Noctua NH-D14 Cooler performance
hi
Noctua NH-D14 Cooler that i found hottest and coolest cooler for my cpu but before buying this cooler i wanted to ensure about its performance so if any one computer geek or user of this cooler please reply your opinion about this cooler .
thank you
Re: Noctua NH-D14 Cooler performance
Its dimensions are: 160 x 140 x 130mm (H x W x D) and weighs 900 grams. After mounting the two fans, it increases to 1240 grams, which can no longer be a problem for motherboards, so before buying one should look into your mobo manual. Radiator is not the highest, with 160 mm should easily fit in 90% of the enclosures on the market. Cooling NH-D14 is compatible with LGA 1366, LGA1156, LGA775, AM2, AM2 + and AM3.
Re: Noctua NH-D14 Cooler performance
Depending on the motherboard and case i encounter various problems, one of the frequent cases turns out to be 140 mm fan assembly, which requires little space and the cooling plate, and unfortunately in this part of the boxes missing. The solution turns out to assembly NF-P14 FLX . Its work proves to be possible in principle, then I felt did not specifically increased vibration. Another problem is the proximity of slots of RAM.
Re: Noctua NH-D14 Cooler performance
According to the manufacturer's recommendations larger graph 140 fan should be mounted between the aluminum heat sinks, but one of the outer part of your site is NF-P12, which ulna mode runs at 900 RPM. Installation is carried out by means of special clasps which pass through holes in the frame of fans, which are rubber hooks. It is very convenient and fast way, which in addition allows you to adjust the height of the fans in relation to the heat sink.
Re: Noctua NH-D14 Cooler performance
Certainly this is an extremely efficient cooler, but I think only a few fanatics will enable you to such equipment with its value, Note that it is just below in rank to Scythe Mugen 2 , Well, I found the equipment already on site . I guess there is nothing more to write about.
Re: Noctua NH-D14 Cooler performance
the asymmetric heat sink is not encroaching on the next memory location. The anti-vibration system was also reviewed and improved. Before it was just an adhesive tape to come keeping position but was not perfect after some assembly / disassembly. Now it is the block that is inserted into the radiator, keeping the shot is excellent.