Corsair Hydro Series H70 vs. Antec KUHLER H2O 920 for closed water cooling system

Hey guys I am having a customized home built system. I am using Windows Xp operating system, MSI P55-GD80 mother board with i5 760 4.0Ghz @ 1.26v.now I am thinking to purchase a new cooling system for my system. I am little bit confused between the two of them: Corsair Hydro Series H70 or Antec KUHLER H2O 920. I am really confused between those two. Can anyone kindly suggest me which one is better in closed water cooling system?

I am having kuhler 620 in my system which was home build. I have never got the temperatures to cross over 60. It usually at the temperature of 32-33 it gets idle. In Raven 2 I am having one fan. The fan over there is unable to work properly. I don’t know why. As I don’t know how to make the settings I have not made any settings in the fan. But anyhow, I am happy with the kuhler 620, which is working properly and I have never seen any problem in it.

You can see that the radiator of the Kuhler H2O 920 is much thicker than the Corsair Hydro H70. The cold plates of the Kuhler are of new generation and also the pump. Also the Kuhler H2O 920 has special utility software known as Chill Control V for the improvements. This allows the user to set the configuration of the cooler, and they can also adjust the configurations that were preset. There are two preset; Extreme and Silent.

To get the best water cooled system is the one that you built by your own. You have many closed loop water cooling system that are available, they are: kuhler 920, Corsair H70 and also the Noctua DH14. In the closed loop water cooling system the sound is much low and more stable. You can also find a led in the Antec 920 which gives the best look on the pump. Also it has the Software that is helpful for configuring your fans.

I am very much interested in going it with the Antec Kuhler H2O 920 as it is much thinner, but you will find that the Antec is not much available in the market. Also it is little bit costlier than Corsair Hydro H70. Also the wires of Antec 920 are much flexible, than Corsair cooler. You can find that the fan in the Antec runs from the 4600 RPM to 2400 RPM that also with the less noise. So I would really prefer to Antec 920 which is the best closed loop water cooling system I have ever seen.

I found that the Antec Kuhler H2O 920 is easy to install and also gives the maximum performance, it also does not require any maintenance. It provides efficient cooling as it has copper cold plates of the 3rd generation. It also provides the software which will help to control the performance of the Kuhler H2O 920. It will provide you the best cooling that you want. But if you can’t spend much on this then I would prefer you to switch to Noctua NH-D14.