Update will NOT Install (KB928367)
Security Update for Microsoft .NET Framework, Version 1.0 Service Pack 3
(KB928367)
Computer constantly alerting me of this important update, I click it to
install, it says it's installing but then after 30 seconds tells me that it
failed and was not installed. I turn off the computer, tells me it is
installing updates, I turn it back on to find the annoying alert of the same
update. Why won't this install? I've tried turning off Norton and any other
firewalls but to no avail.
I have Windows XP Version 2002 with Service Pack 2.
Anyone have any suggestions??
Thank you in advance
Re: Update will NOT Install (KB928367)
For you (1), (4)-(6)...
(1) You need to repair .NET Framework 1.1 - obliterating all remnants of it
and installing it/patching it fully.
How to troubleshoot Microsoft .NET Framework 1.1 installation issues
http://support.microsoft.com/kb/824643
- Unregister and then reregister Windows Installer (See article)
- Manually remove and then reinstall the .NET Framework 1.1 (See Article)
For the articles below, follow the "IT professionals" link and find the
download for your OS.
- Download/Install http://support.microsoft.com/kb/867460/
- Download/Install http://support.microsoft.com/kb/886903/
- Download/Install http://support.microsoft.com/kb/928366/
Reboot as needed and at the end.
(2) You need to repair .NET Framework 2.0 - obliterating all remnants of it
and installing it/patching it fully.
How to troubleshoot Microsoft .NET Framework 2.0 installation issues
http://support.microsoft.com/kb/908077/
- Unregister and then reregister Windows Installer (See article)
- Manually remove and then reinstall the .NET Framework 2.0 (See Article)
For the articles below, follow the "IT professionals" link and find the
download for your OS.
- Download/Install http://support.microsoft.com/kb/917283/
- Download/Install http://support.microsoft.com/kb/922770/
- Download/Install http://support.microsoft.com/kb/928365/
Reboot as needed and at the end.
(3) You need to repair .NET Framework 3.0 - obliterating all remnants of it
and installing it/patching it fully.
Unfortunately - there is no particular article pertaining to .NET Framework
3.0 that I could find. I have not had issues, however, just going into the
Control Panel --> Add or Remove Programs and just locating/removing it and
its patches. I suggest you do the same and then reboot...
Download/install using this distributable package:
http://www.microsoft.com/downloads/d...displaylang=en
Reboot as needed and at the end.
(4) Cleanup your updates system...
Get Dial-a-Fix:
http://wiki.djlizard.net/Dial-a-fix
Use its options to fix:
- Windows Installer
- Windows Update
- All the Registration Center options
Turn off the "Empty System32\Catroot 2"
Do NOT do "Flush SoftwareDistribution".
Then click "GO"... May take a while.
Reboot when it is done...
(5) Visit http://windowsupdate.microsoft.com/ and scan for updates. Choose
the critical updates you need and install them. Do not bother getting
hardware updates (unless you happen to have some Microsoft hardware
installed) and "Optional Updates" are *usually* just what the name infers -
but feel free to see if you want any of the "Optional" ones.
(6) Come back here and let us know how you faired.
Re: Update will NOT Install (KB928367)
I am having the same issue, so it's not just one person's problem it's the
update that has the problem.
Re: Update will NOT Install (KB928367)
Your point is?
It only takes a Google search to make that realization - but it does not
mean providing help when asked should be avoided. Therefore - I provide a
work-around solution that should get the OP (and many others) past this
little issue and on with their lives.
Should it be Microsoft's obligation to correct the problem with the
patch(es) and perhaps even come out with something that just runs/fixes it?
Sure.
Does it exist as of this moment? AFAIK - no.
So should I just sit and not help until Microsoft comes up with something
for everyone? No.
Thanks for your comments.
Re: Update will NOT Install (KB928367)
No offense, but how about MS, repair it's OWN damn update ?
Obviously, many, many folks are having this same issue. This group has been
loaded with complaints, for the same issue, since it was released. They
didn't test it, evidently just threw it up there.
I have always, been very careful, to keep my Windows XP Pro system properly
maintained, and updates properly installed.
I have uninstalled and reinstalled the net frameworks, with the same end
result. I have painstakenly followed some of the solutions posted on this
group, steps a windows user should NOT have to go through to run an update.
This update, just will not install for me.
I have now hidden, this broken update.
Re: Update will NOT Install (KB928367)
hello,
Not sure but try the following
go to C:\WINDOWS\SoftwareDistribution\Download\Install
you should find NDP1.1sp1-KB928366-X86.exe
if not you can re-get the file here
http://www.microsoft.com/downloads/d...f-0455d2d9ebfb
Extract it with winzip you'll get 3 files :
Microsoft.WindowsInstaller.dll
Microsoft.WindowsInstaller.Package.dll
PatchExec.exe
Now extract patchexec.exe with winzip you(ll get 1 file
patch.msp
Right click on patch.msp
windows installer will tell you the package is invalid.
So i think the patch can not install at all.
Of course re-installing the whole windows, or the .net 1.1 or 1.2 will solve
the proble if the fix is included in the full package... and then 928366 will
not be needed anymore... But when needed 928366 will never install ...
because it's corrupt from the beginning
or if it's not corrupt it's perhaps an installer issue ... but the installer
works very well with other apps.
I would prefer microsoft fix his 88 ko patch than re-install 2Gb of .net ....
I'll wait until they patch the patch. ;-)
RE: Update will NOT Install (KB928367)
I received the following fix from Betty Hong of Microsoft Windows Update
Support. I followed her instructions and the problem was eliminated. I was
then able to install critical update KB928367 with no problems. Good luck.
Step 1: Use third party tool to remove the .NET Framework 1.0
==================================================
1. Please download the .NET Framework Cleanup Tool from the following link:
http://astebner.sts.winisp.net/Tools...eanup_tool.zip
Please Note: Microsoft provides third-party contact information to help you
find technical support. This contact information may change without notice.
Microsoft does not guarantee the accuracy of this third-party contact
information.
2. Unzip the zip file and then close all the open windows.
3. Double click Cleanup_tool.exe to run it, and then select the .Net
Framework 1.0 in the list box. Click “OKâ€, click “Yesâ€, and click “Cleanup
Now†to remove it completely.
After that, please restart the computer and perform the following
suggestions to reinstall .NET framework 1.0 and the updates for it.
Step 2: Install .NET Framework 1.0 Redistributable Package and .Net
Framework 1.0 SP3
=================================================================
1. Please download the Microsoft .NET Framework Version 1.0 Redistributable
Package from the following link and save it to the C drive (C:\)
Microsoft .NET Framework Redistributable 1.0
http://download.microsoft.com/downlo...tnetredist.exe
Microsoft .NET Framework 1.0 Service Pack 3
http://download.microsoft.com/downlo...61-X86-Enu.exe
Security Update for Microsoft .NET Framework, Version 1.0 Service Pack 3
(KB928367)
http://www.download.windowsupdate.co...c82f3ac86e.exe
2. When the File download window appears, please click the Save button, and
then follow the directions to save the .NET Framework 1.0 setup file on your
computer, then double-click the .NET Framework file to install it.
Re: Update will NOT Install (KB928367)
Hi All...
I have tried every fix listed and then some on two different
computers. I sent the following to
I have been working on this issue (searching KB, Blogs etc) trying
suggested "Fixes" for three days and still have NO RESOLUTION. I have
four other workstations here at work with the same issue and need to
get a fix as soon as possible. I also do not want to go through three
days of trial and error for each of the remaining workstations.
I have ran the clean up tool, tried suggestions at http://support.microsoft.com/?id=320112
and http://support.microsoft.com/kb/824643, ran the Dial-a-fix and the
update still fails.
Since I provide technical support for these computers for users at a
call center, it is difficult to find large blocks of time to ask the
user to give up their PC, especially if there is no fix. I have tried
contacting Microsoft and basically was told to try the same things I
had told them I had already tried.
Does anyone have any new suggestions?? At this point, I will be
FOREVER grateful to anyone that provides a workable solution.....
Thank You
Re: Update will NOT Install (KB928367)
If Shenan Stanley does not like people--does not like HELPING people--enough to leave out the sarcasm and "mightier and smarter than thou, and thou, and thou" rhetoric (note his 15-07-2007; 12:44 PM post), maybe he should leave it to those who do. Or would that eliminate his only way to feel superior than others?
RE: Update will NOT Install (KB928367)
I have the same problem with XP service pack 3 and have not been able to make the problem go away.