Printable View
This must be stickier from the time when it will as of what I can inform result everybody through HDMI>DVI by the use of the most up-to-date Nvidia drivers, it occurs to me with every one of Nvidia Forceware releases beginning from 191.xx. If you have simply installed the newest Nvidia drivers on Windows 7 x64 and your employing HDMI > DVI you have almost certainly just booted back into Windows through a resolution that's exact except looks dreadfully incorrect through in-proportional scaling.
But it just with the latest graphics card from Nvidia is not working, I was particularly frustrated already. I think it's understandable that older products are no longer supported by the manufacturers, if any bugs appear with newer drivers, and that the drivers of new devices are error-free is not immediately evident. However, that if errors in new products in the drivers are known, it is apparently not even trying to fix this, I think bold.
The trouble lies within the truth that the most up-to-date drivers distinguish whichever display connected all the way through hdmi like a HDTV. Therefore it won't permit the make use of the driver's built-in scaling options. I encompass a fix for this. It engages a bit of registry hacking, except it completely works. If you don't would like to adjust a few registry settings, downgrading to before time 17x.x drivers (otherwise older) must as well work
I misplaced my scaling option following moving in excess of to Windows 7 and advance to the most up-to-date drivers. Therefore I couldn't hang around to provide this workaround a go. Unluckily, I got trapped on the initial step. Phoenix cannot blemish whichever EDID for my monitor it's like if it's not there! It worked very well through that LCD, except at home, where I'm annoying to obtain this to work...no EDID, therefore this deception cannot be done.
NVIDIA Drivers for Windows Vista but are not at all for Windows 7 is designed to run even if they were Windows Display Driver Model (WDDM) is still there in the Windows Vista version of Windows 7 in it and used a newer model, the RC uses it already. Not everything is running perfectly, the 185.81 BETA drivers for running Windows 7 without any problems and are super stable.
Quite simply for the reason, if it works with other monitors, then it should work with the Syncmaster. The graphics card or the PC does nothing but monitor the EIDE, which is then processed. When scaling / interpolation, the monitor could also refuse if the graphics card already performs the scaling, then surely not? In the end, it is nevertheless. Either the graphics card interpolated to the native resolution and transfers it to the monitor or the monitor will do this. In other monitors, the second graphics card + Diablo work when this is not.
An old problem, which runs through several driver versions from Nvidia. Although I've recently read on an English language site, an explanation on the subject, the light did not necessarily responsible Nvidia and their drivers for the stuff. No matter. For some it helps. The TFT to intervene when Windows is already booted up completely. Rather rare. Better look over time after the scan utility from Nvidia, even execute, and the scaling should be possible to adjust again. Sometimes people have only until the next reboot, now at 175.16 with my long lasting selected (I had also only been with the years