bccode : 1000000a bcp1 : 00000004 bcp2 : 000000ff bcp3 : 00000001 bcp4 : 80545ec2 osver : 5_1_2600 sp : 3_0 product : 256_1
My computer keeps restarting and says that the system has recovered from a serious error..these are the details of the error:
bccode : 1000000a bcp1 : 00000004 bcp2 : 000000ff bcp3 : 00000001 bcp4 : 80545ec2 osver : 5_1_2600 sp : 3_0 product : 256_1
can you please help me
Re: bccode : 1000000a bcp1 : 00000004 bcp2 : 000000ff bcp3 : 00000001 bcp4 : 80545ec2 osver : 5_1_2600 sp : 3_0 product : 256_1
Can you get into My Comp > Properties > Advanced > Settings under Start up & Recovery and turn off automatically restart on System failure. After that if you can get any Blue Screen error code then please post it here. It might be either a ram fault or could be also a driver clashing problem in your computer, so try to have a look at both this things by removing or uninstalling it.
Re: bccode : 1000000a bcp1 : 00000004 bcp2 : 000000ff bcp3 : 00000001 bcp4 : 80545ec2 osver : 5_1_2600 sp : 3_0 product : 256_1
ok will let you know,and thank you
1 Attachment(s)
Re: bccode : 1000000a bcp1 : 00000004 bcp2 : 000000ff bcp3 : 00000001 bcp4 : 80545ec2 osver : 5_1_2600 sp : 3_0 product : 256_1
I got the blue screen.I attached it as a jpeg so I'm not sure how this site works and I hope you are able to see it.
Also today I got this error after I restarted :
BCCode : 1000008e BCP1 : C000001D BCP2 : BA463C82 BCP3 : 80551048
BCP4 : 00000000 OSVer : 5_1_2600 SP : 3_0 Product : 256_1
Re: bccode : 1000000a bcp1 : 00000004 bcp2 : 000000ff bcp3 : 00000001 bcp4 : 80545ec2 osver : 5_1_2600 sp : 3_0 product : 256_1
I should have mentioned that last month my computer crashed and I had someone repair it.The hard drive was changed and memory was added
Re: bccode : 1000000a bcp1 : 00000004 bcp2 : 000000ff bcp3 : 00000001 bcp4 : 80545ec2 osver : 5_1_2600 sp : 3_0 product : 256_1
If you are able to boot into safe mode, then it likely means to be a driver problem, so first one to check is the graphics driver, see if a updated video driver is available for download. If that doesnt work then try removing and reseating all cards, memory, and cables (both ends when possible) - actually remove and replace - do not just snug (on a PC) and clean out the dust as well if you can.
Re: bccode : 1000000a bcp1 : 00000004 bcp2 : 000000ff bcp3 : 00000001 bcp4 : 80545ec2 osver : 5_1_2600 sp : 3_0 product : 256_1
ok....will see how that goes