Realistic STA 2700 stereo receiver
Realistic STA-2700 AM/FM Stereo Receiver combines 100 watts per channel of clean power, efficient state-of-the-art circuitry, and a full- function wireless remote control. This combination gives you the power to accurately reproduce any signal source (including a CD player) and drive any home speaker system. Plus, you can control most of the features of your stereo system from your easy chair.
The CMOS LSI frequency-synthesized tuner and the large digital frequency display make radio tuning both precise and simple. And the FM sections dualgate MOS FET front-end reduces the possibility of overloading by strong local signals.
The STA-2700 provides connections for two tape decks, a turntable, and three other audio signal sources (CD player, VCR, and TV, for example).This is ideal for the large number of components in today's combination audio/video systems.
Re: Realistic STA 2700 stereo receiver
Features of Realistic STA 2700 stereo receiver
- Flat Frequency Response : Assures accurate sound reproduction from 15 to 25,000hertz.
- Low Distortion : You use the full power of the amplifier without compromising the sound quality.
- Three "Detented" Tone Controls : Allow independent adjustment of bass, treble, and midrange frequencies.
- Two-Way Tape Dubbing :Lets you copy tapes to or from either tape deck, while listening to another signal source. Of course, you can monitor either tape deck if you wish.
- Six Tuner Memory Buttons : let you program six AM and six FM radio stations for one-button tuning.
- FM Mute :Eliminates noise when you tune from one FM station to another.
- Sub Filter : reduces low-frequency noise that wastes amplifier power, without adversely affecting the low-frequency portion of the program material.
- Terminals for External Antenna : let you connect external AM and FM antennas for optimum radio reception. However, the supplied AM loop antenna and the FM line-cord antenna provide adequate reception in most metropolitan areas.
- Protection Circuits : help prevent damage from overheating or overdriving of the amplifier. The STA-2700 is also fuse-protected from power surges and short circuits.
Re: Realistic STA 2700 stereo receiver
Specification of Realistic STA 2700 stereo receiver
- AMPLIFIER
- 100 watts per channel(minimum RMS power, both channels driven)
- IM Distortion (80 watts, 60/7,000 Hz):0.01%
- Phono Equalization :RIAA +/- 2 dB
- Tone Control Action:
- Bass : +/- 10 dB at 100 Hz
- Midrange :+/- 6 dB at 1.5 kHz
- Treble :+/- 10 dB at kHz
- Total Harmonic Distortion (80 Watts):
- 20 Hz=0.01%
- 1 kHz=0.01%
- 20 kHz=0.02%
- Loudness Compensation : (-30 dB):
- FM TUNER
- IHF Sensitivity (3% THD) : 1.7 microV, IHF (9.8 dBf)
- Limiting Sensitivity (-3 dB): 1.2 microV (6.8 dBf)
- Signal-to-Noise Ratio:70 dB
- Capture Ratio: 1.5 dB
- Image Rejection:70 dB
- IF Rejection:85 dB
- Selective:70 dB
- Stereo Separation at 1,000 Hz: 52 dB
- Sensitivity (for 20 dB S/N):
- Radiated : 350 microV/m
- Terminal : 25 microV
- Image Rejection : 40 dB
- IF Rejection : 40 dB
- AGC Figure-of-Merit : 50 dB
- Total Harmonic Distortion (10 mV/m) : 0.8%
- Signal-to-Noise Ratio (10 mV/m) : 45 dB
- RF Interference Rejection : Rated Excellent
- Power Requirements : 120 VAC, 60 Hz, 340 watts max.(240 VAC, 50 Hz for Australian Models)
- Weight (Net) : 23.3 lbs lbs (10.6 kg)