Printable View
Just finished installing Windows 7 64 bit on my system. I have a Linksys router attached to the system. The issue with pc is that it is not finding any wifi network connection. What I know here is that everything is per-configured and I does not need to do anything. Just connect the modem and it founds the network. So I did the same. but right not I am not getting any further success here.
Windows 7 detects the wireless network and displays the list of available networks and that the installation was already filled out the type of network, residential system, also called Home Network. By clicking on the Network icon in the wireless notification area, the list of detected networks appears. Click Connect. If there is no notification provided there then it shows that the wifi is not detected in your system.
The icon appears WLAN without the yellow star. This shows that the The WiFi network is functional. Update your modem drivers first. If Windows 7 does not correctly detect the wireless network or if the network is not yet within reach, you can configure it manually. This is possible by doing the same from Network and Sharing Center. There you can see the current indication of your network. This is mostly a driver issue.
Check once that your system is not much away from the router. In the Notification area, make a right-click the wireless network icon and select Open Network and Sharing Center. Then in the Network and Sharing Center, click Manage wireless networks. In the interface of the management of networks, click Add. The wizard opens, click on Create a network profile manually.
Manual configuration of Wifi network is quiet a complicated job but the same is worked most of the time when you face error while setting up a wifi support. While setting up a wifi you need a Network Name which is the SSID (Service Set Identifier) that identifies the wireless network according to IEEE 802.11. You have to select the type of security. The WEP encryption of the first generation is used which consists of 26 hexadecimal characters and WPA with WPA2 for more secure mechanism for encrypting data, which can contain up to 63 characters.
In case of failure or problem, Windows 7 includes tools to diagnose and troubleshoot Network. Right-click the Network icon in the notification area, select Troubleshoot. Then click on start > run and type % Systemroot% \ Diagnostics \ system \ Networking \ DiagPackage.diagpkg. Then give OK. The diagnostic tool starts. If the problem is identified, a solution is proposed by tool.
To work with the Zero Configuration, it is first necessary that the wireless is enabled at startup. So we will check this setting or change it if necessary. Go to the Start menu, then Run and type services.msc. You get a window with all local services in Windows. In this list, search for the corresponding service network and make sure that it is set on automatic. Once the automatic configuration service wireless is active, it remains to enable network management by windows.