install SP3, it works fine.
> >
> > 2. After installing SP3 or when you do a fresh install of XP SP3, even
> > though the protocol won't self install you can install it youself by
> > first
> > extracting the files from the windowsXP-KB922120-v5-ENU.exe file. See
> > this
> > article.
> > http://support.microsoft.com/kb/828030
> >
> > In the folder where you extract to you will find a folder SP2QFE.
> > Open this and you will find the required files.
> >
> >
> > Then copy the rspndr.sys to C:\Windows\System32\Drivers folder,
> > rspndr.exe to C:\Windows\System32 folder.
> > rspndr.inf (inside ip folder) to C:\Windows\Inf folder
> > Then open a Command prompt and navigate to the C:\Windows\System32
> > folder
> > and type rspndr.exe -i This will install the LLTD responder.
> >
> >
> > --
> > Paul
> >
> >
> > "Lu Powell" wrote:
> >
> >> Today, I hooked up my new HP laptop running Vista Home Premium
> >> (64bit).
> >> I have two other 32 bit computers I want to network, each of them
> >> running XP with SP2 and SP3.
> >>
> >> Finding the existing internet connection on my XP desktop was a snap.
> >> However, I can't see the other computers. Microsoft says I need to
> >> install LLTD Responder protocol on the XP machines.
> >>
> >> I downloaded the protocol form Microsoft. So far, so good.
> >>
> >> When I try to install on the XP SP3 machine, the program aborts,
> >> stating
> >> my SP version doesn't need the file.
> >>
> >> Now what do I do?
> >>
> >> Thanks for your help.
> >>
> >>
> >> --
> >> Many men go fishing all of their lives
> >> without knowing that it is not fish
> >> they are after.
> >> ~Henry David Thoreau
> >>
> >>
> >>
>
>
>

I have the same problem, but when I attempt to install the LLTD it errors with:

pINetCfgClassSetup->Install failed to install MS_RSPNDR: 800f0203
Failed to install lltd driver

Any Ideas?

"PaulB" wrote:

> You are welcome.
> --
> Paul
>
>
> "Lu Powell" wrote:
>
> > That install did the trick. Thanks.
> >
> >
> > "PaulB" <PaulB@discussions.microsoft.com> wrote in message
> > news:5ACB51AC-18D6-4606-B2D4-2E5DF04A4030@microsoft.com...
> > >I had this same problem and am still trying to get Microsoft support to
> > > determine why it does not seem to be in SP3 like they say.
> > > However, I found two ways to deal with it.
> > > 1. If you install the LLTD before you install SP3, it works fine.
> > >
> > > 2. After installing SP3 or when you do a fresh install of XP SP3, even
> > > though the protocol won't self install you can install it youself by
> > > first
> > > extracting the files from the windowsXP-KB922120-v5-ENU.exe file. See
> > > this
> > > article.
> > > http://support.microsoft.com/kb/828030
> > >
> > > In the folder where you extract to you will find a folder SP2QFE.
> > > Open this and you will find the required files.
> > >
> > >
> > > Then copy the rspndr.sys to C:\Windows\System32\Drivers folder,
> > > rspndr.exe to C:\Windows\System32 folder.
> > > rspndr.inf (inside ip folder) to C:\Windows\Inf folder
> > > Then open a Command prompt and navigate to the C:\Windows\System32
> > > folder
> > > and type rspndr.exe -i This will install the LLTD responder.

I originally had that problem because I forgot to copy the rspndr.inf file to
the Windows Inf folder.
--
Paul


"TrackerX55" wrote:

> I have the same problem, but when I attempt to install the LLTD it errors with:
>
> pINetCfgClassSetup->Install failed to install MS_RSPNDR: 800f0203
> Failed to install lltd driver
>
> Any Ideas?
>
> "PaulB" wrote:
>
> > You are welcome.
> > --
> > Paul
> >
> >
> > "Lu Powell" wrote:
> >
> > > That install did the trick. Thanks.
> > >
> > >
> > > "PaulB" <PaulB@discussions.microsoft.com> wrote in message
> > > news:5ACB51AC-18D6-4606-B2D4-2E5DF04A4030@microsoft.com...
> > > >I had this same problem and am still trying to get Microsoft support to
> > > > determine why it does not seem to be in SP3 like they say.
> > > > However, I found two ways to deal with it.
> > > > 1. If you install the LLTD before you install SP3, it works fine.
> > > >
> > > > 2. After installing SP3 or when you do a fresh install of XP SP3, even
> > > > though the protocol won't self install you can install it youself by
> > > > first
> > > > extracting the files from the windowsXP-KB922120-v5-ENU.exe file. See
> > > > this
> > > > article.
> > > > http://support.microsoft.com/kb/828030
> > > >
> > > > In the folder where you extract to you will find a folder SP2QFE.
> > > > Open this and you will find the required files.
> > > >
> > > >
> > > > Then copy the rspndr.sys to C:\Windows\System32\Drivers folder,
> > > > rspndr.exe to C:\Windows\System32 folder.
> > > > rspndr.inf (inside ip folder) to C:\Windows\Inf folder
> > > > Then open a Command prompt and navigate to the C:\Windows\System32
> > > > folder
> > > > and type rspndr.exe -i This will install the LLTD responder.
>

that did the trick
Thank you


"PaulB" wrote:

> I originally had that problem because I forgot to copy the rspndr.inf file to
> the Windows Inf folder.
> --
> Paul
>
>
> "TrackerX55" wrote:
>
> > I have the same problem, but when I attempt to install the LLTD it errors with:
> >
> > pINetCfgClassSetup->Install failed to install MS_RSPNDR: 800f0203
> > Failed to install lltd driver
> >
> > Any Ideas?
> >
> > "PaulB" wrote:
> >
> > > You are welcome.
> > > --
> > > Paul
> > >
> > >
> > > "Lu Powell" wrote:
> > >
> > > > That install did the trick. Thanks.
> > > >
> > > >
> > > > "PaulB" <PaulB@discussions.microsoft.com> wrote in message
> > > > news:5ACB51AC-18D6-4606-B2D4-2E5DF04A4030@microsoft.com...
> > > > >I had this same problem and am still trying to get Microsoft support to
> > > > > determine why it does not seem to be in SP3 like they say.
> > > > > However, I found two ways to deal with it.
> > > > > 1. If you install the LLTD before you install SP3, it works fine.
> > > > >
> > > > > 2. After installing SP3 or when you do a fresh install of XP SP3, even
> > > > > though the protocol won't self install you can install it youself by
> > > > > first
> > > > > extracting the files from the windowsXP-KB922120-v5-ENU.exe file. See
> > > > > this
> > > > > article.
> > > > > http://support.microsoft.com/kb/828030
> > > > >
> > > > > In the folder where you extract to you will find a folder SP2QFE.
> > > > > Open this and you will find the required files.
> > > > >
> > > > >
> > > > > Then copy the rspndr.sys to C:\Windows\System32\Drivers folder,
> > > > > rspndr.exe to C:\Windows\System32 folder.
> > > > > rspndr.inf (inside ip folder) to C:\Windows\Inf folder
> > > > > Then open a Command prompt and navigate to the C:\Windows\System32
> > > > > folder
> > > > > and type rspndr.exe -i This will install the LLTD responder.
> >

You are welcome.
--
Paul


"TrackerX55" wrote:

> that did the trick
> Thank you
>
>
> "PaulB" wrote:
>
> > I originally had that problem because I forgot to copy the rspndr.inf file to
> > the Windows Inf folder.
> > --
> > Paul
> >
> >
> > "TrackerX55" wrote:
> >
> > > I have the same problem, but when I attempt to install the LLTD it errors with:
> > >
> > > pINetCfgClassSetup->Install failed to install MS_RSPNDR: 800f0203
> > > Failed to install lltd driver
> > >
> > > Any Ideas?
> > >
> > > "PaulB" wrote:
> > >
> > > > You are welcome.
> > > > --
> > > > Paul
> > > >
> > > >
> > > > "Lu Powell" wrote:
> > > >
> > > > > That install did the trick. Thanks.
> > > > >
> > > > >
> > > > > "PaulB" <PaulB@discussions.microsoft.com> wrote in message
> > > > > news:5ACB51AC-18D6-4606-B2D4-2E5DF04A4030@microsoft.com...
> > > > > >I had this same problem and am still trying to get Microsoft support to
> > > > > > determine why it does not seem to be in SP3 like they say.
> > > > > > However, I found two ways to deal with it.
> > > > > > 1. If you install the LLTD before you install SP3, it works fine.
> > > > > >
> > > > > > 2. After installing SP3 or when you do a fresh install of XP SP3, even
> > > > > > though the protocol won't self install you can install it youself by
> > > > > > first
> > > > > > extracting the files from the windowsXP-KB922120-v5-ENU.exe file. See
> > > > > > this
> > > > > > article.
> > > > > > http://support.microsoft.com/kb/828030
> > > > > >
> > > > > > In the folder where you extract to you will find a folder SP2QFE.
> > > > > > Open this and you will find the required files.
> > > > > >
> > > > > >
> > > > > > Then copy the rspndr.sys to C:\Windows\System32\Drivers folder,
> > > > > > rspndr.exe to C:\Windows\System32 folder.
> > > > > > rspndr.inf (inside ip folder) to C:\Windows\Inf folder
> > > > > > Then open a Command prompt and navigate to the C:\Windows\System32
> > > > > > folder
> > > > > > and type rspndr.exe -i This will install the LLTD responder.
> > >

Synapse Syndrome;837440 Wrote:
> "Synapse Syndrome" <synapse@NOSPAMsyndrome.me.uk> wrote in message
> news:%23wq50VsuIHA.5892@TK2MSFTNGP02.phx.gbl...
> >> Today, I hooked up my new HP laptop running Vista Home Premium
> (64bit). I
> >> have two other 32 bit computers I want to network, each of them
> running
> >> XP with SP2 and SP3.
> >>
> >> Finding the existing internet connection on my XP desktop was a
> snap.
> >> However, I can't see the other computers. Microsoft says I need to
> >> install LLTD Responder protocol on the XP machines.
> >>
> >> I downloaded the protocol form Microsoft. So far, so good.
> >>
> >> When I try to install on the XP SP3 machine, the program aborts,
> stating
> >> my SP version doesn't need the file.
> >>
> >> Now what do I do?
> >>
> >> Thanks for your help.
> >
> > I think SP3 for XP actually already includes it (I'm not sure as I
> already
> > had it installed long before I installed SP3). You should be able to
> see
> > it in the Properties of your WLAN/LAN connection in Network
> Connections.
>
>
> Oh, by the way, I found a way to install the LLTD Responder on Windows
> Server 2003 as well, if anybody is interested. It completes the
> picture on
> my network map quite nicely.
>
> ss.
Hi,- I would love to know how you did server 2003.-


--
JJI
Posted via http://www.vistaheads.com

First, I'd like to thank those who provided the info to install the responder manually. My config is off of a Verizon FIOS: PC7 is a laptop Vista Home Prem SP1, PC3 is a laptop XP Tablet PC 2005 SP3, PC6 is a desktop XP Pro SP2, PC5 is a desktop XP Pro SP3. The non-vista PCs see each other and can map to each other, they still show the Vista PC in the Microsoft Network List, but gets not-permitted when trying to map. On the Vista machine the full network map shows all PCs, but don't show anywhere else for mapping.

Basically HELP !!

Thank you for this thread, my problem got partially solved by this.
The Vista Laptop does recognise the Xp one and now I can use the
printer. (very important :-).

The XP computer can't acces the Vista one but I wil keep working at it
maybe a litttle problem still.

Thanks and greetings
Inge


--
goosjein

try running the "Network Setup Wizard" on the XP computer.


"goosjein" <guest@unknown-email.com> wrote in message
news:8e2bbac722c5e0624fe8ef52ad6a1042@nntp-gateway.com...
>
> Thank you for this thread, my problem got partially solved by this.
> The Vista Laptop does recognise the Xp one and now I can use the
> printer. (very important :-).
>
> The XP computer can't acces the Vista one but I wil keep working at it
> maybe a litttle problem still.
>
> Thanks and greetings
> Inge
>
>
> --
> goosjein