Re: Error number: 0xC80001FE
Dave,
Right click the WindowsUpdate.log located in the WINDOWS directory
(folder) and choose Properties. How large is it ? (Size on disk)
Close the log, go to Start > Run > type in
regsrv32 wuaueng.dll
Click OK. You should get a message that the file was correctly registered.
MowGreen [MVP 2003-2007]
===============
*-343-* FDNY
Never Forgotten
===============
Dave Power wrote:
> When I attempt to run Windows update. I get the above error, and the
> following error message recorded in the Application Event Log
>
> wuaueng.dll (1488) Unable to create the log. The drive may be read-only, out
> of disk space, misconfigured, or corrupted. Error -1032.
>
> Configuration: Windows 2000 SP4
Re: Error number: 0xC80001FE
Thanks for the suggestion. I've renamed the log file (it was 1586k ,long.)
I'm now getting stuck with the 0x80040206 / 0x8007041d error sequence on the
system. I've looked through the entries and cannot find any response to
problems raised. Config is running SP4 with McAffee Security Centre v7
installed (but disabled)
2006-11-05 22:06:41 916 a0c Misc = Process: C:\WINNT\system32\svchost.exe
2006-11-05 22:06:41 916 a0c Misc = Module: C:\WINNT\system32\wuaueng.dll
2006-11-05 22:06:41 916 a0c Service *************
2006-11-05 22:06:41 916 a0c Service ** START ** Service: Service startup
2006-11-05 22:06:41 916 a0c Service *********
2006-11-05 22:06:41 916 a0c Agent * WU client version 5.8.0.2469
2006-11-05 22:06:41 916 a0c Agent * SusClientId =
'14cb8606-d965-47c4-bbff-59d7cc9094ca'
2006-11-05 22:06:41 916 a0c Agent * Base directory:
C:\WINNT\SoftwareDistribution
2006-11-05 22:06:41 916 a0c Agent * Access type: No proxy
2006-11-05 22:06:41 916 a0c Agent * FATAL: Failed to initialize with
error 0x80040206 from component Event subsystem
2006-11-05 22:06:41 916 a0c Service FATAL: Failed to initialize WU client:
0x80040206
2006-11-05 22:06:41 916 a0c Service *********
2006-11-05 22:06:41 916 a0c Service ** END ** Service: Service exit
[Exit code = 0x80040206]
2006-11-05 22:06:41 916 a0c Service *************
2006-11-05 22:07:11 2436 99c Setup FATAL: Warning: Failed to restart
wuauserv service: 0x8007041d
2006-11-05 22:07:11 2436 99c Setup * WARNING: Exit code = 0x8007041D
2006-11-05 22:07:11 2436 99c Setup *********
2006-11-05 22:07:11 2436 99c Setup ** END ** Setup: Installing client
binaries
2006-11-05 22:07:11 2436 99c Setup *************
2006-11-05 22:07:11 2436 99c Setup FATAL: InstallUpdatedBinaries failed with
error 0x8007041d
2006-11-05 22:07:11 2436 99c WUWeb FATAL: InstallUpdatedBinaries failed with
error:0x8007041d
2006-11-05 22:07:11 2436 99c WUWeb FATAL: UpdateClientWorker failed: error
0x8007041d
HELP
"MowGreen [MVP]" wrote:
> Dave,
>
> Right click the WindowsUpdate.log located in the WINDOWS directory
> (folder) and choose Properties. How large is it ? (Size on disk)
> Close the log, go to Start > Run > type in
>
> regsrv32 wuaueng.dll
>
> Click OK. You should get a message that the file was correctly registered.
>
>
> MowGreen [MVP 2003-2007]
> ===============
> *-343-* FDNY
> Never Forgotten
> ===============
>
>
> Dave Power wrote:
>
> > When I attempt to run Windows update. I get the above error, and the
> > following error message recorded in the Application Event Log
> >
> > wuaueng.dll (1488) Unable to create the log. The drive may be read-only, out
> > of disk space, misconfigured, or corrupted. Error -1032.
> >
> > Configuration: Windows 2000 SP4
>
Re: Error number: 0xC80001FE
You receive a "0x8007041D" error when you visit the Windows Update Web site
http://support.microsoft.com/?scid=kb;en-us;902322
If this is not the case then check in the Event Viewer to see if there is any
specific errors regarding services
Start/Run/Eventvwr.msc
Posted by: Mila -
<snip> In my case it was wups.dll in
C:\WINDOWS\system32\SoftwareDistribution\Setup\ServiceStartup\wups.dll\5.8.0.2469
folder. After removing this file, windowsupdate works great.
Mila <snip>
Some additional information on this error from Torgeir, Microsoft MVP
<snip>
Hi,
If the things in TaurArian's post didn't apply or work, it is most likely a COM+
issue.
First, verify that the "COM+ Event System" service is not disabled or not
functioning:
Press Start and Run, and then run this command:
services.msc
Locate the "COM+ Event System" entry, and double click on it. Startup type should be
set to "Manual", and if the service is not already running, press the Start button to
see if it starts successfully.
If the steps above where ok, see if the steps in this previous post fixes the problem
(applies to WinXP as well):
From: DBQ <DBQ@discussions.microsoft.com>
Subject: Re: 0x8007041D W2K Server Try All
Date: Fri, 23 Sep 2005 14:30:03 -0700
Message-ID: <B7B2BCF2-44EB-46AA-95B1-00A42DCB35E1@microsoft.com>
Newsgroups: microsoft.public.windowsupdate
<quote>
We with a little help from MS It is fixed.
Two issued needed repairing.
1. COM+,
This required cleaning up a damaged COM+ catalog details at:
http://support.microsoft.com/?id=315296
2. Replacement of the HKEY_LOCAL_MACHINE\Software\Microsoft
\Windows NT\CurrentVersion\Svchost for another working machine.
</quote>
--
torgeir, Microsoft MVP Scripting and WMI, Porsgrunn Norway
<snip>
--
==================================
TaurArian [MS-MVP] 2005-2007 - Australia
==================================
http://www.dts-l.org/goodpost.htm
Need more help? http://support.microsoft.com/?scid=ph;en-us;6527
(Links to web pages and MSKB Articles are posted for the purposes of keeping the
information current)
"Dave Power" <DavePower@discussions.microsoft.com> wrote in message
news:3682D397-D967-47B1-87B4-BA9BFB0CCF51@microsoft.com...
| Thanks for the suggestion. I've renamed the log file (it was 1586k ,long.)
| I'm now getting stuck with the 0x80040206 / 0x8007041d error sequence on the
| system. I've looked through the entries and cannot find any response to
| problems raised. Config is running SP4 with McAffee Security Centre v7
| installed (but disabled)
|
| 2006-11-05 22:06:41 916 a0c Misc = Process: C:\WINNT\system32\svchost.exe
| 2006-11-05 22:06:41 916 a0c Misc = Module: C:\WINNT\system32\wuaueng.dll
| 2006-11-05 22:06:41 916 a0c Service *************
| 2006-11-05 22:06:41 916 a0c Service ** START ** Service: Service startup
| 2006-11-05 22:06:41 916 a0c Service *********
| 2006-11-05 22:06:41 916 a0c Agent * WU client version 5.8.0.2469
| 2006-11-05 22:06:41 916 a0c Agent * SusClientId =
| '14cb8606-d965-47c4-bbff-59d7cc9094ca'
| 2006-11-05 22:06:41 916 a0c Agent * Base directory:
| C:\WINNT\SoftwareDistribution
| 2006-11-05 22:06:41 916 a0c Agent * Access type: No proxy
| 2006-11-05 22:06:41 916 a0c Agent * FATAL: Failed to initialize with
| error 0x80040206 from component Event subsystem
| 2006-11-05 22:06:41 916 a0c Service FATAL: Failed to initialize WU client:
| 0x80040206
| 2006-11-05 22:06:41 916 a0c Service *********
| 2006-11-05 22:06:41 916 a0c Service ** END ** Service: Service exit
| [Exit code = 0x80040206]
| 2006-11-05 22:06:41 916 a0c Service *************
| 2006-11-05 22:07:11 2436 99c Setup FATAL: Warning: Failed to restart
| wuauserv service: 0x8007041d
| 2006-11-05 22:07:11 2436 99c Setup * WARNING: Exit code = 0x8007041D
| 2006-11-05 22:07:11 2436 99c Setup *********
| 2006-11-05 22:07:11 2436 99c Setup ** END ** Setup: Installing client
| binaries
| 2006-11-05 22:07:11 2436 99c Setup *************
| 2006-11-05 22:07:11 2436 99c Setup FATAL: InstallUpdatedBinaries failed with
| error 0x8007041d
| 2006-11-05 22:07:11 2436 99c WUWeb FATAL: InstallUpdatedBinaries failed with
| error:0x8007041d
| 2006-11-05 22:07:11 2436 99c WUWeb FATAL: UpdateClientWorker failed: error
| 0x8007041d
|
| HELP
|
|
| "MowGreen [MVP]" wrote:
|
| > Dave,
| >
| > Right click the WindowsUpdate.log located in the WINDOWS directory
| > (folder) and choose Properties. How large is it ? (Size on disk)
| > Close the log, go to Start > Run > type in
| >
| > regsrv32 wuaueng.dll
| >
| > Click OK. You should get a message that the file was correctly registered.
| >
| >
| > MowGreen [MVP 2003-2007]
| > ===============
| > *-343-* FDNY
| > Never Forgotten
| > ===============
| >
| >
| > Dave Power wrote:
| >
| > > When I attempt to run Windows update. I get the above error, and the
| > > following error message recorded in the Application Event Log
| > >
| > > wuaueng.dll (1488) Unable to create the log. The drive may be read-only, out
| > > of disk space, misconfigured, or corrupted. Error -1032.
| > >
| > > Configuration: Windows 2000 SP4
| >
Re: Error number: 0xC80001FE
Dave Power wrote:
> When I attempt to run Windows update. I get the above error, and the
> following error message recorded in the Application Event Log
>
> wuaueng.dll (1488) Unable to create the log. The drive may be read-only, out
> of disk space, misconfigured, or corrupted. Error -1032.
>
> Configuration: Windows 2000 SP4