how to configure mt841 modem for airtel wifi
I want help with my modem HUAWEI Sterlite smartax MT841. I am using it with the wired connection. It works perfectly for wired connection. I have tried to connect using wifi. But I can’t able to connect modem trough the wifi connection. I have tried this on the laptop. I have tried to change the settings but still can’t able to connect. I can’t able to view any of the sites but none of them is opening. Can anyone know how to configure this modem to connect using wifi.
Re: how to configure mt841 modem for airtel wifi
I have one solution for you. Try this it will enable your modem with wifi.
Try to configure setting again.
• First you must disable the security key. Try it without using security key.
• In settings check the mac address filter. It has to be disabled
• Check that you have the SSID for MT841.
Try this it will work to enable wifi with modem.
Re: how to configure mt841 modem for airtel wifi
You have to check this.
• The SSID of the modem MT841 has to be appearing on the wireless lan settings.it has to be appear on the settings.
• Now switch of the modem now check if other wifi network appears on it.
• Now try to turn of the other one and start the modem.
If it works then it good. If doesn’t then bad luck
Re: how to configure mt841 modem for airtel wifi
Thanks for trying to help me.
• I am not using any security key in settings.
• Mac address filter also disabled.
I am able to connect successfully through this modem but the modem can’t allow me to fetch the incoming data form web browser.
Re: how to configure mt841 modem for airtel wifi
I will help you try to do this setting
Go to advance in this go to ADSL now do the settings which I am telling.
• In EC/FDM Mode choose EC mode
• BitSwap must be disabled
• Now go to basic in it wlan
• SSID has to be MT814
• Set Channel to 6
• Set module to high
• Set WEP Method to WEP WPA-PSK
• Intra BSS Disabled
• SSID Hidden Enabled
• Now go to basic>connections
• Set PPPoE properties to VPI/VCI: 1/ 32
• Set Encapsulation to Muxed
• Set Default Route to Disabled
• Provide User Name As Password
• Use DNS: Disabled
Try to do this your laptop will connect perfectly through wifi to internet
Re: how to configure mt841 modem for airtel wifi
I have also faced such a problem while connecting to internet using this modem. I have tried this you can try to do this.
• Change the channel to no 11
• Now try to run the command prompt you can do this using. Start-> run-> cmd->enter
• Command prompt will open up
• Now type ipconfig /all in it.
• Copy or paste wlan data
• Also you have to change in network also
• Goto wlan and go to properties of it.
• In wlan card click on properties
• In this check the all the settings are enabled and advance settings are done correctly or not. Try to do this.
Re: how to configure mt841 modem for airtel wifi
You can follow this step to enable the wifi for modem
• Open internet explorer, type 192.168.1.1 in IE Address bar and press Enter.
• Type Username as admin and password as admin or keep it blank and press OK
• click on WLAN under Basic settings .
• In the SSID Text box, delete MT841 and type an ID (This is the ID with which Wireless Network is identified)
• Click on WPA-PSK Radio Button in WEP Method.
• Type a password in the WPA-PSK Key Box. click on Apply Button.
• click on the + mark by the side of Advanced.
• Click on ADSL.
• click on the drop down list of ADSL Modulation and select Multimode and Apply.
• Click on the - sign by the side of Advanced. The menu will collapse.
• click on the Save All button.
• Save and Reboot - message box will pops up click ok.
Now try to run it will work.