TechArena Community

TechArena Community (
-   Operating Systems (
-   -   Unable to start OS recovery (

DevenderD 21-05-2011 01:23 AM

Unable to start OS recovery
My Notebook tx2 1375dx until working properly, but now it starts showing some error message with some code. Code is like 0x000000f. Everything working properly, laptop gets start normally, bios configuration OK.but when OS gets Start it shows the error and stuck there, by repeatedly showing message box, with ?Ok? button. After clicking on Ok Button then also it won?t able to load OS. Can anyone help me out and make me understand about this error code.

Beothuk 21-05-2011 01:24 AM

Re: Unable to start OS recovery
Notebook tx2 1375dx is come with a pre-installed with a Windows 7 professional of 64bits.according to Error code this indicate the Boot manager problem. Your operating system is not able to boot, so it showing error message. Simply fix the boot manager. This may cause due to the recent hardware and software changes that you have done. The error messages need to fix the winload.exe file, which may get corrupted due to changes in the hardware and software

Algonkin 21-05-2011 01:25 AM

Re: Unable to start OS recovery
Simply go for repair option after inserting windows 7 re-installation disk into the optical drive. The repair wizard will guide you to repair the winload.exe. This error code normally indicates the missing of winload.exe or winload.exe may get corrupt because of incompatible software /hardware. Simply insert the Disk in to drive and go for repair or normally start the windows in the safe mode and download the third-party and try to fix the winload.exe. This is easily available on internet you can get it from there.

Odalis 21-05-2011 01:25 AM

Re: Unable to start OS recovery
Via ?boot loader setup? section
EasyBCD, which has a multiple option for recovery depending upon how badly your winload.exe is damage or misplaced?
  • Run EasyBCD and go to the boot setup windows.
  • Select ?install windows7/vista boot loader to mbr? from the second menu, and then click on write mbr
  • Select ?Reset EasyBCD Configuration? then ?performs action ?to begin a recovery.
  • Select proper drive for installation. Now boot loader will reset your BCD data and re-config your boot loader correctly.

Kickapoo 21-05-2011 01:26 AM

Re: Unable to start OS recovery
  1. By booting from the re-installation DVD disk
  2. Put your Windows 7 DVD disk into your optical drives (DVD drive) and reboot your system.
  3. Verify that you have properly config your bios configuration. Or select boot from option and select optical drive, now you can get prompt to ?press any key to from CD/DVD? after a minute you will be able to see a window with repair option. Select ?repair your computer? to continue
  4. Proceed with the repair process by choosing ?startup repair?.
  5. Window will attempt to repair its boot loader. After it is done a prompt with message ?issue solved? and reboot the system.

All times are GMT +5.5. The time now is 01:27 PM.