How to get Novatel Ovation MC950D USB modem with UMTS, EDGE, GPRS working in windows XP

I could not get this thing to function on Windows XP SP2, but it worked approximately right away on Linux. As I was not able to utilize the Windows software to initialize my SIM card I utilized a trick I read in a Huawei, the Huawei E220 USB modem is extremely same feature wise to this one. I place the SIM card in an extra phone and initialized it there. I as well utilized the phone's setup functions to eliminate the PIN code from the SIM; or else you would in fact require the Windows software to enter it at any time you utilized this? Not sure.

/etc/wvdial.conf:

Code:

---

[Dialer Sunrise]
Modem = /dev/ttyUSB1
Baud = 460900
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0&C1 &D2
ISDN = 1
Modem Type = USB Modem
Phone = *91#
Username = ''
Password = ''

---

Now while you utilize the modem it will primary show up as virtual CD ROM and not be observable as USB modem. So I wrote this script '/usr/bin/sunrise.sh':

Code:

---

#! /bin/bash
sudo modprobe -r usbserial
sudo eject /dev/scd1
sudo modprobe usbserial vendor=0x1420 product=0x4300
sleep 4
wvdial Sunrise

---

And because I am a lazy person, I shaped myself a novel launcher with a good icon which executes this command:

Code:

---

gksudo 'gnome-terminal -x /usr/bin/Sunrise.sh'

---

So, now all I have to perform is to connect the USB modem into my Linux laptop, wait until the effective CD ROM fraction gets raised and after that click on the symbol. I get asked my password and remain occurs automatically.

I have the MC950D as well and I attempted to obtain it sprint the way it is explained here. But it does not work correctly. I have solved it this method: First I shaped a novel UDEV-Rule /etc/udev/rules.d/80-umts_stick.rules:

Code:

---

SUBSYSTEM=="block", ATTRS {vendor} =="Novatel", ACTION=="add", RUN+="/usr/bin/eject %k"

---

This method I resolved the trouble with the CD ROM. I can stack the USB serial module with my properties. That for me edited /etc/modprobe.d/options and inserted the below line:

Code:

---

options usbserial vendor=0x1420 product=0x4300

---

No I have the essential devices and configured KPPP. I think this is a improved way then writing the bath script. I wish I could assist you.

How do you attach a laptop to a modem that’s previously connected to a computer? I have this PC which is joined to the modem. Is there a method you can utilize a laptop to attach it to the modem also there is internet on both? I attempted connecting it but while I setup the Blueyonder disc it says that there is a USB error driver that I require to eliminate, I think I detached it but it still does not work. While I click the internet on the laptop it says dial up connection and after that failed to setup a connection.

Why do people think that Internet arrives with a modem? How do I configure my router devoid of a modem? I have cable internet which comes directly into my house with no any modem. It is all the time on and I have a static IP. So how can I build up my router? It presumes that since I have cable internet, I have a cable modem. My investigation on the web all the time presumes a modem. Truly Puzzling!